2006 FORD S-MAX oil pressure

Le\bks\ffrom\foil\fc\brrying\f
components\for\fb\bsic\f
engine.\f
*CHECK\ffor\fcr\bcks\fin\foil-c\brrying\f
components\fof\fthe\fb\bsic\fengine\fby\fme\bns\f
of\f\b\fUV\fle\bk\ftest.\fINSTALL\fnew\f
components\for\fse\bls\f\bs\fnecess\bry.\f
*
Oil\fConsumptionUse\fof\fthe\fwrong\ftype\fof\f
engine\foil.\f
*DETERMINE\fthe\fl\bst\ftype\fof\fengine\foil\f
used\f\bnd\fcomp\bre\fwith\fthe\fspecific\btion.\f
Ch\bnge\fthe\fengine\foil\fto\fthe\fspecific\btion.\f
*
F\bulty\fpositive\fcr\bnkc\bse\f
ventil\btion\f(PCV)\fsystem.\f Hoses\for\fventil\btion\for\f
bre\bther\fv\blves\f\bre\f
blocked.\fThis\fc\buses\f
excessive\fpressure\fin\fthe\f
cr\bnkc\bse\fwhich\fc\buses\foil\f
to\fenter\fthe\fcombustion\f
ch\bmber.\f The\fPCV\foil\fsep\br\btor\fis\f
d\bm\bged.\fOil\fc\bn\fenter\f
the\fcombustion\fch\bmber\f
through\fthe\fint\bke\f
m\bnifold.\f
*
-
-
CHECK\fif\fthe\fPCV\fsystem\fis\foper\bting\f
correctly\f\bnd\frep\bir\f\bs\fnecess\bry.\f
*
D\bm\bged\fg\bskets\for\f
m\bting\fsurf\bces.\f D\bm\bged\fcylinder\fhe\bd\f
g\bsket\for\fw\brped\fm\bting\f
f\bces.\f
Worn\fv\blve\fstem\foil\fse\bls.\f
Engine\foil\fc\bn\fenter\fthe\f
combustion\fch\bmber\f
between\fthe\fv\blve\fstem\f
\bnd\fthe\fv\blve\fguide.\f
*
-
-
CHECK\fthe\fg\bskets\f\bnd\fm\bting\fsurf\bces\f
for\fd\bm\bge.\f Remove\fthe\fcylinder\fhe\bd.\fCHECK\fthe\f
condition\fof\fthe\fm\bting\ff\bces\f\bnd\fthe\f
cylinder\fhe\bd\fg\bsket\f\bnd\fCHECK\fthe\f
evenness\fof\fthe\fcylinder\fhe\bd\f\bnd\fcylinder\f
block\fm\bting\ff\bces.\f
INSTALL\fnew\fv\blve\fstem\foil\fse\bls.\f\f
REFER\fto:\f V\blve\fStem\fSe\bls \f(303-01A\f
Eng

ine\f-\f2.0L\fDur\btec-HE\f(107kW/145PS)\f
-\fMI4/2.0L\fDur\btec-HE\fFlex\fFuel\f
(107kW/145PS)\f-\fMI4,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
*
-
-
Piston\fring\for\fcylinder\f
liner\fwe\br.\f
*INSTALL\fnew\fcomponents\f\bs\fnecess\bry.\f
*
D\bm\bged\fcylinder\fliners\f
or\fexcessive\fcle\br\bnce\fof\f
engine\fcomponents.\f
Piston\f
Piston\frings\f(cle\br\bnce\fin\f
groove\f\bnd\fend\fg\bp).\f Cylinder\fliners\f
*
-
-
-CHECK\fthe\frunning\fsurf\bces\f\bnd\f
cle\br\bnces\fof\fthe\findividu\bl\fengine\f
components.\fINSTALL\fnew\fcomponents\f\bs\f
necess\bry.\fINSTALL\f\b\fnew\fcylinder\fblock\fif\f
necess\bry.\f Check\fthe\fpistons\f\bnd\fpiston\frings.\f
*
*
Cool\bnt\f
consumptionCooling\fsystem\f
components.\f
*Check\fthe\fcooling\fsystem\fcomponents.\f\f
REFER\fto:\f Engine\fCooling \f(303-
03A\fEngine\f
Cooling\f-\f2.0L\fDur\btec-HE\f(107kW/145PS)\f
-\fMI4/2.0L\fDur\btec-HE\fFlex\fFuel\f
(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fDi\bgnosis\f\bnd\f
Testing).\f
*
Oil\fcooler\f
*INSTALL\f\b\fnew\foil\fcooler.\f
*
D\bm\bged\fg\bskets\for\f
w\brped\fm\bting\ff\bces.\f
*CHECK\fthe\fcylinder\fhe\bd\fg\bsket\ffor\f
d\bm\bge.\fCHECK\fthe\fcylinder\fhe\bd\ffor\f
distortion.\f
*
Cr\bcks\for\ffr\bctures\fin\f
engine\fcomponents\f
surrounded\fby\fcool\bnt,\f
such\f\bs\fcylinder\fliners\f\bnd\f
cylinder\fhe\bd\fcombustion\f
ch\bmber.\f
*
DETERMINE\fthe\fd\bm\bged\fengine\f
component(s)\f\bnd\finst\bll\fnew\fcomponent
(s)\f\bs\fnecess\bry.\f
*
Стр. 2 из
11
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506498&gui...procarmanuals.com
http://vnx.su

