Page 28 of 213
27 At a glance
Multifunction steering wheel
You can switch the multifunction display to
the respective operating mode if you wish
to operate the system using the buttons on
the multifunction steering wheel.
On the multifunction steering wheel,
pressè or ÿ repeatedly until
Radio, Single CD, MP3, CD changer*,
Satellite radio* or Telephone* display
appears in the multifunction display of
the instrument cluster.Radio operation
1Waveband and position in Preset menu
2Station frequency
Single CD operation
1Single CD operation
2Current trackMP3 operation
1MP3 operation
2Current track
CD changer* operation
1Current CD
2Current track
Selecting the multifunction display
Page 29 of 213
28 At a glance
Multifunction steering wheel
Satellite radio* operation
1SAT and position in Preset menu
2Channel nameTelephone* operation
If a telephone has been installed, either the
main display or a list appears.
Telephone main display:
1Telephone operation
2Telephone network informationIn the list screen, instead of the telephone
network information, either a phone book
entry or one of the last 10 outgoing calls
will be displayed.
In order to close the list display,
presst
.
This switches to the telephone main
display.
Page 30 of 213
29 At a glance
Menu system
Menu system
The menu system allows for easy opera-
tion of COMAND.
Each of the following main functions has a
main menu:
Audio
(Radio, Single CD, MP3, CD changer*
and AUX mode)
Satellite radio*
Telephone*
Navigation*
ServiceOpening main menus
Audio (page 40):
Press .
Satellite radio* (page 85):
Press .
Telephone* (page 104):
Press .
Navigation* (page 127):
Press .
Service (page 187):
Press .Menu display
A display can be composed of 3 sections.
Example: Radio main menu
1Soft key sections
2Main area
3Status bar
Page 31 of 213
30 At a glance
Menu system
The functions currently assigned to the
soft keys are displayed in the soft key sec-
tions 1.
Messages or settings are displayed in the
main area 2.
The settings can be changed by operating
controls accordingly.
The status bar 3 is divided into three ar-
eas.Left side:
The selected operating mode is given. In
this example: Radio
Center:
Indication of the selected operating mode.
In this example:
FM = selected waveband
1 = selected station is stored on
preset 1
Right side:
General status information is displayed, re-
gardless of the selected operating mode. In this example (
page 29):
ROAMING = telephone* is logged into a
mobile communications network out-
side your home network.
= telephone* signal strength
Menu functions and submenus
Using the soft keys you can switch func-
tions ON or OFF or open submenus.
i
A maximum of five soft keys may be
displayed on each side of the main area
2.
Page 33 of 213
32 At a glance
Quick reference COMAND
Switching ON
Turn the key in the steering lock to po-
sition 1 or 2,
or
Press.
COMAND switches on the last active
system and displays the corresponding
menu.Switching OFF
Turn the key in the steering lock to po-
sition 0 and remove it,
or
Press.
Different volume settings are possible for
Navigation* or Telephone*.
i
The system can be operated as follows:
from COMAND itself, or
from the multifunction steering
wheel
This operating manual describes oper-
ation from COMAND and from the mul-
tifunction steering wheel.
Unless otherwise specified, the de-
scriptions and the displays illustrated
relate to the COMAND control unit.
Switching COMAND ON/OFF
i
Without the key in position 1 or 2 of the
steering lock, the system automatically
switches OFF again after approx. 30
minutes of inactivity.
i
If a telephone call is in progress (hands-
free) you cannot switch the COMAND
OFF, is disabled.
Volume
Page 88 of 213
87 Satellite radio*
Satellite radio operation
Satellite radio operation
Press.
Different menus appear depending on
Satellite radio service activation.
Prior to activation of the Satellite
radio service,
After Satellite radio service was ac-
tivated.
Prior to activation of the Satellite radio
service
The telephone number of the Sirius Service
Center and the twelve-digit electronic seri-
al number (ESN) of the particular receiver
are displayed.
This information is required to call the Siri-
us Service Center for an activation re-
quest.After activation of the Satellite radio
service
The SAT main menu appears.
The radio station selected last is audible,
provided it can be received.
Switching to Satellite radio modei
Credit card information is also required
for your application.
The activation process takes approxi-
mately 5 to 10 minutes after calling the
Sirius Service Center.
i
The system will tune to a default sta-
tion if no station had been selected
previously.
Page 89 of 213
88 Satellite radio*
Satellite radio operation
Station information is displayed on the
main area and in the center of the status
bar.
Main area, in this example:
ROCK = selected category (page 90)
Vault = name of the selected stationStatus bar, in this example:
SAT (on the left) = the selected mode
SAT5 = location in the program
memory, if the current channel is pre-
stored
Ch16 = number of the current channel
Selectable soft keys
Presets
shows channels pre-stored in the pro-
gram memory (up to 10 channels). You
can store stations (
page 93) and re-
quest stored stations (
page 89).
Info
shows additional text information relat-
ed to the current channel.
Scan
is used to start and stop the scan
search (
page 92).
Service
displays a screen showing the tele-
phone number of the Sirius Service
Center and electronic serial number
(ESN) of the receiver in your vehicle.
SAT main menu
Page 95 of 213
94 Satellite radio*
Satellite radio operation
Press the Service soft key.
The telephone number of the Sirius
Service Center and the twelve-digit
electronic serial number (ESN) of your
vehicle's receiver appear.It may be necessary to call the Sirius Ser-
vice Center if, for example:
you want to cancel the subscription or
to re-subscribe at a later date
you forget to pay the bill
you sell the car to another person
Calling the Sirius Service Center