2006 MITSUBISHI COLT lock

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-13
TURN-SIGNAL LAMP OPERATION SOUND FUNCTION (T HE INITIAL CONDITION:
WITHOUT FUNCTION)
AC206262AB
Turn signal
lamp switch

(RH) OFFON
Turn signal
lamp (RH)
OFFON
OFF ON
Turn signal
lamp (LH) Turn signal
lamp switch
(LH) OFFON
Hazard lamp
switch OFFON
Hazard lamp OFFON
ON (Buzzer sounds)
OFF (Buzzer
does not sound)
Buzzer
output
ET
ACS-ECU buzzer soun ds simult an eously with the
blin
ks of the turn-signal lamp an d the h a zard lamp.
NOTE: Av ailability of the turn-signal lamp op eratio n
tone fu
nction can be sele cted by th e cu stomize func
-
tion (Refer to P.54B- 25).
CENTRAL DOOR LOCKING SYSTEM
CENTRAL DOOR LOCKING CONTROL
FUNCTION
AC101496
AC
t
t
ON
OFF ON
OFF ON
OFF
ON
OFF
t: 0.25 second
Lock switch
Lock relay output
Unlock relay output Unlock switch
When th e front doors are locked (when the lock
switch turns ON a
f te r turning OFF the u n lock switch
in the driver's door lo
ck a c tuat or), ET ACS-ECU turn s
ON the
lock relay o u tput fo r 0.25 second, a nd lo cks
all
doors (including th e t a ilg ate).
When the front doors is unlo cke d (when th e unlock
switch turns ON
af ter turn ing OFF t he lock switch on
the driver's door
lock actuator ), ET ACS-ECU tu rns
ON the
unlock re lay outpu t for 0.2 5 se cond , and
unlocks all doors (in
c lu ding the t a ilgate).
SH IFT "P " POS I TIO N LIN K ED DOO R
UNLOCK FUNCTION (THE INITIAL
CONDITION: WITH FUNCTION)
AC208135AB
t
T
ON
OFF ON
OFF
Inhibiter switch "P"
Unlock relay output
t: 0.25 second
T: 0.3 second
When the se lector lever is shif ted to "P" position
(p
a r kin g ) (inh ibit or swit ch "P" is ON) with the ignition
switch turne
d to th e ON po sit i on, t he ET ACS-ECU
turns
on the u n lock re lay output for 0.25 second (0. 3
second af
ter the selector le ver o peration) an d
unlocks all the d
oors (including the t a ilga t e).
NOTE: Using a cust omisation fun c tio n , this fu nction
can b
e
ena bled or disabled. For more informatio n
about t
he customisatio n function , refer to
P.54B-25.

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-14
POWER WINDOW
POWER WINDOW TIMER FUNCTION
AC309963
Ignition switch (IG1)ON
(Open)ON
ON tt
OFF
t:30 seconds
(Close)OFF
OFF
Driver's door and
passenger's switch
Power window relay
AB
When the power window relay is turn ed ON with the
ignition
switch ON, t he power window relay is kept
ON for 3
0 seconds even af ter th e ign i tio n swit ch is
turned OFF
, enab ling the do or windo w to be o pened
and closed with
the po we r window switch .
If the dr ive r's or t he fron t p a ssenger d oor is ope ned
during
timer ope ration , the p o we r windo w re lay is
turned OFF a
t the same time.
KEYLESS ENTR Y SYSTEM
MU L T I-MODE KEYLESS ENT R Y SYST EM
The door mirrors can b e opera t ed by the keyless
entry transmitte
r opera t ion.
For the operation, re fer to Group 42 − Body − Key-
less ent ry s yste m P.42-13.
KEYLESS ENTR Y HAZARD
ANSW
ERBACK FUNCTION (INITIAL
SETTING:
LOCK, FLASH ONCE,
UNLOCK, FLASH TW
ICE)
AC209072AG
ON
OFF OFF
ON
OFF
LOCK
UNLOCK
Illuminate
Extinguish
Keyless entry
transmitter
Lock relay output
Unlock relay output
Hazard lamp
The ha
zard a n swer b a ck function that allows check-
ing the lock/u nlock st a t e of t he doo r easily eve n in
the daytime is in
st alled. Whe n the lock signal from
the keyless entry transmitter is received in
to
ET
ACS-ECU, all do ors (includin g the t a ilgat e) are
LOCK, an
d the tu rn signal lamp blinks once. Wh en
the unlock signal is rece
ive d , all doors (in c lu ding the
t
a ilgat e) are UNLOCK, and the turn-signa l la mp
blin
ks twi c e.
NOTE: The answer back blink time can be ad just ed
by th
e customise function (Re f er to
P.54B-25).

