Use the at end of the wheel wrench and pry along the
edge of the cover until it comes off. The edge of the
wheel cover could be sharp, so do not try to remove it
with your bare hands. Do not drop the cover or lay
it face down, as it could become scratched or damaged.
Once you have removed the wheel cover, use the
following procedure to remove the at tire and install the
spare tire.
1. Turn the wheel wrench
once on each wheel nut
to loosen them. Do not
remove them yet.
2. Find the jacking location using the diagram. For
jacking at the vehicle’s front location, put the jack
lift head (C) about 6 inches (15 cm) from the
rear edge of the front wheel opening (B). Line up
the jack with the arrow (A) as shown.
5-92
