2006 LEXUS LX470 warning light

STARTING AND DRIVING
305
Replacing tires and wheels
When replacing the tires and wheels, be sure to install tire
pressure warning valves and transmitters. ID codes on the tire
pressure warning valves and transmitters are registered on the
tire pressure warning ECU. When replacing a tire pressure
warning valve and transmitter, it is necessar y to register the ID
code of tire pressure warning valve and transmitter. Have the
ID code registered by your Lexus dealer.
If the ID code is not registered, the system will not work
properly. After about 1 hour, the tire pressure warning light
blinks to indicate a system malfunction.
NOTICE
When the tires or tire pressure warning valves and
transmitters must be replaced, have them replaced by
your Lexus dealer. The tire pressure warning valves
and transmitters will be affected by the installation or
removal of tires.
Tire pressure warning reset switch
31x612
When initializing the system, the present tire inflation pressure
is stored as standard. The tire pressure warning system
determines decreased air pressure by comparing the present
and the standard tire inflation pressures. When you change
the set tire inflation pressure, it is necessary to initialize the tire
pressure warning system.
 When rotating the tires on vehicles differing with front and
rear tire inflation pressures.
 When changing the tire inflation pressure by changing
traveling speed or load weight, etc.
 When changing the tire size.

STARTING AND DRIVING
306To initialize the system, perform the following:
1. Park the vehicle in a safe place and turn the ignition switch
to the “OFF” position.
2. Adjust the pressure of all the installed tires to the specified
cold tire inflation pressure level. (See “Tire and wheels” on
page 420.)
3. Turn the ignition switch to the “ON” position.
4. Push and hold the tire pressure warning reset switch until
the tire pressure warning light blinks slowly three times.
5. Wait for a few minutes with the ignition switch “ON”, and
then turn the ignition switch to the “OFF” position.
If you push the tire pressure reset switch while the vehicle is
moving, initialization is not performed.
If you push the tire pressure reset switch accidentally and
initialization is performed, adjust the tire inflation pressure to
the specified level and initialize the system again.
31x609
If the tire pressure warning light does not blink slowly three
times when you push and hold the reset switch, initialization
has failed and the tire pressure warning system may not work
properly. In this case, initialize the system again. If
initialization
cannot be performed, have the system checked at
your Lexus dealer.
CAUTION
Do not push the reset switch without first adjusting the
tire inflation pressure to the specified level. Otherwise,
the tire pressure warning light may not come on even if
the tire inflation pressure is low, or it may come on when
the tire inflation pressure is actually normal.

STARTING AND DRIVING
307
Tire pressure warning select switch
31x614a
 1Main position 22nd position
2 sets of tire pressure warning valve and transmitter ID codes
can be registered.
Once a second set of tires is registered at “2nd”, you can switch
between tire set settings simply by pressing the tire pressure
warning select switch.
There are 2 settings
“MAIN” position: The ID code of the tire pressure warning valve
and transmitter on the tires originally installed on the vehicle is
registered.
“2nd” position: The code is not registered. When you replace
a new set of tires, purchase tire pressure warning valves and
transmitters from your Lexus dealer and have the new ID code
registered by your Lexus dealer. If the tire pressure select switch is set to the wrong tire setting,
the system will not work properly. After about 1 hour, the tire
pressure
warning light blinks to indicate a system malfunction.

IN CASE OF AN EMERGENCY
360
INFORMATION
Operating the Lexus Link System during the use of
Bluetooth phone will terminate a Bluetooth phone call.
40x604a
 1Lexus Link System indicator light (green)
2Lexus Link System warning light (red)
When the ignition is turned to the “ON” position, the warning
light comes on for 2 seconds, then goes off. As soon as it goes
out, the indicator light comes on. This means the Lexus Link
System is operating properly. The indicator light should remain
on to inform you that you have an active subscription. If your
Lexus Link subscription has expired, the indicator light should
go off. To activate your Lexus Link System, press the
“SERVICES” button. To learn more about your subscription
status or how to renew or extend your subscription, please
push the “SERVICES” button to speak to a Lexus Link Advisor,
or you may dial toll free 1−800−25 Lexus (Toll −Free)
(1−800−255−3987) and select the option for Lexus Link. If
problems are detected in the Lexus Link System, the warning
light comes on or you will hear “A system error has been
detected. Please contact your Lexus dealer.” In either case,
take your vehicle to your Lexus dealer.