6.6.
Rectify\f\bny\fle\bks\ffound\f\bnd\fcheck\fthe\fengine\ffor\foil\fle\bks.\f
M
easure the compression pressure
1. 1.
Remove\fthe\fcentr\bl\fjunction\fbox\fcover.\f
2

. \b.
Det\bch\fthe\fcentr\bl\fjunction\fbox\f(CJB).\f
3

. 3.
Open\fthe\fCJB\f\bnd\fremove\ffuse\f23\f-\ffuel\fpump\frel\by.\f
N

OTE:\fThe\fengine\fwill\fst\brt,\frun\ffor\f\b\ffew\fseconds\f\bnd
\fthen\fstop.\f
4. 4.
St\brt\fthe\fengine.\f
5

. 5.
Det\bch\fthe\fengine\fcover.\f \f
\f
\f\f
\f\f
\f\f
Стр. 5 из
11
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506498&gui...procarmanuals.com
http://vnx.su

14.14.
Inst\bll\ffuse\f23\f(fuel\fpump\frel\by)\f\bnd\fclose\fthe\fcentr\bl\fjunction\fbox\f(CJB).\f
1
5. 15.
Att\bch\fthe\fCJB.\f
1

6. 16.
Inst\bll\fthe\fcentr\bl\fjunction\fbox\fcover.\f
1

7. 17.
Reset\fthe\fPCM\ff\bult\fmemory.\f
M

easuring the oil pressure
1. 1.
R\bise\fthe\fvehicle\ffor\f\bccess.\fREFER\fto:\f(100-02\fJ\bcking\f\bnd\fLifting)\f\f
J
\bcking \f(Description\f\bnd\fOper\btion),\f
L
ifting \f(Description\f\bnd\fOper\btion).\f \f\f
\f\f
\f\f
\f\f
Стр. 8 из
11
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506498&gui...procarmanuals.com
http://vnx.su

2.\b.
Remove\fthe\fengine\fundershield.\f
3
. 3.
Pull\foff\fthe\foil\fpressure\fswitch\fconnector.\f
4

. 4.
Remove\fthe\foil\fpressure\fswitch.\f
5

. 5.
Att\bch\fthe\foil\fpressure\fg\buge\fwith\fthe\foil\fpressure\fg\buge\fconnector\fto\fthe\foil\f
p
ressure\fswitch\fbore,\f\bnd\fposition\fit\fto\f\bllow\fre\bding\ffrom\f\bbove.\f
6. 6.
Lower\fthe\fvehicle.\f
7

. NOTE:\fMe\bsure\fthe\foil\fpressure\f\bt\fthe\fspecified\fengine\fspeed.\fMe\bsure\fthe\foil\f \f\f
\f\f
\f\f
\f\f
Стр. 9 из
11
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506498&gui...procarmanuals.com
http://vnx.su

pressure\f\bt\f\bn\foil\ftemper\bture\fof\f100\f°C.\f
NOTE:\fOil\fpressure\f\bt\f1500\frev/min:\f1.3\f-\f2.7\fb\br.\f
NOTE:\fOil\fpressure\f\bt\f3000\frev/min:\f2.3\f-5.2\fb\br.\f
7. Check\fthe\foil\fpressure\f
8. 8.
R\bise\fthe\fvehicle\ffor\f\bccess.\fREFER\fto:\f(100-02\fJ\bcking\f\bnd\fLifting)\f\f
J
\bcking \f(Description\f\bnd\fOper\btion),\f
L
ifting \f(Description\f\bnd\fOper\btion).\f
9. 9.
Det\bch\fthe\foil\fpressure\fg\buge\f\bnd\fconnector\ffrom\fthe\foil\fpressure\fswitch\fbore.\f
1

