2006 MITSUBISHI COLT wiring

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-12
BUZZER
LAMP REMINDER BUZZER FUNCTION
AC208400AB
Tail lamp, headlamp
or fog lamp
Driver's
door switch
Buzzer
output
ON
OFF
ON (Open)
OFF (Closed)
ON (Buzzer sounds) OFF (Buzzer does not sound)
When th e ign i tio n ke y is removed and th en the
driver's d
oor is ope ned with turn ing ON the t a il lamp ,
fog la
mp o r head lamp, the b u zzer so unds con t inu
-
ously to alert the driver t hat the lamp is still ON.
However, if t he t a il lamp or th e headlamp is tu rned of f
by th
e head lamp auto m atic-shut down functio n , the
buzzer doe
s no t sou nd.
DOOR-AJAR WARNING BUZZER
FUNCTION (THE INIT
IAL CONDITION:
WITH FUNCTION)
AC101625AD
0 km/h 8 km/h
(Closed) OFF
(Opened) ON ON
OFF
Door or
tailgate
switch
Vehicle speed
Buzzer
output OFF
(Does not sounds) (Sounds) ON
Ignition switch
If the
ve hicle speed se nt fro m t he comb ination meter
via
CAN communication exceed s 8 km/h when a
door is op
en for o ne se cond or more, the
ET
ACS-ECU makes the door ajar in dicator lamp
flash 16 times and
activate s the buzzer (b eepin g 16
time
s) to inform the driver that a door is o pen.
NOTE: Av ailability of the door -a jar alarm function
can b
e
se lected by the cust omize fu nction (Refer to
P.54B-25).
Interio r lampInterior lamp dimme r cont rol fun c tionETA C S-ECUP.54B-23
Ignition ke y cylinder illuminatio n lamp
control functionP.54B-24
Door-ajar indicatorP.54B-24
Customize functionETA C S-ECURefer to
P.54B-25.
Function C ontrol ECU Function
descriptio n

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-13
TURN-SIGNAL LAMP OPERATION SOUND FUNCTION (T HE INITIAL CONDITION:
WITHOUT FUNCTION)
AC206262AB
Turn signal
lamp switch

(RH) OFFON
Turn signal
lamp (RH)
OFFON
OFF ON
Turn signal
lamp (LH) Turn signal
lamp switch
(LH) OFFON
Hazard lamp
switch OFFON
Hazard lamp OFFON
ON (Buzzer sounds)
OFF (Buzzer
does not sound)
Buzzer
output
ET
ACS-ECU buzzer soun ds simult an eously with the
blin
ks of the turn-signal lamp an d the h a zard lamp.
NOTE: Av ailability of the turn-signal lamp op eratio n
tone fu
nction can be sele cted by th e cu stomize func
-
tion (Refer to P.54B- 25).
CENTRAL DOOR LOCKING SYSTEM
CENTRAL DOOR LOCKING CONTROL
FUNCTION
AC101496
AC
t
t
ON
OFF ON
OFF ON
OFF
ON
OFF
t: 0.25 second
Lock switch
Lock relay output
Unlock relay output Unlock switch
When th e front doors are locked (when the lock
switch turns ON a
f te r turning OFF the u n lock switch
in the driver's door lo
ck a c tuat or), ET ACS-ECU turn s
ON the
lock relay o u tput fo r 0.25 second, a nd lo cks
all
doors (including th e t a ilg ate).
When the front doors is unlo cke d (when th e unlock
switch turns ON
af ter turn ing OFF t he lock switch on
the driver's door
lock actuator ), ET ACS-ECU tu rns
ON the
unlock re lay outpu t for 0.2 5 se cond , and
unlocks all doors (in
c lu ding the t a ilgate).
SH IFT "P " POS I TIO N LIN K ED DOO R
UNLOCK FUNCTION (THE INITIAL
CONDITION: WITH FUNCTION)
AC208135AB
t
T
ON
OFF ON
OFF
Inhibiter switch "P"
Unlock relay output
t: 0.25 second
T: 0.3 second
When the se lector lever is shif ted to "P" position
(p
a r kin g ) (inh ibit or swit ch "P" is ON) with the ignition
switch turne
d to th e ON po sit i on, t he ET ACS-ECU
turns
on the u n lock re lay output for 0.25 second (0. 3
second af
ter the selector le ver o peration) an d
unlocks all the d
oors (including the t a ilga t e).
NOTE: Using a cust omisation fun c tio n , this fu nction
can b
e
ena bled or disabled. For more informatio n
about t
he customisatio n function , refer to
P.54B-25.

