2006 GREAT WALL SO COOL relay

BE-42Body Electric System
Wiping and Washing System
Electric circuit diagram of wiping and washing system (continued)
SL SK
fuse
ignition switch
ACCONST
N21 3
4
56
1
27
2P
12 3 4 5
67
MIST
OFF
INT
LO
HI
washing
16
5
4
432
51
ignition switchcombined switch
rain-brusher intermissive relay brusher motorwasher motor
1
2 12
3
456 123
4561 2 3 4
5 6 7 8123
7U910 11
12 456
battery brusher switchbrusher motor
washer motor
intermissionreturn geargrounding
wire
power
supplywashingmotor
returning

BE-43
0 0
00
Body Electric System
Wiping and Washing System
Electric circuit diagram of front and rear brusher and washing system
SY SJ
fuserear defrost relayheating wire
rear defrost switch
1
23
Q
13
2
4rear brusher motor
8
76
5
OFF
ONrear brusher
switch
4
1
23
41
2 rear washer
switch rear washer
motor
3
MI OFF INT LOHIwashing
rear washer
motorfront washer
motor
1
21
2 rear brusher
switchignition
switch rear defrost
switchrear brusher
motor
12
3421
43
front washer
motor
combined switch
123 4
56
789 1011 12 combined switch
876 5 43 2
1
9 10 11
12 13 14
15 16 rear washer
switch
1
2
4
3 rain-brusher
intermissive relayfront brusher
motor
1
23
4
561
23
4
56 72
7
6
5
4
3
2
1
5
4
6
14 3 21
5
front brusher
motor
brusher
switch
3
1
2
456
12
grounding
wire return
washing
intermission
rain-brusher intermissive relay
small lamp switch
OFF1
6
small lamp relay
ONACC
battery
ignition switch
fuse
power
supply
return
ON4 3 2 1
8 7 6 51 2 3 4
5 6 7 8

BE-52Body Electric System
Central Control Lock and Electric Rocker Gear System
Definition for connecting wire of central control lock
1. Y/V Connect the power to the cell anode on vehicle, in front of which a fuse of 15 A should be set, and
anode of 12V when the motor is started, the voltage should not less than 10V
2. B1 Unlocking output of the locking wire of the CCL actuator, and the grounding wire at the normally
central control lock: closed contact inside the relay will contact with the normally opening contact at
the common spots inside relay when unlocking with REMOTE CONTROLLER
or manually, the wire will output 12 V voltage.
3. LG locking signal of The CCL locking signal is connected to the unlocking wire of actuator of CCL,
central control lockand the normally closed contact in the interior relay is grounding wire, which will
output 12 V voltage when unlocking with REMOTE CONTROLLER or manually
and the common spots of relay contacting the normally opening contact.
4. non-connection There is no wire connected at present
5. G/R Right turn lampConnected to the anode wire of the right turn lamp on the vehicle, and it will output
12 V voltage in operation.
6. G/Y Left turn lamp Connected to the anode wire of left turn lamp on the vehicle, and it will output
12 V voltage when in operation
7. Br Negative input ofWhich is connected to the door switch and it is grounding when the door is
door switch opened (the indoor lamp will light)
8. GD ON power check cable Connected to the ON wire of the locking door( there will be 12 v voltage when
rotating the key at
ON
position.
9. Non-connection This wire is not connected temporarily
10. GD/B Lock head lamp outputThere will be 12 V voltage outputted in this wire when opening the door, and will
be powered off (no output) ten seconds later after the door is closed
12. Y/B Locking signal Connected to the locking signal wire of CCL at the left front door, and connect
to the grounding wire when in operation.
13. B Power cathode Connect to the body (grounding wire) it should be as short as possible, because
the overlong wire will produce the interference source. SF
13P
1
2
3
4
5
6
7
8
9
10
11
12
13Power anode 12 V
unlocking signal of central control lock
locking signal of central control lock
no signal
right turn lamp
left turn lamp
negative input of door switch
ON power check cable
no connection
lock head lamp
unlocking signal
locking signal
power cathode
MK
Remark: the inner switch in actuator should be
connected when the actuator is in the locking status
Remark: In case the actuator is in locking status,
connect the switch inside.
ON wire connected to key
hNOs
hj
left front CCL switch
1 2 3 4 5 6
7 8 9 10 11 12 13

