2006 Lexus GS430 stop start

GAUGES, METERS AND SERVICE REMINDER INDICATORS
87
Trunk Open Warning
G13007
When any door, hood or trunk is open with the engine
switch in “IGON” mode, a message appears to let you
know which door, the hood or trunk is open. If you
continue driving in this condition, the master warning
light flashes and a warning tone sounds when the vehicle
speed exceeds 5 km/h (3 mph).
If any of the above warning messages appears, stop your
vehicle and close the door, hood or trunk securely.
 Moon Roof Warning
G13013
If the driver’s door is opened with the engine switch
turned off and the moon roof opened, the master warning
light flashes, a warning tone sounds and the above
message appears.
When you leave your vehicle, be sure to close the moon roof.
Parking Brake Release Warning
G13009
If you start driving with the parking brake applied, the
master warning light flashes, a warning tone sounds and
the above message appears when the vehicle speed
exceeds 5 km/h (3 mph).
If the above warning message appears, stop your vehicle and
release the parking brake.
 Headlight Leveling System Failure Warning
G13010
If there is a problem in the automatic headlight leveling
system, the master warning light comes on, a warning
tone sounds and the above message appears.
If the above warning message appears, have your vehicle
checked by your Lexus dealer as soon as possible.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
92
Tire Pressure Warning
G13025
When the low tire inflation pressure is detected while
driving, the tire pressure warning light and master
warning light come on, and the above message appears.
Adjusting the tire inflation pressure will turn off the warning
message. If the message remains on, have your vehicle
checked by your Lexus dealer.
G13024
This message indicates the tire pressure warning system is
initialized. After replacing the tires or wheels, adjust all 4 tires
to specified tire inflation pressure and initialize the tire pressure
warning system. To initialize the system, start the engine and
push the tire pressure warning reset switch for longer than 3
seconds with the vehicle stopped. The above message
appears.
G13026
If there is a problem in the tire pressure warning system,
the tire pressure warning light blinks and master warning
light comes on, and the above message appears.
The tire pressure warning light system is not working properly.
In this case, it is probable that a tire pressure warning valve and
transmitter is malfunctioning or the system is experiencing
signal interference. In the case of signal interference, the
warning message will turn off when the interference ends. If
the tire pressure warning light blinks and master warning light
comes on, and the above message appears frequently, have
your vehicle checked by your Lexus dealer.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
93
Electronic Key System Warning
G13014
In the following cases, the master warning light flashes, a
warning tone sounds and the above message appears.
 An electronic key is not detected in the vehicle when you
push the engine switch. In this case, the above message
appears for 8 seconds.
 An electronic key is not detected in the vehicle because
someone has taken an electronic key outside of the vehicle
without turning the engine switch off. At this time, the
electronic key sounds an alarm. The above message turns
off if you turn the engine switch off or the entry function
detects an electronic key in the vehicle.
In addition to either of the above conditions, if you get out from
the vehicle, having an electronic key when the engine switch
is selected in “IG −ON” mode and the selector lever is in a
position other than “P”, “SHIFT TO P RANGE” and “KEY IS
NOT DETECTED” appear alternately.
G13015
If you get out from the vehicle, having an electronic key
when the engine switch is selected in “IGON” mode and
the selector lever is in a position other than “P”, the
master warning light flashes, a beep sounds inside the
vehicle and the above message appears. When you shift
the selector lever to the “P” position or start driving, the
beeping stops sounding, the above message turns off.
In addition to the above condition, if the entry function does not
detect an electronic key in the vehicle, “SHIFT TO P RANGE”
and “KEY IS NOT DETECTED” appear alternately.
G13016
If the entry function determines that the battery voltage is
low (2V to 3V) when the engine switch is turned off more
than 20 minutes after turned on, the master warning light
flashes, a warning tone sounds and the above message
appears.
If the above message appears, the battery needs to be
replaced. Although you can replace the battery referring to
“Replacing the battery ” on page 34 , we recommend you have
it replaced by your Lexus dealer as it is easy to be scratched.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
96In the above conditions, press the control lever upward in the
“+ RES” direction and release it. The dynamic radar cruise
control will be restored, however, even after the weather
clears, if the setting operation cannot be performed or if the
warning message still appears, the system might have
malfunctioned. Although it is no problem to continue driving,
contact your Lexus dealer.
G13075
If the system malfunction is detected when dynamic radar
cruise control is in the “RADAR READY” mode or
operating, the master warning light comes on and the
“CRUISE” indicator light flashes. At this time a warning
tone sounds and the above message appears.
If this message appears, stop your vehicle in
a safe place, turn
the engine switch off, and then restart it to reset the system.
If the setting still cannot be made or the same message
appears again, the system might have malfunctioned.
Although it is no problem to continue driving, contact your
Lexus dealer.
NOTICE
While you are cruising with the dynamic radar cruise
control on, if the master warning light comes on, the
“CRUISE” indicator light flashes, “CHECK CRUISE
SYSTEM” appears on the multiinformation display and
the warning tone sounds, turn the engine switch off and
then on again. If the function is cancelled again after
setting or if settings cannot be made, the dynamic radar
cruise control system may be malfunctioning.
Although it is no problem to continue driving, have your
vehicle checked by your Lexus dealer.