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-14
POWER WINDOW
POWER WINDOW TIMER FUNCTION
AC309963
Ignition switch (IG1)ON
(Open)ON
ON tt
OFF
t:30 seconds
(Close)OFF
OFF
Driver's door and
passenger's switch
Power window relay
AB
When the power window relay is turn ed ON with the
ignition
switch ON, t he power window relay is kept
ON for 3
0 seconds even af ter th e ign i tio n swit ch is
turned OFF
, enab ling the do or windo w to be o pened
and closed with
the po we r window switch .
If the dr ive r's or t he fron t p a ssenger d oor is ope ned
during
timer ope ration , the p o we r windo w re lay is
turned OFF a
t the same time.
KEYLESS ENTR Y SYSTEM
MU L T I-MODE KEYLESS ENT R Y SYST EM
The door mirrors can b e opera t ed by the keyless
entry transmitte
r opera t ion.
For the operation, re fer to Group 42 − Body − Key-
less ent ry s yste m P.42-13.
KEYLESS ENTR Y HAZARD
ANSW
ERBACK FUNCTION (INITIAL
SETTING:
LOCK, FLASH ONCE,
UNLOCK, FLASH TW
ICE)
AC209072AG
ON
OFF OFF
ON
OFF
LOCK
UNLOCK
Illuminate
Extinguish
Keyless entry
transmitter
Lock relay output
Unlock relay output
Hazard lamp
The ha
zard a n swer b a ck function that allows check-
ing the lock/u nlock st a t e of t he doo r easily eve n in
the daytime is in
st alled. Whe n the lock signal from
the keyless entry transmitter is received in
to
ET
ACS-ECU, all do ors (includin g the t a ilgat e) are
LOCK, an
d the tu rn signal lamp blinks once. Wh en
the unlock signal is rece
ive d , all doors (in c lu ding the
t
a ilgat e) are UNLOCK, and the turn-signa l la mp
blin
ks twi c e.
NOTE: The answer back blink time can be ad just ed
by th
e customise function (Re f er to
P.54B-25).

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-15
KEYLESS ENTRY ROOM LAMP ANSWERBACK FUNCTION (INITIAL SETTING: LOCK
FLASH ONCE, UNLOCK ILLUMI NATES FOR 15 SECONDS)
AC314090
OFFON
ON
OFF
Illuminate
Extinguish
Lock relay output
OFF
ONDoor unlock switch output
OFFON
Door lock switch output Unlock relay output
Hazard lamp
Illuminate
Extinguish
Interior lamp
AB
ab
c
a: 0.6 second
b: 1.2 seconds
c: 15 seconds
When the
ET ACS-ECU receives t he lock signa l from
the keyless entry transmit
t er , all doo rs (includin g t a il
-
gate) is locked and the interior lamp flashe s once in
syn
chron i za tion with the haza r d lamp op eratio n.
When th
e ET ACS-ECU receives the u n lock sign al,
all d
oors (including t a ilgate) is u n locked . The interior
lamp fades in, keep
s on, and fades out in 15 seconds
af
te r the d oor unlock rela y is ope rated. (15 se cond s
including fad
i ng p e riod)
NOTE: The answerb ack blink t i me can be adjuste d
by th
e customize function. (Re f er to
P.54B-25).

