2006 FORD S-MAX fuel pump

1.1.
Remove\fthe\fcentr\bl\fjunction\fbox\fcover.\f
2
. \b.
Det\bch\fthe\fcentr\bl\fjunction\fbox\f(CJB).\f
3

. 3.
Open\fthe\fCJB\f\bnd\fremove\ffuse\f23\f-\ffuel\fpump\frel\by.\f
N

OTE:\fThe\fengine\fwill\fst\brt,\frun\ffor\f\b\ffew\fseconds\f\bnd
\fthen\fstop.\f
4. 4.
St\brt\fthe\fengine.\f
5

. 5.
Det\bch\fthe\fengine\fcover.\f \f
\f
\f\f
\f\f
\f\f
Стр. 5 из
11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G898709&gui...procarmanuals.com
http://vnx.su

14.14.
Inst\bll\ffuse\f23\f(fuel\fpump\frel\by)\f\bnd\fclose\fthe\fcentr\bl\fjunction\fbox\f(CJB).\f
1
5. 15.
Att\bch\fthe\fCJB.\f
1

6. 16.
Inst\bll\fthe\fcentr\bl\fjunction\fbox\fcover.\f
1

7. 17.
Reset\fthe\fPCM\ff\bult\fmemory.\f
M

easuring the oil pressure
1. 1.
R\bise\fvehicle.\fREFER\fto:\f(100-02\fJ\bcking\f\bnd\fLifting)\f\f
J
\bcking \f(Description\f\bnd\fOper\btion),\f
L
ifting \f(Description\f\bnd\fOper\btion).\f \f\f
\f\f
\f\f
\f\f
Стр. 8 из
11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G898709&gui...procarmanuals.com
http://vnx.su

Engine - \b.5L \furatec (16\bkW/\b\b0PS) -
VI5 - EngineS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
\fiagnosis and Testing
General Equipment
Mat

erials
Specification
WSK-M2G349-A7\f\f
Measure the compression pressure
NO
TE:\fThe\fpowertr\bin\fcontrol\fmodule\f(PCM)\freceives\f\bn\f
error\fmess\bge\fwhen\fthe\ffuel\f
pump\frel\by\fis\fremoved\for\felectric\bl\fcomponents\f\bre\fdisconnected.\fThis\ferror\fmess\bge\f
must\fbe\fdeleted\ffrom\fthe\ff\bult\fmemory\fusing\fworldwide\fdi\bgnostic\fsystem\f(WDS)\f\bfter\f
completing\fthe\fcompression\ftest.\f
NOTE:\fV\blve\fcle\br\bnce\fmust\fbe\fset\fcorrectly\fbefore\fperforming\f\b\fcompression\ftest.\fRun\f
the\fengine\fto\fnorm\bl\foper\bting\ftemper\bture.\f
NOTE:\fThe\fv\brying\fdesign\fof\fcompression\fchecking\fdevices\f\bnd\ffluctu\bting\fst\brter\fmotor\f
speeds\fnorm\blly\fonly\f\bllows\ffor\f\b\fcomp\brison\fto\fbe\fm\bde\fof\fthe\fcompression\fpressures\fin\f
\bll\fcylinders.\f
1. 1.
Remove\fthe\fcentr\bl\fjunction\fbox\f(CJB)\fcover.\f
2

. \b.
Open\fthe\fCJB\f\bnd\fremove\ffuse\f22.\f
3

. NOTE:\fThe\fengine\fwill\fst\brt,\frun\ffor\f\b\ffew\fseconds\f\bnd\fthen\fstop.\f
3.
St\brt\fthe\fengine.\f
4. 4.
Disconnect\fthe\fignition\fcoil-on-plug.\f\f
R
EFER\fto:\fZündspule\f-\fDirektzündung\f(303-07C,\fRemov\bl\f\bnd\fInst\bll\btion).\f
Worldwide\fDi\bgnostic\fSystem\f(WDS).
Name
Adhesive\f-\fLoctite\f243
\f\f
\f\f
Стр. 1 из 5
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G549214&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi (74kW/\b00PS) - Lynx/\b.8L \furatorq-T\fCi (92kW/\b25PS) -
Engine \fata - \b00 PS
Engine \fata - \b25 PS
Lubricants, Fluids, Sealers and Adhesives
Engine Oil Capacity
Cylinder Block \fimensions
Piston \fimensions
Descrip\bion
Code
Emi\b\bion le\fel
Firing order
Bore diameter
Stroke
Di\bplacement
Compre\b\bion ratio
Maximum power output at 3850 rpm
Maximum torque at 1800 rpm
Idle \bpeed
Maximum oil con\bumption
Descrip\bion
Code
Emi\b\bion le\fel
Firing order
Bore diameter
Stroke
Di\bplacement
Compre\b\bion ratio
Maximum power output at 3700 rpm
Maximum torque at 1800 rpm
Idle \bpeed
Maximum oil con\bumption
I\be\f
Ford Formula E SAE 5W-30 engine oil
Coolant
Sealant - oil pan to ladder frame
Sealant - ladder frame to cylinder block
Sealant - cam\bhaft bearing cap no. 1
Sealant - fuel pump pulley
Initial fill including oil filter
Ser\fice fill including oil filter
Ser\fice fill without oil filter
Descrip\bion
Cylinder bore diameter - Cla\b\b 1
Cylinder bore diameter - Cla\b\b 2
Main bearing parent bore diameter
Descrip\bion
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G978040&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi
(74kW/\b00PS) - Lynx/\b.8L \furatorq-
T\fCi (92kW/\b25PS) - Lynx - Engine
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
\fescription and Operation
Engine\f

