If ASC self-diagnosis did not
complete, the ASC warning
light continues to flash.
The ASC function is activ-
ated.
Instead of pressing the ASC
button, you have the option
of switching the ignition off
and then on again.An ASC fault has
occurred if the ASC
warning light shows when the
motorcycle accelerates to a
speed in excess of 10 km/h
after the ignition was switched
off and then on again.Front and rear seatsRemoving rear seatMake sure the ground is
level and firm and place the
motorcycle on its stand. Turn key
1counter-
clockwise in the seat
lock.
Lift the seat at the rear and
release the key. with OE Seat heating:
Disconnect plug 2by
squeezing locking tabs 3
together at top and
bottom.
Pull the seat to the rear to
release it from its holders.
Place the seat, upholstered
side down, on a clean sur-
face.
Remove the front seatRemoving rear seat ( 65)
465zOperation
