2006 MERCEDES-BENZ CL-Class Comand Manual

183
Service
Address book
Ending the data input
When all data are entered, press the
Back soft key in the entry edit menu.
The data are saved.
Importing a mobile phone internal
memory entry
Mobile phone internal memory entries only
contain a name and a telephone number.
You can import mobile phone internal
memory entries into the address book and
enter additional data.
Activate the detail view of the desired
mobile phone internal memory entry
(
page 182).
Press the Import soft key.
Press g or G to select between
Create New Entry and Add To.
Press E. Option
Create New Entry:
The system automatically takes over name
and number of the mobile phone internal
memory entry. You only need to define the
name and surname under which the
system is to store the phone number.
Press E or press the OK soft key.
If the current phone number’s category
is not
Cell, Work or Home a selection
menu will appear.
Select a number type under which
the system is to store the phone
number.
Press G or g to select an entry.
Press E.
The system imports the data. The
message
Entry Imported to
Address Book
will appear.
220_Service_US_A_2006.fm Seite 183 Mittwoch, 22. Dezember 2004 1:11 13

184 Service
Address book
Option Add To:
You can now select an address book entry
to which the system is to add the phone
number of the mobile phone internal
memory entry.
Select an address book entry
(
page 177).
Press E.
If the current phone number’s category
is not
Cell, Work or Home a selection
menu will appear.
Select a number type under which
the system is to store the phone
number.
Press G or g to select an entry.
Press E. If no entry exists for the number type,
the system will import the data.
If an entry exists, the system will ask
whether you wish to overwrite the
entry.
Overwrite the entry
Press
E.
The system imports the data. If you do not wish to overwrite the entry
Press
h to select No.
or
Press the Back soft key.
You can now again select a number
type.
220_Service_US_A_2006.fm Seite 184 Mittwoch, 22. Dezember 2004 1:11 13

185
Service
Address book
In the Address book menu
(
page 176), press the New soft key.
The entry creation menu will appear.
A list with data fields is displayed
(Surname, Name, Cell, URL). You can use the softkey to use additional
functions for the address book entry.GenInfo, Co. (Company), PrivInfo
and
Keypad soft key:
You can create a new address book
entry.
Note soft key:
You can add a note (
page 180).
New or Del. soft keys:
You can add or delete a spoken name
to or from the address book
(
page 180).
Play soft key:
Plays back the spoken name
(
page 181).
Export soft key:
Exports parts of the address book entry
to the mobile phone internal memory
(
page 181).
Press g or G to select a data field
(e.g.
Name).
You can enter data in a field using the
12-keys keyboard ( 1 - # ) or the
selection menu.
Input via selection menu
Press the Keypad soft key.
The selection menu appears.
Enter the data using the selection
menu (
page 193).
After you have entered the data, the
entry creation menu is displayed again.
You can select the next data field and
enter data.
New address book entry
220_Service_US_A_2006.fm Seite 185 Mittwoch, 22. Dezember 2004 1:11 13

186 Service
Address book
Input via 12-button keypad
Press 1 - # to enter the data
(
page 195).
Ending the data input
When all data are entered, press the
Back soft key in the entry creation
menu.
The data are saved to the address
book.
In the Address book menu, select the
entry to be deleted (
page 177).
Press the Delete soft key.
An inquiry will appear.
Option
Yes:
Press E.
The entry is deleted. Option
No:
Press
h to select No.
or
Press the Back soft key.
The entry is not deleted.
Deleting an address book entry
i
If you delete a mobile phone internal
memory entry in the address book, the
entry is automatically also deleted from
the mobile phone internal memory.
220_Service_US_A_2006.fm Seite 186 Mittwoch, 22. Dezember 2004 1:11 13