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-16
WINDSHIELD WIPER AND WASHER
INTERMITTENT CONTROL SPEED-DEPENDENT VARIABLE TYPE>
(THE INITIAL CONDITION: WITH FUNC
-
TION)1.
AC314042AB
FAST SLOW
0
32
Variable intermittent wiper
control switch position
Intermittent time
T1 (seconds)
Change in intermittent time by variable
intermittent wiper control volume
(when vehicles is stationary)
AC314043
Intermittent
time T1
(seconds)
Vehicle speed (km/h)
When at SLOW position
Change in intermittent time according
to vehicle speed
0 100
AB
60
40
30
14
14 19 22 25 32
4.6
1.6
2.0
When at FAST position
The ET ACS-ECU calculates the win d shield intermit-
tent wiper interval T1 from the wind shield inter-
mittent wiper volume an d veh i cle speed sign al
(sent from the
combina t ion meter to the
ET
A C S-ECU via CA N communication).
NOTE: The vehicle spe ed-sensitive function can be
adjuste d by the custo m ise fun c tion (Refer to
P.54B-25).
2.
AC101493AF
ON
OFF ON
OFFWindshield
wiper auto-
stop signal
Windshield
wiper relay
T1 T1 T1
When ET ACS-ECU receives th e windshie l d intermit-
tent wiper switch ON signa l from the colu mn
switch while t
he ig nition switch is in the ACC or
ON
position, it tu rns th e windshie l d wipe r rela y
ON
to opera t e the windshield wiper at low speed .
3.Whe n the windsh i eld wiper comes to the stop
position, th e windshie l d wipe r auto stop sig nal
turn s OFF . T hen the windshield wipe r relay will
turn OFF , and the win d shield wiper stop s op erat
-
ing.
4. Whe n the intermitten t time T1 h a s e l ap sed af ter
the windshield wiper relay was t u rned OFF ,
ET A C S-ECU turns ON the windshield wiper relay
aga in an d repe at s the a bove procedure.
MIST WIPER CONTROL
AC207004AB
ON
OFF
ON
OFF
ON
OFF
ON (HIGH)
Windshield mist
wiper switch
Windshield wiper
auto-stop signal
Windshield wiper
relay
Windshield wiper
speed switching
relay
OFF (LOW)
When
the windshield mist wipe r switch of t he column
switch is turne
d ON with the ignition switch in th e
ACC or ON positio
n, ET ACS-ECU turns ON the
windshield wiper
drive signal . At the same time, the
wiper speed switch rela
y turn s to ON (HIGH). W hen
the wind
shield mist wiper switch is ON, th e wind
-
shield wipe r ope rates at the high spee d.

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-17
LOW SPEED WIPER AND HIGH SPEED WIPER CONTROL
AC005437AB
ON
OFF
ON
OFF
ON
OFF
(HI) ON
Windshield low speed
wiper switch
Windshield high speed
wiper switch
Windshield wiper auto-stop
signal
ON
OFF
Windshield wiper
drive signal
Windshield wiper speed
switching relay
(LO) OFF
Low speed operations High speed operations
When the windshie l d low spee d wiper switch of th e
colu
mn switch is turned ON while the ignition switch
is ACC or ON, the colu
mn switch turns ON the wind
-
shield wip e r drive signa l. Also, the wiper speed
switching relay turns to OFF (LO), and the windshield
wiper op
erates at the low speed.
When the windshie l d high speed wiper switch is
turned
ON, the windshield wiper drive signal turns
ON. Also, the
wiper speed switching relay turn s ON
(HI),
and th e windshie l d wip e r opera t es a t the h i gh
spee
d.

