2006 MERCEDES-BENZ SLK-Class Comand Manual

168 Navigation*
During route guidance
You can select which POIs will appear as
symbols on the map.
In the Display menu (page 167)
press the
Symbols soft key.
The available options appear.
Use  or to select an option.
Press.
The selected option is activated. A solid
circle designates an activated op-
tion.
Standard option:
The symbols for the system default
setting are displayed on the map;
Personal option:
The symbols to be displayed can be
selected from a list (
page 169);
None option:
No symbols will be displayed on the
map.
Setting symbols display
i
The symbols are on display only if the
map scale is set at 0.05 mi (50 m),
0.1 mi (100 m), 0.2 mi (200 m), or
0.5 mi (500 m).
To set the map scale (
page 155).i
The Change soft key is only available if
the
Personal option is selected. Other-
wise, it will appear shaded out.

169 Navigation*
During route guidance
Setting personal symbol display
After activating the Personal option
(
page 168), press the Change soft key.
The list of available symbols appears.
Use  or to select a list entry.
Press to activate or deactivate a se-
lected symbol depending on its previ-
ous state.
Finally, press the Back soft key or wait
for the screen to change.
The setting is stored.
One of the following orientations can be
selected:
2D North up
Fixed map orientation, north is always
pointing up;
2D Heading up
Dynamic map orientation, driving direc-
tion is always pointing up.
In the Display menu (page 167),
press the
View soft key.
Both options appear.
i
Empty square = symbol deactivated
Solid square = symbol activated
Any number of symbols can be activat-
ed.
Setting map orientation
i
Empty circle = deactivated
Solid circle = activated

170 Navigation*
During route guidance
Changing map orientation
Use  or to select the desired
option.
Press.
The orientation changes.
Finally, press the Back soft key or wait
for the screen to change.If you activate GPS position display and
full-screen map display (
page 156), the
following data is displayed in the status
bar:
The current position as coordinates.
The number of satellites that can cur-
rently be received.
The current elevation (ALT = altitude)
above sea level.In the Display menu (page 167),
press the
GPS soft key.
Option
On or Off appears.
i
During route guidance, a symbol will
appear on the left-hand side of the bot-
tom status bar if map display is
switched ON.
North symbol :
Fixed map orientation, north is al-
ways pointing up;
Compass symbol :
Dynamic map orientation, driving
direction is always pointing up.
Switching GPS position display
ON/OFF

171 Navigation*
During route guidance
Use  or to select the desired
option.
Press .
Depending on the previous setting,
GPS position display will be switched
ON or OFF.
Finally, press the Back soft key or wait
for the screen to change.
If you have set the map view to full screen
(
page 156) and the automatic map tog-
gling function is activated, then the follow-
ing happens:
The system automatically switches to
the split-screen map display when a
driving maneuver is announced.
As soon as the driving maneuver is
completed, the system automatically
returns to full-screen map display.Switching automatic toggling ON/OFF
In the Display menu (page 167),
press the
Auto soft key.
Option
On or Off appears.
i
The solid circle shows the current
setting.
Automatic map toggling


172 Navigation*
During route guidance
Use  or to select the desired
option.
Press .
Depending on the previous setting, au-
tomatic map toggling will be switched
ON or OFF.
Finally, press the Back soft key or wait
for the screen to change.
You can select whether the full-screen and
split-screen map scales are to be set to-
gether (default setting) or individually.
In the Display menu, press the
(
page 167) Zoom soft key.
The
Standard setting and Manual options
appear.
Standard setting option:
The scales for full-screen and split-
screen map display are always
identical. Changing the scale
(
page 155) on one map changes
the scale of the other.
Manual option:
The scales can be different. Chang-
ing the scale on one map has no ef-
fect on the current scale of the
other map.
i
The solid circle shows the current
setting.
Scales for full-screen and
split-screen map display
i
The solid circle shows the current
setting.

173 Navigation*
During route guidance
Use  or  to select the desired op-
tion.
Press .
Depending on the previous setting, the
Standard setting (identical scale) or
Manual (individual scale) option is acti-
vated.
Finally, press the Back soft key or wait
for the screen to change.

174 Navigation*
Last destinations and destination memory
The Last destinations memory automatical-
ly stores the last destination for which
route guidance had been started.
The current vehicle position and positions
selected via the map can also be stored as
destinations in this memory (
page 150).
Such destinations are marked with .
Altogether a maximum of 50 destinations
can be stored.
Open the Navigation main menu
(
page 127).
Use to select the
Last destinations menu item.
Press .
The list of last destinations and map
positions is displayed. The most re-
cently stored destination is shown at
the top of the list.Selecting an entry from the Last desti-
nations memoryOpen the Last destinations memory.
Useor to select an entry.
The
Page soft keys allow scrolling
through the list page by page.
Last destinations memory

175 Navigation*
Last destinations and destination memory
Selectable soft keys
Save soft key
Stores the selected entry in the Destina-
tion memory (
page 177),
Details soft key
Displays details on the selected entry (if
available),
Delete soft key
Allows the deletion the selected entry
(
page 175).
Starting route guidance to a destina-
tion from the Last destination memory
Select an entry (page 174).
Press .
The Start Route Guidance menu with
the full displayed destination appears.
Press if you want to start route
guidance (
page 152), otherwise
press the
Back soft key.Deleting an entry from the Last destina-
tions memory
Select an entry (page 174).
Press the Delete soft key.
You are prompted to confirm whether
or not the destination is to be deleted.
Use  to select the menu item Yes.
Press .
The destination is deleted.