2006 FORD SUPER DUTY Owners Manual

Page 33 of 312

FORD SUPER DUTY 2006 1.G Owners Manual HEATER ONLY SYSTEM (IF EQUIPPED)
1.Fan speed adjustment:Controls the volume of air circulated in the
vehicle.
2.Temperature selection:Controls the temperature of the airflow in
the vehicle.
3.Air flow

Page 34 of 312

FORD SUPER DUTY 2006 1.G Owners Manual To aid in side window defogging/demisting in cold weather:
1. Select
.
2. Modulate the temperature control to maintain comfort.
3. Set the fan speed to the highest setting.
4. Direct the outer instrum

Page 35 of 312

FORD SUPER DUTY 2006 1.G Owners Manual :Distributes outside air through the instrument panel vents, floor
vents and center console vents (if equipped).
O (OFF):Outside air is shut out and the climate system is turned off.
:Distributes outs

Page 36 of 312

FORD SUPER DUTY 2006 1.G Owners Manual AUTOMATIC TEMPERATURE CONTROL SYSTEM (IF EQUIPPED)
Press the AUTO and
(floor/defrost) controls at the same time and
hold for one second to switch between Fahrenheit and Celsius.
1.A/C:Press to activat

Page 37 of 312

FORD SUPER DUTY 2006 1.G Owners Manual 6.(Floor): Distributes air through the floor vents.
7.
(Panel/floor): Distributes air through the instrument panel vents,
floor vents and center console vents (if equipped).
8.
(Panel): Distributes ai

Page 38 of 312

FORD SUPER DUTY 2006 1.G Owners Manual •To improve the A/C cool down, drive with the windows slightly open
for 2–3 minutes after start up or until the vehicle has been “aired out.”
For maximum cooling performance in AUTO mode:
•P

Page 39 of 312

FORD SUPER DUTY 2006 1.G Owners Manual HEADLAMP CONTROL
Turns the lamps off.
Turns on the parking lamps,
instrument panel lamps, license
plate lamps and tail lamps.
Turns the headlamps on.
Autolamp control (if equipped)
The autolamp system

Page 40 of 312

FORD SUPER DUTY 2006 1.G Owners Manual Foglamp control (if equipped)
The headlamp control also operates
the foglamps. The foglamps can be
turned on only when the headlamp
control is in the
,or
position and the high beams are not
turned on.