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-15
KEYLESS ENTRY ROOM LAMP ANSWERBACK FUNCTION (INITIAL SETTING: LOCK
FLASH ONCE, UNLOCK ILLUMI NATES FOR 15 SECONDS)
AC314090
OFFON
ON
OFF
Illuminate
Extinguish
Lock relay output
OFF
ONDoor unlock switch output
OFFON
Door lock switch output Unlock relay output
Hazard lamp
Illuminate
Extinguish
Interior lamp
AB
ab
c
a: 0.6 second
b: 1.2 seconds
c: 15 seconds
When the
ET ACS-ECU receives t he lock signa l from
the keyless entry transmit
t er , all doo rs (includin g t a il
-
gate) is locked and the interior lamp flashe s once in
syn
chron i za tion with the haza r d lamp op eratio n.
When th
e ET ACS-ECU receives the u n lock sign al,
all d
oors (including t a ilgate) is u n locked . The interior
lamp fades in, keep
s on, and fades out in 15 seconds
af
te r the d oor unlock rela y is ope rated. (15 se cond s
including fad
i ng p e riod)
NOTE: The answerb ack blink t i me can be adjuste d
by th
e customize function. (Re f er to
P.54B-25).

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-23
INTERIOR LAMP
INTERIOR LAMP DIMMER CONTROL FUNCTION (THE INITIAL CONDITION: 15 SEC-
ONDS)
AC31030515 seconds
(All closed) OFF
(Any one open) ON ON
OFF
Key removed ACC
100 % 0 %
60 %
Door switch
(Unlock) OFF(Lock) ON
Driver's door
lock actuator switch
(lock switch)
Interior lamp brightness
Ignition switch
15 secondsAC
Wh
en t h e int e r i or lamp switch is o n th e do or p o sitio n ,
ET
ACS-ECU controls the inte rior lamp lamp s as fol
-
lows.
1.Whe n the ignit i on switch is OFF:
By opening a n y d oor or t a ilgate , the lamp turns ON
(100 %), and dims (60 % ) when t he doo r or t a il
-
gate is clo s ed, then a nd turn s of f af ter 15 sec-
onds.
However , whe n the ignit i on switch is turned ON or
the door lock is operat ed, the lamp s turn of f a t
tha t time.
2.Whe n the ignit i on switch is ON:
By opening a n y d oor or t a ilgate , the lamp (100%)
turn s ON a nd OFF when t he doo r or t a il gate is
cl ose d .
3.Whe n all doors and the t a ilgate are close d , and
the ignition key is remo ved:
By removing the ignition key with a ll d oors a nd the
t a ilgate closed, th e lamp tu rns ON 60%, a nd
turn s of f af ter 15 seconds.
By inserting the ignition key again or op erating the
doo r lock wit h the lamp lit, the lamp s turns of f.
NOTE: For t he ve hicles with th e keyless e n try sys-
tem, the delaye d lamp-off time and t he ope ration
time
s of the keyless entry inte rior lamp answer b a ck
can b
e ch anged by th e cu stomise function (Re f er to
P.54B-25).

CUSTOMISE FUNCTION
SMART WIRING SYSTEM (SWS)54B-25
CUSTOMISE FUNCTION
M2541006000243
Using M.U.T.-III adjusts the following function. The
programmed information is held even when the bat
-
tery is disconnected.
•Vehicle speed-dependent wiper function
With the windshield wiper switch in the intermittent
position, the intermittent duration changes
depending on the intermittent adjusting knob
position and the vehicle speed.
•The selector "P" position-linked central door
unlocking function
When the selector lever is shifted to the "P" position,
all the doors unlock.
•Turn-signal lamp operation sound function
Synchronized with the hazard lamp and the turn sig-
nal lamp, the buzzer sounds.
•Dimmer interior lamp control duration
When the door is closed with the ignition switch
LOCK (OFF), the interior lamp is turned OFF
automatically in the specified time.
•Timer lock time after executing the keyless entry
unlock
If any door including a tailgate is not opened after
being unlocked with the keyless transmitter,
doors are locked automatically within the speci
-
fied time.
•Door-ajar warning function
Driving with any door, including a tailgate, not prop-
erly closed sounds the buzzer to let the driver
know the door-ajar state.
•Rear wiper intermittent duration
When the rear wiper switch is turned ON, the rear
wiper operates in the intermittent action. When
the rear wiper switch is turned from OFF to ON
two cycles, the rear wiper makes continuous
operation regardless of the intermittent operation
duration setting.
•Wiper linked with washer function
When this function is active, the windshield wiper
operates if the washer switch is turned ON.
•Hazard answer back function of the keyless entry
system
When lock/unlock is operated with the keyless entry
transmitter, the horn sounds so that the driver can
recognize the lock/unlock status of the vehicle
even if the driver is away from it.
•Initialising all functions (Returning to the initial
condition)
All adjusting functions are returned to the settings at
the time of factory shipment.
Item
No.Items shown
on M.U.T.-III
screenItemAdjustment items
shown on M.U.T.-III
screenAdjusting contents
4SPEED SEN
WIPVehicle
speed-dependent
wiper functionW.FUNCTIONWith function (Initial setting)
W/O FUNCTIONWithout function
9KEYLESS(HA
ZD)Hazard answer
back function of
the keyless entry
systemLOCK/UNLOCKWith function for lock/unlock (the initial
condition)
LOCKEDWith function only for lock
UNLOCKEDWithout function only for unlock
W/O FUNCTIONWithout function
14P UNLOCK
ACT.Door unlock
function linked
with "P" position
shift for centre
door lock systemW.FUNCTIONWith function
W/O FUNCTIONWithout function (the initial condition)
15T/SIG.BUZZE
RTurn-signal lamp
operation sound
functionW.FUNCTIONWith function
W/O FUNCTIONWithout function (the initial condition)