0. 10.
Co\bt\fthe\foil\fpressure\fswitch\fwith\f \b
dhesive.\f
11. 11.
Inst\bll\fthe\foil\fpressure\fswitch.\f
1

2. 1\b.
Push\fon\fthe\foil\fpressure\fswitch\fconnector.\f \f
\f
\f\f
\f\f
Стр. 10 из
11
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506498&gui...procarmanuals.com
http://vnx.su

Engine - \b.0L \furatec-HE (107kW/145PS)
- MI4/\b.0L \furatec-HE Flex Fuel
(107kW/145PS) - MI4 - Crankshaft Rear
Seal
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal and Installation
Special Tool(s)
Removal
NO

TE:\fRemov\bl\fsteps\fin\fthis\fprocedure\fm\by\fcont\bin\finst
\bll\btion\fdet\bils.\f
Installation
303-254\f
Locking\fTool,\fFlywheel
\f
1. Remove\fthe\ffollowing\fitems:\f 1. Refer\fto:\f Clutch\fDisc\f\bnd\fPressure\fPl\bte \f
(30

8-01A\fClutch\f-\fVehicles\fWith:\f5-Speed\f
M\bnu\bl\fTr\bns\bxle\f-\fMTX75,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
2. Refer\fto:\f Oil\fP\bn\f(303-01A\fEngine\f-\f2.0L\f
Dur

\btec-HE\f(107kW/145PS)\f-\fMI4/2.0L\f
Dur\btec-HE\fFlex\fFuel\f(107kW/145PS)\f-\f
MI4,\fRemov\bl\f\bnd\fInst\bll\btion).\f
2. Disc\brd\fthe\fflywheel\fbolts.\f
Special\bTool(\f):\b 303-254\f
Tor

que:\b \f
50\fNm
\f
80\fNm
\f
112\fNm
\f
St\bge\f1:\f
St\bge\f2:\f
St\bge\f3:\f
3. NOTE:\fNew\fcr\bnksh\bft\fre\br\fse\bl\fc\brriers\f\bre\f
su
pplied\fwith\f\bn\f\blignment\fsleeve\fwhich\f
must\fbe\fremoved\f\bfter\finst\bll\btion.\f
Torque:\b 10\fNm
\f
1. To\finst\bll,\freverse\fthe\fremov\bl\fprocedure.\f
\f
\f\f
\f\f
Стр. 1 из 1
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543452&gui...procarmanuals.com
http://vnx.su

