2006 FORD S-MAX engine oil

14. Refer\fto:\fB\btterie\f\bbklemmen\f(414-01\fB\btterie,\fBefestigung\fund\fB\btteriek\bbel,\fGener\bl\f
Procedures).\f
15. Refer\fto:\fLuftfilter\f(303-12A\fAns\bugsystem\f-\f 2.0L\fDur\btec-HE\f(MI4)/2.3L\fDur\btec-HE\f(MI4),\f
Remov\bl\f\bnd\fInst\bll\btion).\f
16. \f
17. Fill\fthe\fengine\fwith\fengine\foil.\f
Refer\fto:\fSpezifik\btionen\f(303-01B\fMotor\f-\f2.3L\f
Dur\btec-HE\f(MI4),\fSpecific\btions).\f
Material: Engine\fOil\f-\f5W-30\f(WSS-M2C913-B) \f
\f\f
\f\f
Стр. 6 из
6
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G898716&gui...procarmanuals.com
http://vnx.su

Engine - \b.3L \furatec-HE (118kW/160PS)
- MI4 - Oil PumpS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal and Installation
Special Tool(s)
Removal
NO

TE:\fRemov\bl\fsteps\fin\fthis\fprocedure\fm\by\fcont\bin\finst
\bll\btion\fdet\bils.\f
Installation
205-072\f
Univers\bl\fFl\bnge\fHolding\fWrench
\f
205-072-01\f
Ad\bpter\ffor\f205-072\f 1. Remove\fthe\ffollowing\fitems:\f1. Refer\fto:\f Timing\fCh\bin\f(303-01C\fEngine\f-\f
2. 3

L\fDur\btec-HE\f(118kW/160PS)\f-\fMI4,\f
Remov\bl\f\bnd\fInst\bll\btion).\f
2. Refer\fto:\f Oil\fP\bn\f(303-01C\fEngine\f-\f2.3L\f
Dur

\btec-HE\f(118kW/160PS)\f-\fMI4,\f
Remov\bl\f\bnd\fInst\bll\btion).\f
2. \f\f 1.Torque:\b 10\fNm
\f
2. Spec\fal\bTool(s):\b 205-072,\f205-072-01\f
Tor

que:\b 25\fNm
\f
3. CAUTION:\fM\bke\fsure\fth\bt\f\b\fnew\ffriction\f
w \b

sher\fis\finst\blled.\f
4. Torque:\b \f
10\fNm
\f
23\fNm
\f
St\bge\f1:\f
St\bge\f2:\f
1. To\finst\bll,\freverse\fremov\bl\fprocedure\f
\f
\f
\f\f
\f\f
\f\f
Стр. 1 из 1
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G979391&gui...procarmanuals.com
http://vnx.su

Engine - \b.3L \furatec-HE (118kW/160PS)
- MI4 - Crankshaft Rear SealS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal and Installation
Special Tool(s)
Removal
NO

TE:\fRemov\bl\fsteps\fin\fthis\fprocedure\fm\by\fcont\bin\fins t
\bll\btion\fdet\bils.\f
Installation
303-254\f
Locking\fTool,\fFlywheel
\f
1. Refer\fto:\f Tr\bnsmission\f-\f2.3L\fDur\btec-HE\f
(11
8kW/160PS)\f-\fMI4 \f(307-01\fAutom\btic\f
Tr\bn

smission/Tr\bns\bxle\f-\fVehicles\fWith:\f6-
Speed\f
Autom\btic\fTr\bns\bxle\f-\fAWF21,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
2. Disc\brd\fthe\fdriving\fpl\bte\fbolts.\f
Special\bTool(\f):\b 303-254\f
Tor

que:\b \f
50\fNm
\f
80\fNm
\f
112\fNm
\f
St\bge\f1:\f
St\bge\f2:\f
St\bge\f3:\f
3. Refer\fto:\f Oil\fP\bn\f(303-01C\fEngine\f-\f2.3L\f
Dur
\btec-HE\f(118kW/160PS)\f-\fMI4,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
4. NOTE:\fNew\fcr\bnksh\bft\fre\br\fse\bl\fc\brriers\f\bre\f
s
u

pplied\fwith\f\bn\f\blignment\fsleeve\fwhich\f
must\fbe\fremoved\f\bfter\finst\bll\btion.\f
Torque:\b 10\fNm
\f
1. To\finst\bll\freverse\fthe\fremov\bl\fprocedure.\f
\f
\f\f
\f\f
Стр. 1 из 1
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G898717&gui...procarmanuals.com
http://vnx.su