Tr\bnsversely-mounted\f4-cylinder\fin-line\fturbo\fdiesel\fengine\fwith\fdirect\ffuel\finjection,\f
b\bs

ed\fon\fthe\f1.8L\fDur\btorq\fDI\f\f

1.8L\fcubic\fc\bp\bcity\fwith\f74kw\f(100\fPS)\f\bnd\f92kW\f(125\fPS)\f\f

Turboch\brger\fwith\fv\bri\bble\fturbine\fgeometry\f\bnd\fintercooler\f\f

Common\fr\bil\ffuel\finjection\fsystem\f\f

Du\bl\fm\bss\fflywheel\ffor\fthe\freduction\fof\fdrive\fnoise\f
Common\fr\bil\ffuel\finjection\fsystem\f

High-pressure\fpump\ffor\fthe\fgener\btion\fof\fpressure\fin\fthe\ffuel\fr\bil\fwith\fintegr\bl\ftr\bnsfer\f
pu

mp\ffor\ffuel\fsupply\f\f

Fuel\fr\bil\ffor\fconst\bnt\ffuel\fpressure\f\f

Piezo\ffuel\finjectors\ffor\foptim\bl\fmetering\fof\fthe\ffuel\fqu\bntity\f\f

V\bri\bble\fpilot\f\bnd\fm\bin\finjection\ffor\foptimiz\btion\fof\fnoise\femissions\f
Engine\fm\bn\bgement\f

A\fSiemens\fPowertr\bin\fControl\fModule\f(PCM)\f(one\fbox\fdesign)\fwith\f128\fpins\ffor\ffuel-
qu

\bntity\fregul\btion,\fcontrol\fof\fthe\ffuel\finjectors,\fexh\bust\fg\bs\frecircul\btion\f\bnd\fintegr\bted\f
\f
Стр. 1 из 3
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506579&gui...procarmanuals.com
http://vnx.su

Measure the compression pressure
NOTE:\fThe\fpowertr\bin\fcontrol\fmodule\f(PCM)\freceives\f\bn\f
error\fmess\bge\fwhen\fthe\ffuel\f
pump\frel\by\fis\fremoved\for\felectric\bl\fcomponents\f\bre\fdisconnected.\fThis\ferror\fmess\bge\f
must\fbe\fdeleted\ffrom\fthe\ff\bult\fmemory\fusing\fworldwide\fdi\bgnostic\fsystem\f(WDS)\f\bfter\f
completing\fthe\fcompression\ftest.\f
NOTE:\fV\blve\fcle\br\bnce\fmust\fbe\fset\fcorrectly\fbefore\fperforming\f\b\fcompression\ftest.\fM\bke\f
sure\fthe\fengine\fis\f\bt\fthe\fnorm\bl\foper\bting\ftemper\bture.\f
NOTE:\fThe\fv\brying\fdesign\fof\fcompression\fchecking\fdevices\f\bnd\ffluctu\bting\fst\brter\fmotor\f
speeds\fnorm\blly\fonly\f\bllows\ffor\f\b\fcomp\brison\fto\fbe\fm\bde\fof\fthe\fcompression\fpressures\fin\f
\bll\fcylinders.\f
Measure the compression pressure (Engine - \b.8L \furatorq -
T\fCI (Kent) \fiesel)
WARNINGS:\f
Do\f
not\fsmoke\for\fc\brry\flighted\ftob\bcco\for\fopen\ffl\bme\fof\f\bny\ftype\fwhen\fworking\fon\for\f
ne\br\f\bny\ffuel\frel\bted\fcomponents.\fHighly\ffl\bmm\bble\fmixtures\f\bre\f\blw\bys\fpresent\f\bnd\fc\bn\f
ignite.\fF\bilure\fto\ffollow\fthese\finstructions\fm\by\fresult\fin\fperson\bl\finjury.\f
Do\fnot\fc\brry\fout\f\bny\frep\birs\fto\fthe\ffuel\finjection\fsystem\fwithout\fchecking\fth\bt\fthe\f
fuel\fpressure\fh\bs\fdropped\fto\fzero\f\bnd\fth\bt\fthe\ffuel\ftemper\bture\fh\bs\feither\fre\bched\f
\bmbient\ftemper\bture\for\fis\fbelow\f30°C,\fwhichever\fis\fthe\fgre\bter.\fF\bilure\fto\ffollow\fthese\f
instructions\fm\by\fresult\fin\fperson\bl\finjury.\f
1. \b.
Using\fd\bt\blogger\fin\f w
orldwide\fdi\bgnostic\fsystem\f(WDS) ,\fcheck\fth\bt\fthe\ffuel\f
pre
ssure\fh\bs\fdropped\fto\fzero\f\bnd\fth\bt\fthe\ffuel\ftemper\bture\fh\bs\feither\fre\bched\f
\bmbient\ftemper\bture\for\fis\fbelow\f30°C,\fwhichever\fis\fthe\fgre\bter.\f
2. 2.
Open\fthe\fcentr\bl\fjunction\fbox\f(CJB)\f\bnd\fremove\fthe\fglow\fplug\frel\by.\f
3

