2006 NISSAN MAXIMA light

NAV2787
SETTING BY PHONE NUMBER
INFO:
. If the area code of the specified telephone
number does not exist in the map data, the
system will not search for the location.
. Only the locations included in the database
in the map DVD-ROM can be searched by
the phone number. Personal phone numbers
cannot be used to search for a location.
1. Highlight [Others] and push .
NAV2815
2. Highlight [Phone Number] and push
.
The telephone number input screen is
displayed.
NAV2816
3. Enter the telephone number including the
area code.
4. After finishing the entry, highlight [Map] and push .
“PHONE NUMBER INPUT SCREEN”
(page 2-26)
4-46
Setting a destination

NAV2817
5. The selected destination is displayed at thecenter of the map. Highlight [OK] after
confirming the location of the displayed
destination, and push .
The system sets the destination to the
selected location and starts calculating a
route.
NAV2818
INFO:
Even after setting a destination, you can
adjust the location of the destination, store
the route, etc.“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-50)
NAV2787
SETTING A NEARBY PLACE1. Highlight [Others] and push .
Setting a destination
4-47

NAV2819
2. Highlight [Nearby Places] and push .
NAV2820
3. Highlight the preferred destination facility
and push .
A list screen is displayed.
INFO:
If there is any particular facility type that you
intend to use frequently, you can store it in
the list of nearby facilities.“CUSTOMIZING NEARBY PLACES”
(page 6-33)
NAV2821
4. Highlight the preferred destination from the list, and push .
The position of the selected location is
displayed in the preview on the right side
of the screen.
4-48
Setting a destination

NAV2822
INFO:
If the suggested route is already set, by
highlighting [Show Along Route] and push-
ing , the system displays only the
facilities located along the route.
NAV2823
5. The system sets the destination to the selected location and starts calculating a
route.
INFO:
If the route is already set, the selected
location becomes a waypoint.
NAV2824
INFO:
You can also set the destination by pushing
in the current location map
screen and selecting [Nearby].
Setting a destination
4-49

ADJUSTING THE LOCATION OF THE
DESTINATIONYou can adjust the location of the destination by
moving the cross pointer across the map.
NAV2864
1. Set the destination using an appropriatemethod.
2. Highlight [Alter Location] and push .
NAV2865
3. Adjust the location by moving the cross
pointer across the map and push
.
The location of the destination is modified.
Setting a destination
4-51

ADDING ADDITIONAL DESTINATIONS
TO A ROUTEEven after the route is already set, you can add a
searched location as a new destination or
waypoint to that route.
If the route has not been set, [Add to Route]
cannot be selected.
NAV2866
1. Set the destination using an appropriatemethod.
2. Highlight [Add to Route] and push .
NAV2867
3. Highlight [Destination] or [Waypoint] and
push .
4-52
Setting a destination

VIEWING INFORMATION ABOUT THE
SEARCHED LOCATIONInformation (street address and phone number)
about facilities stored in the map DVD-ROM
data can be displayed.
NAV2868
1. Set the destination using an appropriatemethod.
2. Highlight [POI Info] and push
.
NAV2869
3. Information about the location is displayed.
4. Push
, or highlight [Back] and
push to return to the previous
screen.
Setting a destination
4-53

STORING A LOCATIONA searched location can be stored in the
Address Book. Then it can be easily retrieved
and set as a destination (or waypoint) .
NAV2870
1. Set the destination using an appropriatemethod.
2. Highlight [Store Location] and push .
NAV2871
3. The location is stored in the Address Book.
The corresponding icon is displayed at the
set location on the map.
4-54
Setting a destination