Installation 1. Inst\bll\fthe\fcr\bnksh\bft\foil\fse\bl.\f
Re

fer\fto:\f Cr\bnksh\bft\fFront\fSe\bl \f(303-01A\fEngine\f
-\f2

.0L\fDur\btec-HE\f(107kW/145PS)\f-\fMI4/2.0L\f
Dur\btec-HE\fFlex\fFuel\f(107kW/145PS)\f-\fMI4,\f
Remov\bl\f\bnd\fInst\bll\btion).\f
2. WARNING:\fOnly\frot\bte\fthe\fc\bmsh\bft\f
cl

ockwise.\f
Turn\fthe\fc\bmsh\bfts\fto\fcylinder\fno.\f4\fv\blve\f
ov
erl\bp\fposition.\f
3. Att\bch\fthe\fspeci\bl\ftool.\f
S\fecial Tool(s): 303-376B\f
4. \f
5

. Att\bch\fthe\fspeci\bl\ftool.\f S\fecial Tool(s): 303-748\f
\f\f
\f\f
\f\f
\f\f
\f\f
Стр. 3 из
8
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G898718&gui...procarmanuals.com
http://vnx.su

Engine - \b.3L \furatec-HE (118kW/160PS)
- MI4 - Engine AccessoriesS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal
Special Tool(s)
Ge

neral Equipment
303-122\f
Lifting\fBr\bcket,\fEngine\f
303-254\f
Locking\fTool,\fFlywheel\f
303-435\f
Mounting\fSt\bnd\f
303-435-06\f
Mounting\fBr\bcket\ffor\f303-435\f
303-435-11A\f
Mounting\fPl\bte\ffor\f303-435-06
\f
303-699\f
Wrench,\fOil\fFilter\f
Hose clamp remover/installer
Hydraulic jib crane 1.Install t\be Spe\fial Tool(s): 30
3-435,\f303-435-06,\f
303-435-11A \f
2. Re
move t\be Spe\fial Tool(s): 303-122\f
Gen

eral Equipment: Hydr\bulic\fjib\fcr\bne \f
\f
\f
\f
\f
\f
\f
\f\f
\f\f
Стр. 1 из 4
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G898719&gui...procarmanuals.com
http://vnx.su

Engine - \b.3L \furatec-HE (118kW/160PS)
- MI4 - EngineS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Assembly
Special Tool(s)
Ma

terials
205-072\f
Univers\bl\fFl\bnge\fHolding\fWrench
\f
205-072-01\f
Ad\bpter\ffor\f205-072\f
205-072-02\f
Ad\bpter\ffor\f205-072\f
303-376B\f
Alignment\fPl\bte,\fC\bmsh\bft\f
303-509\f
Remover,\fVibr\btion\fD\bmper\fHub
\f
303-748\f
Locking\fTool,\fCr\bnksh\bft\f
NameSpec\bf\bcat\bo\f
Hypoid\fOil\f85W-90SQ-M2C9002-AA\f/\fA72SX-19K261-CA
Silicone\fSe\bl\bnt\fLBWSE-M4G323-A4\f/\f2U7J-M4G323-AA 1.NOTE:\fNew\fcr\bnksh\bft\fre\br\fse\bl\fc\brriers\f\bre\f
su

pplied\fwith\f\bn\f\blignment\fsleeve\fwhich\f
must\fbe\fremoved\f\bfter\finst\bll\btion.\f
Torque:\b 10\fNm
\f
2. Torque:\b \f
10\fNm
\f
23\fNm
\f
St\bge\f1:\f
St\bge\f2:\f
\f
\f
\f
\f
\f
\f
\f\f
\f\f
Стр. 1 из 8
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G898721&gui...procarmanuals.com
http://vnx.su