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-18
WINDSHIELD WIPER LINKED WITH WASHER FUNCTION (INITIAL CONDITION: WITH
THE WINDSHIELD WIPER LINKED WITH WASHER FUNCTION)
AC309988AC
t
t
T T
ON
OFF
ON
OFF
ON
OFF ON
OFF
Windshield wiper
auto stop signal Windshield washer relay Windshield washer switch
Windshield wiper relay
Wiper switch in
off positionWiper switch in intermittent
operation position
t: 0.2 or 0.3 second
T: Intermittent wiper intermittent time
Wiper
switchOFF positionIntermittent operation positionLow-speed or
high-speed
operation
position
Washer
switch ON
time (t)0.3
second or
less0.3 to 0.5
second0.5
second or
more0.2
seconds
or less0.2 to 0.4
second0.4 to 0.6
second0.6
second or
more−
T0 second2 seconds3 seconds0 second1 second2 seconds3 seconds3 seconds
When th e windshie l d washer switch in the column
switch is turned
ON with the ignition switch in th e
ACC or ON positio
n, the ET ACS-ECU turn s ON the
windsh
i eld washe r rela y .
When the windshie l d washer switch is kept ON for
0.3 secon
d s, th e windshie l d wip e r drive signa l (the
wiper drive sign
al ou tput time varie s de pending on
the condit
i ons. For d e t a ils, refer t o the t ables) is
turned ON, and
the win d shield wiper is ope rated a t
high
spee d. Three seconds af ter turn ing OFF th e
windshie
l d wa sh er switch, th e win d sh ield wip e r tu rns
OFF
.
Even when the win d shield wa sher switch is turne d
ON while the windsh
i eld wiper is o perating in termit
-
tently, the intermittent action is ke pt af ter th e linked
operation is finished.
If the igniti on switch is se t to the ACC position while
t
h e wind shie ld wa sher swit ch i s be ing tu rn ed ON, t he
windshield washe
r rela y becomes ON, but th e wind
-
shield wipe r doe s not st art the lin ked operation.
When th
e windshie l d washer switch is t u rned OFF
and the
n ON a gain , the win d shield wiper make s the
linked o
peration.
NOTE: .
•Using a cust omisation fun c tion, the driver ca n
en
ab le or dis abl e th e wi nd shi e ld wi per lin ked wit h
washer functio
n . For more information about the
customisatio
n featu r e, refer to
P.54B-25.
•When the windsh i eld wiper linked with washe r
fun
c tio n is disabled by the customisa t ion feature ,
the
windshield wiper does not op erate in synch r o
-
nization with the win d shield wa sher . However ,
the
windshield wash er ca n be activated. It is use
-
ful to melt do wn the ices of th e frozen wind shield.

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-19
REAR WIPER AND WASHER
REAR WIPER CONTROL [THE INITIAL CONDITION: 8 SECONDS (WITHOUT SUCCES-
SIVE OPERATIONS)]
AC207474AB
t
ON
OFF
ON
OFF
ON
OFF T2
T3
T2
T3
T1 T4
T4
T1 T4
T4 T4
T3
T2 T2T2
T2: 7.4 seconds
Rear wiper drive signal Rear wiper switch
Inhibitor switch "R" position
T1: 3.0 seconds
t: 1.0 second
T3: 8.0 seconds
T4: 0.6 second
1. Whe n the rear wipe r switch on the colu mn switch
is turne d ON wit h the ignit i on switch at the ACC
or ON positio n, ET ACS-ECU turns ON the rear
wipe r drive signal for 3 se conds (ap p roximat e ly 2
ope ration s) an d perfo rms the in termittent action
at 8 - second intervals.
When th e se lect or lever is moved to R position dur-
ing the rear wipe r ope ratio n , t he inh i bitor swit ch R
position turn
s ON one seco nd af ter th at,
ET
ACS - ECU se nd s th e re ar wipe r d r ive sign al f o r
3 seco
nds (approximately 2 op eratio ns), a nd
ope
rates the intermittent action in 8 secon d s
in
terva l .
2.By t he sp ecial op eration of th e rear wiper switch
on the column switch (successive 2-time opera
-
tions), the rea r wiper op erates co ntinu ously
rega
rdless o f the set intermittent time .
NOTE: The rear wipe r inte rmit tent time can b e
a
d
just
ed o r ca ncelled fo r con t inu ous o peratio n by the
customise f unction (Refe r to
P.54B-25).