2006 NISSAN MAXIMA light

There are several methods you can use to set
your destination. Understand the advantages of
each method and select the best method for
finding and setting your destination.BASIC OPERATION1. Push
.
2. Highlight the preferred destination setting method and push .
NOTE:
There may be a case that you cannot
search by pointing at “Street Address”,
“Intersection” and “Point of Interest
(POI)”. This is because the map DVD-
ROM data of Nunavut in Canada is un-
developed.
NAV2773
Available setting items. Street Address:
Searches for a destination by address.
. Address Book:
Searches for a destination from the list of
stored home and the stored locations. .
Previous Destinations:
Searches for a destination from the previous
destinations.
. Points of Interest:
Searches for a destination from various
categories of businesses or locations.
DESTINATION SCREEN4-2
Setting a destination

NAV2825
SETTING A STREET ADDRESS1. Highlight [Street Address] and push .
A character input screen is displayed.
NAV2826
INFO:
Character input screen for Street Address
&1
Region:
The region previously entered is auto-
matically displayed. It can be changed.
&2
City:
“All” is displayed, and all cities in the
region are available. Route calculation
conditions can be narrowed down by
entering the name of the city.
&3
Street:
Enter the name of a street.
&4
House No.:
A house number can be entered.
&5
Symbols/A-Z:
Symbol keys are displayed by high-
lighting [Symbols] and pushing
. Alphabet keys are dis-
played by highlighting [A-Z] and push-
ing .
Setting a destination
4-5

NAV2827
2. Enter the house number, highlight [OK] andpush .
If you do not know the house number,
highlight [OK] or [Skip] and push
.
NAV2828
3. Enter the name of the street. After finishing
the entry, highlight [OK] and push
. A list of cities is displayed.
NAV2829
4. Highlight the correct city of the destination
from the list and push .
4-6
Setting a destination

NAV2830
5. The selected destination is displayed at thecenter of the map. Highlight [OK] after
confirming the location of the displayed
destination, and push .
The system sets the destination to the
selected location and starts calculating a
route.
NAV2831
INFO:
Even after setting a destination, you can
adjust the location of the destination, store
the route, etc.“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-50)
NAV2832
Changing the region1. Highlight [Region] and push
to
change the region.
Setting a destination
4-7

NAV2833
2. Highlight the preferred region and push .
A character input screen is displayed.
NAV2834
Specifying a city1. Highlight [City] and push
to
narrow down the route calculation condi-
tions by entering the name of the city.
NAV2835
2. Enter the name of the city, highlight [OK] and
push .
A list screen is displayed.
INFO:
.
Highlight [All Cities] and push
to include all cities in the
region as the route calculation condition.
.
Highlight [Last 5 Cities] and push
to display 5 cities recently
set as destinations.
4-8
Setting a destination

NAV2836
3. Highlight the city of the destination from thelist and push .
Setting a destination
4-9

NAV2787
SETTING A CITY CENTER1. Highlight [Others] and push.
NAV2837
2. Highlight [City Center] and push
.
A character input screen is displayed.
NAV2838
INFO:
Character input screen for City Center
&1
Region:
The region previously entered is auto-
matically displayed. It can be changed.
&2
City:
“All” is displayed, and all cities in the
region are available. Route calculation
conditions can be narrowed down by
entering the name of the city.
4-10
Setting a destination

&3
Symbols/A-Z:
Symbol keys are displayed by high-
lighting [Symbols] and pushing
. Alphabet keys are dis-
played by highlighting [A-Z] and push-
ing .
NAV2839
3. Highlight [City] and push
to
narrow down the route calculation condi-
tions by entering the name of the city.
Enter the name of the city, highlight [OK] and
push .
A list screen is displayed.
INFO:
Highlight [Last 5 Cities] and push
to display 5 cities recently set
as destinations.
NAV2840
4. Highlight the preferred destination from the list and push .
The position of the selected location is
displayed in the preview on the right side
of the screen.
Setting a destination
4-11