Page 89 of 504
▫ Overhead Rail System — If Equipped .......182
▫ Removable Floor Console With Fold-In-Floor
Seating — If Equipped .................184
▫ Removable Floor Console Without Fold-In-Floor
Seating — If Equipped .................185
▫ Rear Compartment Storage Bins ...........189 ▫ Cargo/Tub Nets ......................189
▫ Coat Hooks .........................189
▫ Cargo Area Storage ....................189
Roof Luggage Rack — If Equipped ..........190
Load Leveling System ...................193UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89
3
Page 90 of 504
MIRRORS
Inside Day/Night Mirror
Adjust the mirror to center on the view through the rear
window. A two point pivot system allows for horizontal
and vertical adjustment of the mirror. Annoying headlight glare can be reduced by moving the
small control under the mirror to the night position
(toward rear of vehicle). The mirror should be adjusted
while set in the day position (toward windshield).
Automatic Dimming Mirror — If Equipped
If the switch is in the “ Auto ” position the mirror will
automatically adjust for annoying headlight glare from
vehicles behind you. You can turn the feature on or off by
pressing the button at the base of the mirror. A light in the
button will illuminate to indicate when this feature is on.
MANUAL REARVIEW MIRROR90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Page 91 of 504
CAUTION!To avoid damage to the mirror during cleaning,
never spray any cleaning solution directly onto the
mirror. Apply the solution onto a clean cloth and
wipe the mirror clean.
Driver ’ s Side Outside Mirror Auto Dimmer — If
Equipped
This mirror automatically adjusts for annoying headlight
glare from vehicles behind you. You can turn this feature
on or off by pressing the button at the base of the
Rearview Mirror.
Exterior Mirrors Folding Feature
All exterior mirrors are hinged and may be moved either
forward or rearward to resist damage. The hinges have
three detent positions; full forward, full rearward, and
normal.AUTO MIRROR UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91
3
Page 92 of 504

Outside Mirror — Driver ’ s Side
Adjust the outside mirror to center on the adjacent lane of
traffic, with a slight overlap of the view obtained on the
inside mirror.
Outside Mirror — Passenger ’ s Side
Adjust the convex outside mirror so you can just see the
side of your vehicle in the portion of the mirror closest to
the vehicle. This type of mirror will give a much wider
view to the rear, and especially of the lane next to your
vehicle. WARNING!Vehicles and other objects seen in the right side
convex mirror will look smaller and farther away
than they really are. Relying too much on your right
side mirror could cause you to collide with another
vehicle or other object.
Use your inside mirror when judging the size or
distance of a vehicle seen in this convex mirror.
Power Remote-Control Mirrors — If Equipped
Use the mirror select switch, located on the instrument
panel to the left of the steering column, to adjust the view
obtained in the outside mirrors. Press the rocker switch to
the L or R for Left or Right mirror selection. Use the
center off position to guard against accidentally moving
a mirror position.92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Page 93 of 504
Select a mirror and press one of the four arrows for the
direction you want the mirror to move. Heated Remote Control Mirrors — If Equipped
These mirrors are heated to melt frost or ice. This feature
is activated whenever you turn on the Rear Window
Defrost.
Illuminated Vanity Mirrors — If Equipped
An illuminated vanity mirror is on the sun visor. To use
the mirror, rotate the sun visor down and swing the
mirror cover upward. The lights turn on automatically.
Closing the mirror cover turns off the lights.
Sun Visor Extension — If Equipped
This feature has a pull out extension on the sun visor for
increased coverage.Power Mirror Switches UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93
3
Page 94 of 504

HANDS – FREE COMMUNICATION (UConnect ™ ) —
IF EQUIPPED
UConnect ™ is a voice-activated, hands-free, in- vehicle
communications system. UConnect ™ allows you to dial
a phone number with your cellular phone using simple
voice commands (e.g., Call ” “ Mike ” ” Work or Dial ”
“ 248-555-1212 ). Your cellular phone ’ s audio is trans-
mitted through your vehicle ’ s audio system; the system
will automatically mute your radio when using the
UConnect ™ system.
NOTE: The UConnect ™ system use requires a cellular
phone equipped with the Bluetooth Hands-Free Profile,
version 0.96 or higher. See www.chrysler.com/uconnect
for supported phones.
UConnect ™ allows you to transfer calls between the
system and your cellular phone as you enter or exit your
vehicle, and enables you to mute the system ’ s micro-
phone for private conversation. The UConnect ™ phonebook enables you to store up to 32
names and four numbers per name. Each language has a
separate 32 name phonebook accessible only in that
language. This system is driven through your Blue-
tooth ™ Hands-Free profile cellular phone. UConnect ™
features Bluetooth ™ technology - the global standard
that enables different electronic devices to connect to
each other without wires or a docking station, so UCon-
nect works no matter where you stow your cellular
phone (be it your purse, pocket, or briefcase), as long as
your phone is turned on and has been paired to the
vehicle ’ s UConnect ™ system. The UConnect ™ system
allows up to seven cellular phones to be linked to system.
Only one linked (or paired) cellular phone can be used
with the system at a time. The system is available in
English, Spanish, or French languages (as equipped).
The rearview mirror contains the microphone for the
system and the control buttons that will enable you to
access the system.94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Page 95 of 504

The UConnect ™ system can be used with any Hands-
Free Profile certified Bluetooth ™ cellular phone. See
www.chrysler.com/uconnect for supported phones. If
your cellular phone supports a different profile (e.g., Headset Profile), you may not be able to use any UCon-
nect ™ features. Refer to your cellular service provider or
the phone manufacturer for details.
The UConnect ™ system is fully integrated with the
vehicle ’ s audio system. The volume of the UConnect ™
system can either be adjusted from the radio volume
control knob, or from the steering wheel radio control
(right switch), if so equipped.
The radio display will be used for visual prompts from
the UConnect ™ system such as CELL or caller ID on
certain radios.
Operations
Voice commands can be used to operate the UConnect ™
system and to navigate through the UConnect ™ menu
structure. Voice commands are required after most
UConnect ™ system prompts. You will be prompted for a
specific command and then guided through the available
options.UConnect ™ Switches UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95
3
Page 96 of 504

• Prior to giving a voice command, one must wait for
the voice on beep, which follows the Ready prompt
or another prompt.
• For certain operations, compound commands can be
used. For example, instead of saying Setup and then
Phone Pairing, the following compound command
can be said: Setup Phone Pairing.
• For each feature explanation in this section, only the
combined form of the voice command is given. You
can also break the commands into parts and say each
part of the command, when you are asked for it. For
example, you can either use the combined form voice
command Phonebook New Entry, or you can break
the combined form command into two voice com-
mands: Phonebook and New Entry. Please remem-
ber, the UConnect ™ system works best when you talk
in a normal conversational tone, as if speaking to some
one sitting eight feet away from you. Voice Command Tree
Refer to “ Voice Tree ” at the end of this section.
Help Command
If you need assistance at any prompt or if you want to
know what your options are at any prompt, say Help
following the voice on beep. The UConnect ™ system will
play all the options at any prompt if you ask for help.
To activate the UConnect ™ system from idle, simply
press the ’ Phone ’ button and follow audible prompts for
directions. All UConnect ™ system sessions begin with a
press of the ’ Phone ’ button on the mirror.
Cancel Command
At any prompt, after the voice on beep, you can say
Cancel and you will be returned to the main menu.
However, in a few instances the system will take you
back to the previous menu.96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE