1
FEATURES OF YOUR HYUNDAI
113ANTENNA
NOTE: Look at a tape before you insert it. If the tape is loose, tighten it by turning one of the hubs with a pencil or your finger.If the label is peeling off, do not put it in the drive mechanism. Do not leave tapes sitting wherethey are exposed to hot, warm, or high humidity, such as on top of the dashboard or in the player.If a tape is exposed to excessively hot or cold, let it reach a moderate temperature before putting it in theplayer. B870A01A-AAT Fixed Rod Antenna (If Installed) Your car uses a fixed rod antenna to receive both AM and FM broadcast signals. This antenna is a removable type. Toremove the antenna, turn the antenna counterclockwise. To install the an- tenna, turn the antenna clockwise.
CAUTION:
o Be sure to remove the antenna before washing the car in an auto-matic car wash or the antenna may be damaged.
! B870C01A-GAT Manual Antenna (If Installed) Your car uses a manual stainless steel antenna to receive both AM and FM broadcast signals. Pull up the antenna using your fingers, as shown in thedrawing. NOTE: Before entering an automatic car wash or a place with a low heightclearance, be sure that the antenna is fully retracted.
B860A03L
B870A01A
o When reinstalling your antenna, it
is important that it is fully tight- ened to ensure proper reception.
HLC2122