2006 DODGE DAKOTA lock

[x] Cancel search: lock

Page 341 of 408

DODGE DAKOTA 2006 3.G Owners Manual I.O.D. cavity includes a snap-in retainer that allows the 
fuse to be disconnected, without removing it from the
fuse block.
•The transfer case should be placed in the 4HI mode
and kept in this posi

Page 343 of 408

DODGE DAKOTA 2006 3.G Owners Manual 1. Open the hood. 
2. Remove the 3 screws attaching the headlamp housing 
to the inner panel. 
3. Grasp the headlamp and pull firmly to disengage the 
headlamp housing from the fender panel. 
4. While

Page 344 of 408

DODGE DAKOTA 2006 3.G Owners Manual Removing Headlamp BulbUnlocking Connector
344 MAINTAINING YOUR VEHICLE

Page 350 of 408

DODGE DAKOTA 2006 3.G Owners Manual 5. Reverse Procedure to install bulb and housing. Place 
the two raised blocks passed the body.Center High-Mounted Stoplamp And Cargo Lamp
1. Remove the two (2) screws holding the housing/lens
to the

Page 353 of 408

DODGE DAKOTA 2006 3.G Owners Manual 6. Reverse procedure for installation of bulbs and hous- 
ing.
License Lamps
1. Using a screw driver pry black rubber housing from
the bumper. 2. Rotate the socket 1/4 turn counterclockwise.
Removing

Page 354 of 408

DODGE DAKOTA 2006 3.G Owners Manual 3. Pull bulb from socket. 
4. Reverse procedure for installation.Fog Lamps
1. Disconnect connector from fog lamp by raising wire 
harness lock tab and pulling on wire harness connector. 
2. Rotate fog

Page 390 of 408

DODGE DAKOTA 2006 3.G Owners Manual Adding Fuel........................ 253,282 
Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 313
Air Conditioner Maintenance  ............... 316 
Air Conditioning  ........................ 189

Page 391 of 408

DODGE DAKOTA 2006 3.G Owners Manual Ball Joints............................. 317 
Battery  ............................... 315 
Charging  ............................ 293 
Emergency Starting  ..................... 293 
Gas Caution  ....