2006 LEXUS LS430 buttons

C
A
B
Rear Seat position
memory buttons
P.29 Power outlet
P.214
Power window switches
P.45
Ashtray P.211
Cigarette lighter

P.213
Knee airbags P.60
Pictorial indexInterior
Rear console box
P.202
Driving position
memory buttons
P.25
SRS air bags
P.60
Front seats P.22
Cup holders P.204
SRS side airbags P.60

A
BC
Moon roof switches P.48
SRS curtain shield airbags
P.60
Door lock switch P.15
Power window switches P.45
: If equipped
Garage door opener buttons P.232
Personal lights P.198
Sun visors P.208
Auto anti-glare mirror P.42
Coat hooks P.223
Personal lights P.198
Vanity mirrors P.209

9
1-2. Opening, closing and locking the doors and trunk
1
Before driving
■Changing the doors to be unlocked
You can change the settings for the door unl
ocking in the following way.
Turn off the ignition.
Push the LOCK and TRUNK buttons at
the same and hold for 5 seconds.
Setting will change every time you push an d hold the bu
ttons at the same for 5 sec-
onds.
When the setting is done, beeps sound outside the vehicle in accordance with the
setting.
■Battery power saving
To prevent the batteries from being discharged, the smart access system is automati -
cally deactivated in the following conditions:
• If there is no smart door locking operation for more than 14 days.
• If the key is left within 3 ft. (1 m) outside of the vehicle for more than 10 minutes.
To reactivate the smart access system properly, perform any of the following:
• Press the lock button on the outside do o
r handle while carrying the smart key.
• Perform a wireless remote control operation.
• lnsert and turn the mechanical key in the keyhole of the door.
GraphicSelected door(s)Outside beep
Unlock all doors Three times
Unlock front and rear doors of the
side selected by gripping door handleTw i c e
Unlock door(s) selected by gripping
door handle(s).once

16
1-2. Opening, closing and locking the doors and trunk
Locking the front doors from the outside without a key
Move the lock lever to the lock position.
Close the door.
Rear door child-protector lock
The door cannot be opened
from inside the vehicle, when
the locks ar

e set.
These locks can be set to prevent
children from opening a rear
door. Push up on each rear door
switch to lock both rear doors.
■Inside lock button
Locks the door
Unlocks the door
The front doors can be opened by
pulling the inside handle even if the
lock buttons are in the lock posi -
tion.
1
2
1

26
1-3. Adjustable components
Selecting a memory setting using a smart access key or wireless remote
control key
Memorized driving positions ( P.25) can be recalled when you unlock
the driver’s door.
■ R
egistering the key
Set the driving positions into the memor
y system using the “1”, “2”
or “3” buttons ( P.25 ).
Close the driver’s door, turn the ig nition switch to the in OFF posi-
tion and remove the key.
Push the “1”, “2” or “3” button and the “LOCK” or “UNLOCK”
button at the same time about one second until you hear a beep.
■ Recalling the memorized position
The driving position will be automati cally adjusted to the position
recorded for that button when:
• The transmission selector lever is in the “P
” position.
• The ignition switch is in the “
ON” position.
• Pushing button “1”, “2” or “3”.

176
3-2. Using the audio system
Operating the radio
Setting radio station memory presets
Select the station to store into the memory.
Press and hold a button from to until a beep is heard to
set the station to that button.
Preset stations
Tr a f f i c 
information Adjusting the 
frequency
AM·SAT/FM 
mode buttons Displays RDS

programs
Po w e r Vo l u m e
Scans for 
available 
stations Displays radio text messages

218
3-5. Other interior features
Seat heaters
■Operating conditions
The ignition switch must be in the ON position.
Front
Press and release the knob to
use
Push the knob to pop out
ON/OFF
To turn on: turn the knob clock -
wise to the desired position, the
light abo
ve the knob indicates
that the seat heater is on.
To turn off: turn the knob all the
w
ay counter-clockwise. The
light will turn off when the seat
heater is off.
To adjust seat temperature: the
further you turn the knob clock -
wise, the warmer the seat tem -
perature becomes.
Push the knob into the recessed position when not in use
Rear
To turn on the seat heaters,
press the button for each seat.
The light on the buttons indicate
that the seat heater is on. To turn
off press the button again.
Driver’s seat Passenger’s seat1
2
3
Right seat
Left seat1

232
3-5. Other interior features
Garage door opener
The garage door opener (HomeLink Universal Transceiver) is manufactured
under license from HomeLink.
Programming the HomeLink (for U.S.A. owners)
The HomeLink
 compatible transceiver in your vehicle has 3 buttons
which can be programmed to operate 3 different devices. Refer to the
programming method below appropriate for the device.
Buttons
Indicator light
■ P
rogramming the HomeLink
Point the remote control for the device 1 to 3 in. (25 to 75 mm)
from the HomeLink
 control buttons.
Keep the indicator light on the HomeLink in view while programming.
The garage door opener can be programmed to operate garage doors, gates,
entry doors, door locks, home lighting systems, security systems, and other
devices.
1
2