187
Service
Address book
If the address book entry offers
appropriate data, it may be used in other
system modes such as telephone and
navigation.
Press
H, h , g or G to select the
desired entry (
page 177).
Press E.
or
In the detail view (page 178), press
E longer than 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
The selection menu appears.
Selections appearing will depend on
the data available for a given entry. Using an address book entry to dial a
number
You can have a phone number dialed which
is saved in the address book.
Press
g or G to select a phone
number.
Press E.
Dialing will begin. You can then make
your telephone call.
You will find more information in
chapter “Telephone”. Starting route guidance to an address
book entry
You can transfer an address to the
navigation system and start route
guidance.
f
Using an address book entry
in other system modes
i
This function is only available for
addresses which are saved in the
navigation system’s destination
memory (
page 155). The COMAND
saves addresses not only in the
destination memory, but at the same
time in the address book.
220_Service_US_A_2006.fm Seite 187 Mittwoch, 22. Dezember 2004 1:11 13

188 Service
Address book
Press g or G to select an entry
which allows route guidance
(navigation).
Press E.
The system changes to the navigation
system and calculates the route.
You will find more information in
chapter “Navigation”.
i
The route is calculat ed with or without
traffic routes selected for the
destination (
page 120).
220_Service_US_A_2006.fm Seite 188 Mittwoch, 22. Dezember 2004 1:11 13

189
Service
Tele Aid*

Tele Aid*
Tele Aid* incorporates the following
functions:
Emergency call
Roadside Assistance
Information call
Remote Door Unlock
Stolen Vehicle Recovery The speaker volume of a Tele Aid call can
be adjusted using the volume control on
the COMAND (
page 98) or the
æ and
ç buttons on the multifunction steering
wheel.
During a Tele Aid call, all audio sources are
muted. The telephone is turned off and no
SMS messages can be received or
transmitted.
During a Tele Aid call, the used Network
Type (“A” for analog network or “D” for
digital network) and the signal strength are
displayed on the lower right corner of the
COMAND display. An emergency call is initiated
automatically in the event emergency
tensioning devices (ETDs) or air bags are
deployed. An emergency call can also be
initiated manually by pressing the
I
button. Refer to your vehicle Operator’s
Manual for additional information.
Once the emergency call is in progress, the
indicator lamp in the I button will begin
to flash. The message
Connecting Call
appears on the display and all audio
resources are muted.
When the connection is established, the
message
Call Connected appears on
the display. A voice connection between
the Response Center and the vehicle
occupants is establis hed soon after the
emergency call has been initiated.
i
To use Tele Aid*, the Tele Aid service
must be subscribed to and properly
activated. If you have any questions
regarding activation, please call
the Response Center at 1-800-756-
9018 (in the USA) or 1-888-923-8367
(in Canada).
The Tele Aid system is operational
provided the Tele Aid service was sub-
scribed to and properly activated.
Additionally, the vehicle’s battery must
be charged, properly connected, not
damaged and cellular service and GPS
coverage must be available.
GeneralEmergency call
220_Service_US_A_2006.fm Seite 189 Mittwoch, 22. Dezember 2004 1:11 13

190 Service
Tele Aid*
If the Tele Aid system could not establish a
voice connection to the Response Center
(e.g. the relevant cellular phone network is
not available) the message
Call failed
appears.
Should this occur, assistance must be
summoned by other means.
Terminating the connection
The connection can only be terminated by
the Response Center who has answered
the call. Roadside Asssistance will assist if
technical problems with your vehicle are
experienced.
Roadside Assistance can only be
requested manually by pressing the
•
button. Refer to your vehicle Operator’s
Manual for additional information.
After initiating Roadside Assistance, the
message
Connecting Call will appear
on the display and the connection to a
Mercedes-Benz Roadside Assistance
Center is established. All audio sources are
muted.
If the connection is established, the
message
Call Connected will appear
and a voice connection between the
Roadside Assistance Center and the
vehicle occupants is established soon
after.
i
During an active emergency call,
switching to another application is not
possible.
WarningG
If you feel at any way in jeopardy when in the
vehicle (e.g. smoke or fire in the vehicle, ve-
hicle in a dangerous road location), please
do not wait for voice contact after you have
pressed the button. Ca refully leave the ve-
hicle and move to a safe location. The
Response Center will automatically contact
local emergency officials with the vehicle's
approximate location if they receive an auto-
matic SOS signal and cannot make voice
contact with the vehicle occupants.
Roadside Assistance
220_Service_US_A_2006.fm Seite 190 Mittwoch, 22. Dezember 2004 1:11 13