CUSTOMISE FUNCTION
SMART WIRING SYSTEM (SWS)54B-26
16RM LMP TN
OFFDimmer interior
lamp control
duration60s60 seconds
30s30 seconds
15s15 seconds (the initial condition)
7.5s7.5 seconds
W/O FUNCTION0 second (no delay action)
24KEYLES
LOCK TTimer lock time
after executing the
keyless entry
unlock30s30 seconds (the initial condition)
60s1 minute
120s2 minutes
180s3 minutes
26DOOR WARN
BUZDoor-ajar warning
functionW.FUNCTIONWith function (Initial setting)
W/O FUNCTIONWithout function
28R.INT WIPER
TRear wiper
intermittent
duration8s8 seconds: Without continuous
operation (Initial setting)
4s(W SUCSSON)4 seconds: With continuous operation
8s(W SUCSSON)8 seconds: With continuous operation
16s(W SUCSSON)16 seconds: With continuous operation
CONTIN ACTIONContinuous operation (without the
intermittence)
37WIP SYCR
WASHWiper linked with
washer functionW.FUNCTIONWith function (Initial setting)
W/O FUNCTIONWithout function
38KEYLES
HAZARDCustomise
function for
changing the
number of the
keyless hazard
warning lamp
answerback
flashingLOCK1,UNLOCK2LOCK: Flash once, UNLOCK: Flash
twice (Initial setting)
Whether the lamps flash or not is
determined by the keyless hazard
warning lamp answerback
customisation function.
LOCK2,UNLOCK1LOCK: Flash twice, UNLOCK: Flash
once
Whether the lamps flash or not is
determined by the keyless hazard
warning lamp answerback
customisation function.
39TURN-SIGNA
LTurn signal lamp
operation
condition
adjustment
functionIG-ONTurn signal lamp can be operated when
the ignition switch is turned ON (Initial
setting).
IG-ACCTurn signal lamp can be operated when
the ignition switch 1 is in ACC or ON
position.
Item
No.Items shown
on M.U.T.-III
screenItem Adjustment items
shown on M.U.T.-III
screenAdjusting contents

GENERAL INFORMATION
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)52B-3
CONSTRUCTION DIAGRAM
AC601639
AC207323
AC207321AC207230
AC601468
Driver's air bag
modulePassenger's (front)
air bag module
SRS-ECU
Diagnosis connector
Clock springSRS warning lamp
Seat belt with
pre-tensioner
Curtain air bag module
Front impact sensor
SRS-ECUSide impact sensor
Side-airbag module
AB
SRS warning lamp
SRS warning lamp

GENERAL INFORMATION
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)52B-4
SRS SYSTEM CIRCUIT DIAGRAM
AC401544
Ignition switch (IG1)
Combination
meter (SRS
warning lamp)
No.40
7.5A
Driver's
air bag
module ON
OFF OFF
ON ON
OFF
ON
OFF
ON
ON
OFF
Passenger's
(front)
air bag
moduleClock spring
ON
OFF
OFF ON
OFF ON
OFF
ON
OFF
ON
ON
OFF
ON
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Connector
lock switch*
Connector
lock switch* Connector
lock switch*Connector
lock switch*
Seat belt
pre-tensioner
(LH)
Seat belt
pre-tensioner
(RH)
Side-airbag
module
(LH)
Side-airbag
module
(RH)
Curtain air bag
module
(LH)
Curtain air bag
module
(RH) ON
OFF
OFF ON
ON
OFF
ON
ON
OFF
OFFONON
OFF
OFFON
OFF
ON
Connector
lock switch*
Connector
lock switch* Connector
lock switch*
OFFON
OFF
Connector
lock switch*Side impact
sensor (RH)
Side impact
sensor (LH)
Diagnosis
connector
Front impact
sensor (RH)
Front impact
sensor (LH)
Note
*: Connector
connected: ON Connector
disconnected: OFF
AB
SRS-ECU
ON
OFF
ON
OFF
ON
OFF
ON
OFF
OFF
ON
OFF OFF
No.37
7.5A