BE-55 Body Electric System
CCL and Electric Rocker Gear System
Definition of the connecting wire of CCL
1. G/R (G/W) Turn lampConnected to the anode wire of the turn lamp (right ) on vehicle, it will output 12 V voltage
when it is in operation
2. O
w/b1)Window-shutting signal outputThis wire has one second of voltage output of 12V when the car door is locking. (top SY SJ)
3. No connection
4. G (Y) Unlocking output of CCLConnected to the locking wire of actuator of CCL, and the normally closed contact in the
internal relay is the grounding wire.It will output 12 v voltage when locking with REMOTE
CONTROLLER or manually because the common spot of relay will contact the normally
opening contact.
5. Bl (G) Locking output of CCLConnected to the locking wire of actuator of CCL, and the normally closed contact inside
the internal relay is the grounding wire.It will output 12 V voltage when locking with
REMOTE CONTROLLER or manually because the common sots of relay will contact
with the normally opening contact.
6. Gr (G/B) Turn lampConnected to the anode wire of left turn lamp of vehicle, it will output 12 v Voltage when in
operation.
7. W (W) Manually controlled unlocking signalThe door lock control the locking process through the manual unlocking switch at left front
door, that is, under the locking condition, press the switch, the lock will be opened (the
switch will return to the connection situation automatically after pressing.
8. Br (R/B) Negative output of door switchConnected to the car door lamp switch, it is connected to the grounding wire (the indoor
lamp will light when opening the door.
9. R/G (G/B) Rotating speed testThe car door will lock automatically when the vehicle reaches a certain speed.
10. W(R ) ACC testConnect to the ACC wire, which will have 12 V voltage when the key is rotated to the ACC position.
11. R (R ) Power anode (12V)Connect to the anode of accumulator on vehicle, in front of which should be set the fuse
so that the voltage will be no less than 10V when the starter is in operation.
12. B(B) Power cathodeConnect to the body (grounding wire), it should be short as possible as can because the
overlong wire will produce the interference source.
SY SJ
1
2
3
4
5 6
7
8
9
10
11
12left turning light
manual switch locking signal

closing window output
none
door switch negative input
speed test
ACC test
power anode 12V
remote control opening lock output
power cathode
remote control closing lock output12V
W
K door switchK
M
M
MM
Items in the parenthesis is for SY diesel model
Items with
are configuration for SJ and top SY

BE-56 Body Electric System
CCL and Electric Rocker Gear System
Diagram of electric rocker gear
Dr
main
auxiliary
12
34 512
34 5
12
34 512
345 mainauxiliary
main auxiliary
12
345 12
34 5
12
34 51
2
1 2 3 4 5
6 7 8 9 10 1
2
1
2
43
5
21
345
1 2
21
3 4
R
N2
34 5
21
2 1
34
5
2 1
34
5
1
2 12
345
electric window relay
STON ACC auxiliary
falling
stop
raising
main
falling
stop
raising
auxiliary
main
falling
stop
raising falling
stop
raising
auxiliary
main
falling
raising
falling
stop
raising
right rear
left rear
right front
left
front
inhibitor switch
falling
stop
raisingstop
right front door switch
left front door switch
battery
fuseignition switchignition switch electric rocker gear
left rear door switch
left rear door switch

BE-57 Body Electric System
CCL and Electric Rocker Gear System
SF
right rear door switch
1
2
3
45
left rear door switch
1
2
345
right front door switch
1
2
345
left front door switch
123 456
7 8 9 10 111213
ignition switch
1 2 3 4 5
6 7
U9 10electric rocker gear
1
2 21
52
3 1
4
21
25
1
4 3
1
2
52
1
4 3
21
12
7
13 1
342
electric window relay
ST ON ACC
battery fuse ignition switch
right rear
left rear
right
front
left
front
control lock
12
11
inhibitor switch
Diagram of electric rocker gear

BE-58 Body Electric System
CCL and Electric Rocker Gear System
Diagram of electric rocker gear
SL SK SY
52 11
234
ST ON ACC
N O P Q
R S T U
1
2 1
2
3
4
51
2
3
4
5 1
2
3
4
51
2
3
4
5 1
2
3
4
51
2
5 right rear
auxiliaryfalling
stop
raising
main
falling
stop
raising
auxiliary
main
falling
stop
raising falling
stop
raising
auxiliary
main
falling
raising
falling
stop
raising
inhibitor switch
falling
stop
raisingstop
battery
fuse
mainauxiliary
mainauxiliary
main
auxiliary
electric window relayleft rear
right front
left front
right front door switch
left front door switch
ignition switch electric rocker gear
left rear door switch
ignition switch
N
2
3
4
54 3
left rear door switch
121
5
1234
5
3
24
121
5
1234
5
3 24
121
5
1234
5
3
24

BE-61
Acoustical equipment system
The devices in this series is the vehicle-equipped acoustical receiver and recorder whose function is realized through
the electronic tuner and CD recorder, therefore, it can receive the amplitude modulation, frequency modulation and
stereo broadcast and can record the CD disc, what??s more, it is with the advanced electric anti-quaking, strong capability
of error correction, fashionable blue LCD liquid crystal digital display, and four-way power output. The device in this
series also has the characteristics such as low distortion, large output power and good performance of anti-interference,
broad frequency range and sweet sound, etc.
Diagram of Acoustical equipment system
SF
fuse
ignition switch
ACC ON ST
side-window aerial
CD deviceloudspeaker
ignition switch CD plugging elementplugging elements of rear
loudspeaker of CD device
1 2 3 4 5
6 7 8 9 1012 34
56 78912
34 5 5
4
1 2
3 5 3
8
4
9
75
6
1
7
Note: For Dr the antenna is the rod type.
battery cigarette lighter left front
right frontleft rearright rear
from small lamp relay
2
amplifier
Body Electric System
Acoustical Equipment System