OCCUPANT RESTRAINT SYSTEMS
203
Conditions for memorized position activation

Engine switch in “IG−ON” mode and selector lever in ”P”
position, with the vehicle stopped.
 Engine switch in “OFF” mode and within 30 seconds of
opening driver’s door.
The memorized position can be activated, except for the tilt
and telescopic steering.
If any driving position memory switch is pushed while one of
the memorized driving position profiles is being activated, the
operation will stop.
To activate the system, push the desired button (“1”, “2” or \
“3”)
again.
The driving position memory control system cannot be
operated while the vehicle is moving.
If the vehicle’s battery is disconnected, the computer’s
memory will be erased and the memorized positions will have
to be set again.
CAUTION
 Do not start the vehicle while the adjustments are
being made.
 Take care not to select the wrong button, or the seat
could strike the rear passenger or hit your body
against the steering wheel. If this happens, you can
stop the movement by pressing another driving
position memory switch.
MEMORY RECALL FUNCTION
You can recall the memorized position using the entry
function or wireless remote control.
If you unlock the door using the entry function or wireless
remote control, the memorized seat position is recalled when
the driver’s door is opened. The memorized steering wheel
position will be recalled when you push the engine switch.
This function can be used after setting by the following
procedure.
Setting the driving position onto the electronic key
The driver’s door must be closed with the engine switch turned
off.
1. Push and hold the previously memorized driving position
button “1”, “2” or “3”.
2. While depressing the button above, push and hold the
“LOCK” or “UNLOCK” button on the electronic key until a beep
sounds.
If you wish to set other driv ing position, repeat the above
procedure. The previous setting will be erased and the new
position will be set.
Resetting the driving position on the electronic key
The driver’s door must be closed with the engine switch turned
off.
1. Push and hold the “SET” button.
2. Push and hold the “LOCK” or “UNLOCK” button on the
electronic key until two beeps sound.

OCCUPANT RESTRAINT SYSTEMS
205
Conditions for memorized position activation

Engine switch in “IG−ON” mode and selector lever in ”P”
position, with the vehicle stopped.
 Engine switch in “OFF” mode and within 30 seconds of
opening front passenger’s door.
If any seat position memory switch is pushed while one of the
memorized seat position profiles is being activated, the
operation will stop.
To activate the system, push the desired button (“1”, “2” or \
“3”)
again.
The seat position memory control system cannot be operated
while the vehicle is moving.
If the vehicle’s battery is disconnected, the computer’s
memory will be erased and the memorized positions will have
to be set again.
CAUTION
 Do not start the vehicle while the adjustments are
being made.
 Take care not to select the wrong button, or the seat
could strike the rear passenger . If this happens, you
can stop the movement by pressing another driving
position memory switch.

TOUCH SCREEN
223
G18003
Consumption
The consumption is calculated and displayed based on
the driving distance and the fuel consumption for 2
seconds with engine running.
The value is updated every 0.5 seconds.
If you are driving at low speeds just before stopping, the
accurate figure may not be shown.
After Refueling
The consumption after refueling is calculated and
displayed based on the total driving distance and the total
fuel consumption after refueling.
The value is updated every 10 seconds.
When refueling, be sure to stop your vehicle and turn the
engine switch off. Cruising Range
How far you can drive with the remaining fuel is
displayed.
Even though the display indicates sufficient miles to run, if the
fuel level on the fuel gauge approaches “E” or the low fuel level
warning light comes on, fill the fuel tank as soon as possible.
INFORMATION
 When you first start driving your new vehicle, the
correct cruising range may not be shown. One or
more refills of 10 gallons or more may be required for
the system to set its calibration.
 The cruising range displayed is calculated based on
past fuel consumption and may vary according to
your driving style and road condition.

TOUCH SCREEN
224Average Speed
The Average Speed is displayed. The average vehicle
speed is calculated and displayed based on the total
driving
distance and the total driving time after the engine
is started.
The displayed value is updated every 10 seconds.
To calculate from the beginning, touch the “Reset” switch.
Distance
The distance after engine starting is displayed.
When refueling, be sure to stop your vehicle and turn the
engine switch off.
Handsfree system
Handsfree system allows you to make or receive a call
without taking your hands off the steering wheel by
connecting your cellular phone.
This system supports the Bluetooth. Bluetooth is a wireless
data system by which you can call without your cellular phone
connecting with a cable or placing on a cradle.
If your cellular phone does not support the Bluetooth, this
system can not function.
CAUTION
While you are driving, do not use a cellular phone or
connect the Bluetooth phone.
NOTICE
Do not leave your cellular phone in the vehicle. The
temperature indoor may be high and damage the phone.