Engine - \b.3L \furatec-HE (118kW/160PS)
- MI4 - Engine AccessoriesS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Installation
Special Tool(s)
Ge

neral Equipment
303-122\f
Lifting\fBr\bcket,\fEngine\f
303-254\f
Locking\fTool,\fFlywheel\f
303-435\f
Mounting\fSt\bnd\f
303-435-06\f
Mounting\fBr\bcket\ffor\f303-435\f
303-435-11A\f
Mounting\fPl\bte\ffor\f303-435-06
\f
303-699\f
Wrench,\fOil\fFilter\f
Hose clamp remover/installer
Hydraulic jib crane 1.CAUTION:\fM\bke\fsure\fth\bt\fnew\fbolts\f\bre\f
in

st\blled.\f
Special\bTool(\f):\b 30
3-254\f
Tor
que:\b \f
50\fNm
\f
80\fNm
\f
112\fNm
\f
St\bge\f1:\f
St\bge\f2:\f
St\bge\f3:\f
2. \f\f 1.Torque:\b 20\fNm
\f
2. Torque:\b 10\fNm
\f
3. Torque:\b 25\fNm
\f
4. Torque:\b 10\fNm
\f
\f
\f
\f
\f
\f
\f
\f\f
\f\f
Стр. 1 из 4
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G898722&gui...procarmanuals.com
http://vnx.su

Engine - \b.5L \furatec (16\bkW/\b\b0PS) -
VI5 - SpecificationsS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Engine \fata
Engine Oil
Engine Oil Capacity
Engine Oil Pressure
Valve Clearance
Valves
Descrip\bion
Engine\fcodeHUWA
Firing\forder1-2-4-5-3
Emission\flevelSt\bge\fIV
Bore83\fmm
Stroke93.2\fmm
Cubic\fc\bp\bcity2522\fcm³
Compression\fr\btio9\f:\f1
Power\foutput\f\bt\f5000\frpm162\fkW\f(220\fPS)
M\bx.\ftorque\f\bt\f1500\frpm320\fNm
M\bximum\fengine\fspeed\f(intermittent)6800\frpm
M\bximum\fengine\fspeed\f(continous)6500\frpm
Idle\fspeed800\frpm
Number\fof\fm\bin\fbe\brings6
C\bmsh\bft\fdriveTiming\fBelt
M\bximum\foil\fconsumption0.5\fl/1000\fKm
Viscosi\b\f / ambien\b \bempera\bureT\fpeSpecifica\bion
Recommended engine oil
SAE\f5W-30\f/\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fEWSS-M2C913-C
Alternative engine oils (for top-up only)
SAE\f10W-40\f/\f-20°C\fto\fover\f+40°CFord\fFormul\b\fXR+ACEA\fA3/B3
SAE\f5W-40\f/\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fSACEA\fA3/B3
Descrip\bionLi\bers
Service\ffill\fincluding\ffilter5.8
Service\ffill\fexcluding\ffilter5.5
Descrip\bionBar
Minimum\foil\fpressure\f\bt\f800\f-\f850\frpm\f(norm\bl\foper\bting\ftemper\bture)1.0
Minimum\foil\fpressure\f\bt\f4000\frpm\f(norm\bl\foper\bting\ftemper\bture)3.5
Oil\fpressure\frelief\fv\blve\fopening\fpressure4.8
Descrip\bionmm
V\blve\fcle\br\bnce\f(engine\fcold),\fint\bke0.17\f-\f0.23
V\blve\fcle\br\bnce\f(engine\fcold),\fexh\bust0.37\f-\f0.43
Descrip\bionmm
Int\bke\fv\blve\flenght101.93\f-\f102.07
Int\bke\fv\blve\fsh\bft\fdi\bmeter5.87\f-\f6.01
Int\bke\fv\blve\fguide\fcle\br\bnce0.05\f-\f0.07
Exh\bust\fv\blve\flenght101.43\f-\f101.57
Exh\bust\fv\blve\fsh\bft\fdi\bmeter5.87\f-\f6.01
Exh\bust\fv\blve\fguide\fcle\br\bnce0.05\f-\f0.07
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1037591&gu...procarmanuals.com
http://vnx.su