IN CASE OF AN EMERGENCY
363
Other Services
40x606a
When you push the “SERVICES” button, you will hear
“Connecting to Lexus Link”. Your location and system ID
are automatically transmitted to the advisors that provide
services. The services provided will depend on the level
of service package selected.
For details about various services that are available, contact
your Lexus dealer, or push the “SERVICES” button and speak
to the Lexus Link Advisor, or you may dial toll free 1 −800− 25
Lexus (Toll −Free) (1− 800−255−3987) and select the option for
Lexus Link.
To cancel a services call, push the phone button. “Lexus Link
request ended” will be announced. If problems are detected in the Lexus Link System, the warning
light comes on or you will hear “A system error has been
detected. Please contact your Lexus dealer.” In either case,
take your vehicle to your Lexus dealer.
Lexus Link services may not be available in the following
cases.

The components or wire harnesses for the system are
damaged.
 The Lexus Link Call Center is not operational.
 The antenna does not work properly due to vehicle damage.
 In a weak or non− cellular coverage area.
 Your vehicle is in area where the GPS signal is weak or
cannot be received.
 The Lexus Link subscription has expired.
NOTICE
Upon subscription expiration, all Lexus Link services
(i.e. automatic notification, emergency call functions,
service call functions, remote door locking/unlocking
function, remote horn and lights function) are
deactivated.

IN CASE OF AN EMERGENCY
366To playback: Push the PTT or phone button and “Lexus Link
ready”
will be announced. Then say “Advisor playback” to play
the recorded conversation. To stop the playback, push the
phone button. To restart the playback, say “Advisor playback”
and then “Resume” for resuming or “Play” for starting from the
beginning.
To change the volume: Push the volume button on either side
to adjust the volume. When you change the volume, one beep
sounds.
Lexus Link System indicator and warning
lights
40x604a
 1 Lexus Link System indicator light (green)
2Lexus Link System warning light (red)
When the indicator light remains on, you have an active
subscription. You can obtain any of the Lexus Link services
available in your package.
When the indicator light starts flashing, a call to the Lexus
Link Call Center is being connected or in progress.

IN CASE OF AN EMERGENCY
367
When the warning light remains on, there is any problem
with the Lexus Link system. Take your vehicle to your Lexus
dealer as soon as possible.
When the indicator and warning lights go off,
your
subscription has expired.
Voice Recognition
You can start voice recognition by pressing the phone or
PTT button. Although either button works the same way,
use the PTT button during a call.
Pressing the phone button during a call will terminate the call.
Some English audible voice prompts can be changed to
Spanish. For details, see “Audible voice prompts” on page
381.
ADVISOR PLAYBACK
Your Lexus Link system is equipped with an advisor playback
recorder to store information given to you during a call with a
Lexus Link Advisor. You can play back the stored audio
information at a later time, when you are no longer connected
to Lexus Link.
To record a conversation only during a call with Lexus
Link Call Center:
1. Press the “SERVICES” button.
You will hear beeps and recording starts. Note that start of
recording may be delayed up to five seconds to clear existing
audio information. Recording starts immediately after the last
beep.
2. Press the “SERVICES” button again.
Recording ends.

IN CASE OF AN EMERGENCY
382Voice phrase (English) Explanation
Voice phrase (Spanish)
Unable to contact Lexus LinkNo pude conectarme con Lexus LinkA call is attempted, but failed.
The Lexus Links system is not active.Su servicio Lexus Link no ha sido
activado.The emergency button is pushed without
an active subscription.
A system error has been detected.
Please contact your Lexus dealer.Un error en el sistema ha sido
detectado. Por favor contacte su
concesionario Lexus.As a substitute of the faulty warning light