2006 BMW 650I CONVERTIBLE Owner's Manual

Page 33 of 236

BMW 650I CONVERTIBLE 2006 E64 Owners Manual Opening and closing
32 >this device must accept any interference 
received, including interference that may 
cause undesired operation.
Any unauthorized modifications or 
changes to these devices coul

Page 34 of 236

BMW 650I CONVERTIBLE 2006 E64 Owners Manual Controls
 33Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
7.Press the controller.
 The setting is selected.
The setting is stored for the remote control cur-
rent

Page 35 of 236

BMW 650I CONVERTIBLE 2006 E64 Owners Manual Opening and closing
34
Luggage compartment lid
During opening, the luggage compart-
ment lid pivots back and up. Make sure 
there is sufficient clearance.<
Opening from inside
Press the button:
The lu

Page 36 of 236

BMW 650I CONVERTIBLE 2006 E64 Owners Manual Controls
 35Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
The handle recesses on the interior trim of the 
luggage compartment lid make it easier to pull 
down.
I

Page 37 of 236

BMW 650I CONVERTIBLE 2006 E64 Owners Manual Opening and closing
36
Indicator lamp displays
>The indicator lamp below the interior rear-
view mirror flashes continuously: the sys-
tem is armed.
>The indicator lamp flashes after locking: the 
doo

Page 38 of 236

BMW 650I CONVERTIBLE 2006 E64 Owners Manual Controls
 37Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
>The engine can only be started if the vehicle 
detects that the remote control carried is 
located in t

Page 39 of 236

BMW 650I CONVERTIBLE 2006 E64 Owners Manual Opening and closing
38
Replacing battery
The remote control for comfort access contains 
a battery which must be replaced occasionally.
1.Remove integrated key from remote con-
trol, refer to page28.

Page 40 of 236

BMW 650I CONVERTIBLE 2006 E64 Owners Manual Controls
 39Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Together
1.Briefly press button1:
The LEDs in the button1 and the switch2 
light up for approx. 10 secon