2006 MERCEDES-BENZ SLK-Class navigation

164 Navigation*
During route guidance
Route guidance to a stop-over destina-
tion is not active:
You can enter a stop-over destination;
or
Route guidance to a stop-over is al-
ready active:
You can change the stop-over destina-
tion or cancel the route guidance to it
by deleting the stop-over (
page 166).
Entering a stop-over destination
The soft key displays are shown
(
page 158).
Press the St-over soft key.
The full-screen map display appears.Selectable soft keys
 soft key
Provides access to a list of Mercedes-
Benz Centers in the area,
 soft key
Provides access to a list of gas stations
in the area,
 soft key
Provides access to a list
of parking ar-
eas and multi-story car parks in the area,
 soft key
Provides access to a list of restaurants
in the area,
 soft key
Provides access to a list of hospitals in
the area,
Other soft key
Provides access to the Destination en-
try menu (
page 137).

165 Navigation*
During route guidance
Press one of the soft keys, for example
the soft key.
One of several food categories can be
chosen (if available).
Use  or to select a category
from the list.
The
Page soft keys allow scrolling
through the list page by page.
Press .
If appropriate destinations are avail-
able, a list with restaurants in the area
appears.
Use  or to select a destination
from the list.
The
Page soft keys allow scrolling
through the list page by page.
Press the Details soft key if you want to
see details of a selected destination.
The details disappear again after
approx. 3 seconds, or when pressing
the
Details soft key again.
i
The arrows point in the direction of the
destination.
Distance information specifies the di-
rect distance to the destination.


166 Navigation*
During route guidance
Press  to confirm the selection of the
destination.
The system begins to calculate the
route to the selected stop-over destina-
tion.
Changing/deleting the stop-over desti-
nation
The soft key displays are shown
(
page 158).
.Press the St-over soft key.
The menu for deleting or changing the
stop-over destination appears.Use to select the
Delete active stopover entry.
Press .
This will delete the stop-over. The sys-
tem calculates the route to the final
destination;
or
i
A stop-over destination can be
changed or deleted only while the route
guidance to this stop-over is active (in-
dicated by .
If no route guidance to a stop-over des-
tination is active yet (
page 164).

167 Navigation*
During route guidance
Use to select the
Replace active stopover entry.
Press .
The stop-over is deleted, a new stop-
over destination can be entered
(
page 164).
The soft key displays are shown
(
page 158).
Press the Display soft key.
The Display menu appears.Selectable soft keysSymbols soft key
Provides access to setting the symbols
display (
page 168),
View soft key
Provides access to setting the map ori-
entation (
page 169),
GPS soft key
Provides access to the Position Display
menu (
page 170),
Auto soft key
Provides access to the Automatic Map
Switching menu (
page 171),
Zoom soft key
Provides access to the definition of the
scales for full-screen and split-screen
map display (
page 172).
Defining route guidance displays

168 Navigation*
During route guidance
You can select which POIs will appear as
symbols on the map.
In the Display menu (page 167)
press the
Symbols soft key.
The available options appear.
Use  or to select an option.
Press.
The selected option is activated. A solid
circle designates an activated op-
tion.
Standard option:
The symbols for the system default
setting are displayed on the map;
Personal option:
The symbols to be displayed can be
selected from a list (
page 169);
None option:
No symbols will be displayed on the
map.
Setting symbols display
i
The symbols are on display only if the
map scale is set at 0.05 mi (50 m),
0.1 mi (100 m), 0.2 mi (200 m), or
0.5 mi (500 m).
To set the map scale (
page 155).i
The Change soft key is only available if
the
Personal option is selected. Other-
wise, it will appear shaded out.

169 Navigation*
During route guidance
Setting personal symbol display
After activating the Personal option
(
page 168), press the Change soft key.
The list of available symbols appears.
Use  or to select a list entry.
Press to activate or deactivate a se-
lected symbol depending on its previ-
ous state.
Finally, press the Back soft key or wait
for the screen to change.
The setting is stored.
One of the following orientations can be
selected:
2D North up
Fixed map orientation, north is always
pointing up;
2D Heading up
Dynamic map orientation, driving direc-
tion is always pointing up.
In the Display menu (page 167),
press the
View soft key.
Both options appear.
i
Empty square = symbol deactivated
Solid square = symbol activated
Any number of symbols can be activat-
ed.
Setting map orientation
i
Empty circle = deactivated
Solid circle = activated

170 Navigation*
During route guidance
Changing map orientation
Use  or to select the desired
option.
Press.
The orientation changes.
Finally, press the Back soft key or wait
for the screen to change.If you activate GPS position display and
full-screen map display (
page 156), the
following data is displayed in the status
bar:
The current position as coordinates.
The number of satellites that can cur-
rently be received.
The current elevation (ALT = altitude)
above sea level.In the Display menu (page 167),
press the
GPS soft key.
Option
On or Off appears.
i
During route guidance, a symbol will
appear on the left-hand side of the bot-
tom status bar if map display is
switched ON.
North symbol :
Fixed map orientation, north is al-
ways pointing up;
Compass symbol :
Dynamic map orientation, driving
direction is always pointing up.
Switching GPS position display
ON/OFF

171 Navigation*
During route guidance
Use  or to select the desired
option.
Press .
Depending on the previous setting,
GPS position display will be switched
ON or OFF.
Finally, press the Back soft key or wait
for the screen to change.
If you have set the map view to full screen
(
page 156) and the automatic map tog-
gling function is activated, then the follow-
ing happens:
The system automatically switches to
the split-screen map display when a
driving maneuver is announced.
As soon as the driving maneuver is
completed, the system automatically
returns to full-screen map display.Switching automatic toggling ON/OFF
In the Display menu (page 167),
press the
Auto soft key.
Option
On or Off appears.
i
The solid circle shows the current
setting.
Automatic map toggling