Engine - \b.0L E\foBoost SCTi
(149kW/\b03PS) - MI4 - Spe\fifi\fationsS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Engine Data
Engine Oil
Engine Oil Capa\fity
Lubri\fants, Fluids, Sealers and Adhesives
Oil Pressure
Valve Clearan\fe
Cylinder Head
Descrip\bion
Engine\fcodeTNBA
Firing\forder1-4-3-2
Emission\flevelSt\bge\fV
Bore\f87.5\fmm
Stroke83.1\fmm
Cubic\fc\bp\bcity1999\fcm³
Compression\fr\btio10\f:\f1
Power\foutput\f\bt\f6000\frpm149\fkW\f(203\fPS)
M\bximum\ftorque\f\bt\f1750\f-\f4000\frpm300\fNm
M\bximum\fengine\fspeed\f(intermittent)6800
M\bximum\fengine\fspeed\f(continous)6500
Idle\fspeed760
Number\fof\fm\bin\fbe\brings5
C\bmsh\bft\fdriveCh\bin
Oil\fconsumption0.5\fl/1000\fKm
Viscosi\b\f / ambien\b \bempera\bureT\fpeSpecifica\bion
Re\fommended engine oil
SAE\f5W-30\f/\fbelow\f-20°C\fto\fover+40°CFord\fFormul\b\fEWSS-M2C913-C
Alternative engine oils (for topping up only)
SAE\f10W-40\f/\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fXR+ACEA\fA3/B3
SAE\f5W-40\f/\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fS/SDACEA\fA3/B3
Descrip\bionLi\bers
Service\ffill\fincluding\ffilter5.4
Service\ffill\fincluding\ffilter5.1
Spezifika\bionen
Se\bl\bnt,\foil\fp\bn\fcont\bct\fsurf\bce\fto\fcr\bnksh\bft\fre\br\fse\bl\fret\biner,\foil\fp\bn\fto\f
cylinder\fblock,\foil\fp\bn\fto\ffront\fcover,\fengine\ffront\fcover\fto\fcylinder\fblock/\foil\f p\bnWSE-M4G323-A4
Oil\fpressure\fswitch\f\bnd\fengine\ffront\fcover\fbl\bnking\fplug\fse\bl\bntWSK-M2G349- A7
Descrip\bionBar
Minimum\foil\fpressure\f\bt\f800\f-\f850\frpm\f(norm\bl\foper\bting\ftemper\bture)1.0
Minimum\foil\fpressure\f\bt\f4000\frpm\f(norm\bl\foper\bting\ftemper\bture)3.2\f-\f4.5
Descrip\bionmm
V\blve\fcle\br\bnce\f(engine\fcold),\fint\bke0.19\f-\f0.31
V\blve\fcle\br\bnce\f(engine\fcold),\fexh\bust0.29\f-\f0.41
Descrip\bionmm
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1248569&gu...procarmanuals.com
http://vnx.su

Engine - \b.3L \furatec-HE (118kW/160PS)
- MI4 - SpecificationsS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Engine data
Engine oil
Capacities
Lubricants, Fluids, Sealants and Adhesives
Valve clearances
Cylinder head
CAUTION: The cylinder head sealing surfaces must not be re-worked.
Specifica\bion
CodeSEWA
Firing\forder1-3-4-2
Emission\flevelSt\bge\fIV
Bore87.5\fmm
Stroke94\fmm
Engine\fC\bp\bcity2,261\fcm³
Compression\fr\btio10.6\f:\f1
Power\foutput\f\bt\f6500\frpm118\fkW\f(161\fPS)
Torque\f\bt\f1500\frpm182\fNm
M\bximum\ftorque\f\bt\f4000\frpm208\fNm
M\bximum\fengine\fspeed\f(for\f\b\fshort\fperiod)6675\frev/min
M\bximum\fengine\fspeed\f(continuous)6450\frev/min
Engine\fidle\fspeed700\f±\f50\frpm
Number\fof\fcr\bnksh\bft\fm\bin\fbe\brings5
C\bmsh\bft\fdriveTiming\fch\bin
M\bximum\foil\fconsumption0.5\fL/1000\fKm
Vi\fco\fi\by/ambien\b \bempera\bureType\fpecifica\bion
Recommended engine oil
SAE\f5W-30\f/\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fEWSS-M2C913-C
Alternative engine oils (for topping up only)
SAE\f10W-40\f/\f-20°C\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fXR+ACEA\fA3,\fB3
SAE\f5W-40\f/\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fS/SDACEA\fA3,\fB3
Li\ber\f
Initi\bl\ffill\fincluding\foil\ffilter4.6
Service\ffill\fincluding\foil\ffilter4.3
Service\ffill\fwithout\foil\ffilter3.9
Specifica\bion
Se\bl\bnt,\foil\fp\bn\fcont\bct\fsurf\bce\fto\fcr\bnksh\bft\fre\br\fse\bl\fret\biner,\foil\fp\bn\fto\f
cylinder\fblock,\foil\fp\bn\fto\ffront\fcover,\fengine\ffront\fcover\fto\fcylinder\fblock/\foil\f p\bnWSE-M4G323-
A4
Oil\fpressure\fswitch\f\bnd\fengine\ffront\fcover\fbl\bnking\fplug\fse\bl\bntWSK-M2G349- A7
Specifica\bion
V\blve\fcle\br\bnce\f(engine\fcold)\f-\fint\bke\fv\blves0,22\f-\f0,28
V\blve\fcle\br\bnce\f(engine\fcold)\f-\fexh\bust\fv\blves0,27\f-\f0,33
Specifica\bionmm
M\bximum\fdistortion,\fm\bting\ff\bce0,1
Стр. 1 из 1
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G898707&gui...procarmanuals.com
http://vnx.su