2006 DODGE DAKOTA Owners Manual

Page 345 of 408

DODGE DAKOTA 2006 3.G Owners Manual Removing Headlamp from AssemblyRemoving Headlamp Bulb
MAINTAINING YOUR VEHICLE 345
7

Page 346 of 408

DODGE DAKOTA 2006 3.G Owners Manual 6. Reverse procedure to install new Headlamp bulb into 
the headlamp assembly. 
NOTE: These are Halogen bulbs. Take care not to touch 
the bulb with your fingers. Body oils from your fingers
could cau

Page 347 of 408

DODGE DAKOTA 2006 3.G Owners Manual •Rotate bulb socket 1/4 turn and remove socket from 
housing.
•Pull bulb straight from socket.
•Reverse procedure to install new turn signal bulb.
Removing Turn Signal Bulb
Disconnecting Turn Si

Page 348 of 408

DODGE DAKOTA 2006 3.G Owners Manual Rear Side Marker, Taillamps/Stoplamp, and Turn 
Signal Bulbs — Replacement
1. Remove the two (2) screws that pass through the bed
sheetmetal. 2. Pull the taillamp housing straight out from the body.

Page 349 of 408

DODGE DAKOTA 2006 3.G Owners Manual 3. Rotate the bulb socket from the housing. 4. Pull bulb straight out of socket.
Rotating Bulb Socket From HousingPulling Bulb From Socket
MAINTAINING YOUR VEHICLE 349
7

Page 350 of 408

DODGE DAKOTA 2006 3.G Owners Manual 5. Reverse Procedure to install bulb and housing. Place 
the two raised blocks passed the body.Center High-Mounted Stoplamp And Cargo Lamp
1. Remove the two (2) screws holding the housing/lens
to the

Page 351 of 408

DODGE DAKOTA 2006 3.G Owners Manual 2. Remove housing from Cab 3. Remove connector from housing tab for more clear- ance.
Removing Housing from Cab
Removing Connector from Tab
MAINTAINING YOUR VEHICLE 351
7

Page 352 of 408

DODGE DAKOTA 2006 3.G Owners Manual 4. Turn desired bulb socket1�4turn and remove socket 
and bulb from housing.  5. Pull desired bulb straight from the socket.
•Outside Bulbs: Cargo Lamps
•Inside Bulb: Center High Mount Stop Lamp
R