. NOTE:\fThe\fengine\fupper\fcover\fis\fheld\fin\fpl\bce\fby\f4\fb\bll\fclips.\fThe\fb\bll\fclips\f\bre\fnot\f
v
e

rtic\bl,\fbut\f\bre\f\bngled\fb\bckw\brds\fby\f\bpproxim\btely\f20\fdegrees.\f
3. Loc\btion\fof\fthe\fengine\fupper\fcover\fret\bining\fclips.\f
\f\f
\f\f
Стр. 5 из 11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506580&gui...procarmanuals.com
http://vnx.su

injector\f\bnd\fthe\fblue\fidentific\btion\fcoll\br\f\bdj\bcent\f
to\fthe\ffuel\fr\bil.\f
NOTE:\fThe\ffuel\fsupply\fline\fmust\fbe\finst\blled\fwith\f
the\fyellow\fidentific\btion\fcoll\br\f\bdj\bcent\fto\fthe\ffuel\f
pump\f\bnd\fthe\fblue\fidentific\btion\fcoll\br\f\bdj\bcent\fto\f
the\ffuel\fr\bil.\f
NOTE:\fThe\fhigh-
pressure\ffuel\fsupply\flines\fmust\fbe\f
connected\fimmedi\btely\f\bfter\fremoving\fthe\fbl\bnking\f
plugs.\f
NOTE:\fDo\fnot\f\bllow\fthe\funions\fto\fhit\fthe\fends\fof\f
the\fhigh-pressure\ffuel\fsupply\fline.\fTo\f\bid\f
inst\bll\btion\fof\fthe\fnew\fhigh-pressure\ffuel\fsupply\f
lines,\fthe\funions\f\bt\fthe\ffuel\fr\bil\fend\f\bre\fcolored\f
gold.\f
Tighten\fthe\ffuel\finjector\fhigh-
pressure\ffuel\fsupply\flines\f
in\fthe\fsequence\fshown.\f
Torque: 1-5\f25\fNm
\f
6-10\f38\fNm
\f
thermost\bt\fhousing\f23\fNm
\f
v\bcuum\fpipe\f18\fNm
\f
35. Torque:
1\f7\fNm
\f
2\f23\fNm
\f
3\f23\fNm
\f
36. Inst\bll\fthe\fFuel\fFilter.\f Refer\fto:\f Fuel\fFilter \f(310-01B\fFuel\fT\bnk\f\bnd\fLines\f-
\f
1.8L\fDur\btorq-TDCi\f(74kW/100PS)\f-\fLynx/1.8L\f
Dur\btorq-TDCi\f(92kW/125PS)\f-\fLynx,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
37. Torque: 23\fNm
\f
38. \f\f 1.Torque: 3\fNm
\f
2. Torque: 5\fNm
\f
\f\f
\f\f
\f\f
\f\f
Стр. 17 из
19
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543577&gui...procarmanuals.com
http://vnx.su

20.CAUTION: Tw\fs\b\fng \bhe exhaus\b flex\fble p\fpe more \bhan 2 degrees may cause damage resul\b\fng \fn fa\flure.
21. Remove \bhe accessory dr\fve bel\b. Refer \bo: Accessory Dr\fve Bel\b (303-
05D Accessory Dr\fve
TDC\f (92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
22. Secure \bhe Power S\beer\fng Pump \bo one s\fde.
General \bqui\fment: Cable \b\fes
23.

Secure \bhe A/C compressor \bo one s\fde.
General \bqui\fment: Cable \b\fes
24.

D\fsconnec\b \bhe PCM elec\br\fcal connec\bors.
Refer \bo: Power\bra\fn Con\brol Module (PCM) (303-
14E Elec\bron\fc Eng\fne Con\brols
Lynx/1.8L Dura\borq-TDC\f (92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
25.D\fsconnec\b \bhe fuel supply l\fne and fuel re\burn l\fne qu\fck release coupl\fngs.
Refer \bo: Fuel F\fl\ber (310-01B Fuel Tank and L\fnes - 1.8L Dura\borq
(92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
26.
WARNING: Make sure \bha\b \bhe eng\fne and \bransm\fss\fon assembly \fs on wooden blocks and secured w\f\bh
su\f\bable re\ba\fn\fng s\braps.
Us\fng a su\f\bable workshop \bable.
Gen
eral \bqui\fment: Veh\fcle/axle s\bands
Ge n

eral \bqui\fment: Cable \b\fes




Стр. 4 из 6
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543580&gui...procarmanuals.com
http://vnx.su