Rear flashing turn in-
dicator bulbs
R10W / 12 V / 10 W with OE White turn
indicators:
RY10W / 12 V / 10 W
Turn bulb 2clockwise to
install it in bulb socket 3. Position the bulb housing
on the turn indicator hous-
ing.
Install screw
1.
Jump start
The wires leading to the
power socket do not
have a load-capacity rating
adequate for jump-starting
the engine. Excessively high
current can lead to a cable
fire or damage to the vehicle
electronics.
Do not use the on-board
socket to jump-start the
engine of the motorcycle.
Touching live parts of
the ignition system with
the engine running can cause
electric shock.
Do not touch parts of the igni-
tion system when the engine
is running.
A short-circuit can result
if the crocodile clips of
the jump leads are accident-
ally brought into contact with
the motorcycle.
Use only jump leads fitted
7114zMaintenance
