2005 YAMAHA VX110 water pump

E
A50001-1-4
SYMBOLS
Symbols 1 to 9 are designed to indicate the
content of a chapter.
1General Information
2Specifications
3Periodic Inspection and Adjustment
4Fuel System
5Power Unit
6Jet Pump Unit
7Electrical System
8Hull and Hood
9Trouble Analysis
Symbols 0 to E indicate specific data.
0Special service tool
ASpecified oil or fluid
BSpecified engine speed
CSpecified tightening torque
DSpecified measurement
ESpecified electrical value
(resistance, voltage, electric current)
Symbols F to I in an exploded diagram indi-
cate the grade of lubricant and the lubrication
point.
FApply Yamaha 4-stroke motor oil
GApply water resistant grease
(Yamaha grease A, Yamaha marine grease)
HApply ThreeBond 1104J or ThreeBond 1280B
IApply molybdenum disulfide grease
Symbols J to N in an exploded diagram indi-
cate the type of sealant or locking agent and
the application point.
JApply Gasket Maker
KApply LOCTITE 271 (red)
LApply LOCTITE 242 (blue)
MApply LOCTITE 572
NApply silicone sealant
NOTE:
Additional symbols may be used in this man-
ual.
12
34
56
78
90
AB
CD
EF
GH
IJ
KL
MN
GEN
INFOSPEC
INSP
ADJFUEL
POWRJET
PUMP
–+ELECHULL
HOOD
TRBL
ANLS
T R..
E
A1280B1104J
MGM
271
LT
242
LT
572
LTSS
ProCarManuals.com

2-1
ESPECGENERAL SPECIFICATIONS
GENERAL SPECIFICATIONS
Item UnitModel
VX110 Sport VX110 Deluxe
Model code
Hull F1K
Engine/jet 6D3
Dimensions
Length mm (in) 3,220 (126.8)
Width mm (in) 1,170 (46.1)
Height mm (in) 1,150 (45.3)
Dry weight kg (lb) 325 (716)
Maximum capacity Person/kg (lb) 3/240 (530)
Performance
Maximum output kW (PS) @ r/min 81.0 (110) @ 8,000
Maximum fuel consumption l/h (US gal/h,
lmp gal/h)28.0 (7.4, 6.2)
Cruising range h 2.1
Engine
Engine type 4-stroke, L4, DOHC
Displacement cm
3 (cu. in) 1,052 (64.2)
Bore ×
stroke mm (in) 76.0 ×
58.0 (2.99 ×
2.28)
Compression ratio 11.4:1
Exhaust system Wet exhaust
Lubrication system Dry sump
Cooling system Water cooled
Starting system Electric starter
Ignition system TCI
Ignition timing Degree BTDC 5–BTDC 35
Spark plug model
(manufacturer)CR9EB (NGK)
Spark plug gap mm (in) 0.7–0.8 (0.028–0.031)
Battery capacity V/Ah 12/19
Generator output A @ r/min 12–21 @ 6,000
Drive unit
Propulsion system Jet pump
Jet pump type Axial flow, single stage
Impeller rotation Counterclockwise (viewed from rear)
Transmission Constant mesh 1-speed
Jet thrust nozzle horizontal
angleDegree 24 + 24
Jet thrust nozzle trim angle Degree 3
Reverse system—Reverse gate
ProCarManuals.com

2-13
ESPECTIGHTENING TORQUES
Jet pump unit
Steering cable joint Nut — 1 6.8 0.68 4.9
242LT6-3
Ride plate Bolt M8 4 17 1.7 12
572LT6-1
Intake grate BoltM6
27.60.765.5
242LT6-1
M10 40 4.0 29
Speed sensor Screw M5 4 3.7 0.37 2.7
242LT6-1
Jet pump unit assembly BoltM6 1 7.8 0.78 5.6
572LT6-3
M10 4 40 4.0 29
Rubber plateBolt M6 4
6.80.684.9 6-3
Nut — 2
Bracket Bolt M8 217 1.7 12
6-3
14 1.4 10
271LT
Reverse gate Bolt M8 2 15 1.5 11271LT6-5
Reverse gate ball joint Nut — 1 7.8 0.78 5.6
242LT6-5
Reverse gate spring Nut — 1 7.8 0.78 5.6
242LT6-5
Spout hose clamp — —1 1.2 0.12 0.9 6-5
1 2.2 0.22 1.6 6-3
Jet thrust nozzle Bolt M8 2 15 1.5 11
271LT6-6
Nozzle/bracket Bolt M10 4 40 4.0 29
572LT6-6
Water inlet cover/water inlet
strainerBolt M6 4 6.6 0.66 4.8
572LT6-6
Cap Bolt M6 3 7.8 0.78 5.6
572LT6-8
Impeller Impeller M22 1 75 7.5 54
572LT6-8
Transom plate Nut — 4 26 2.6 19 6-15
Intermediate housing cover Bolt M8 4 17 1.7 12
271LT6-18
Driven couplingDriven
couplingM24 1 36 3.6 26
572LT6-19
Clamp — — 2 4.2 0.42 3.0 6-18
Hull and hood
Handlebar holder Bolt M8 4 20 2.0 14
572LT8-1
Upper handlebar cover ScrewM4 2 1.1 0.11 0.8
8-1
M5 4 1.1 0.11 0.8
Lower handlebar cover Screw M6 4 3.7 0.37 2.7
271LT8-1
Throttle lever assembly Screw M5 2 3.4 0.34 2.5 8-4
Handlebar switch assembly Screw M5 2 3.4 0.34 2.5 8-4
Grip end Bolt M5 2 1.2 0.12 0.9
242LT8-4
Steering column Bolt M8 4 17 1.7 12
572LT8-20
Steering cable ball joint Ball joint — 1 6.9 0.69 5.0 8-20
Steering arm Bolt M8 1 20 2.0 14
242LT8-20
Steering sensor Bolt M8 4 16 1.6 12
572LT8-21
Spacer Bolt M8 3 16 1.6 12
572LT8-21
Shift cable holder
(Deluxe model only)Bolt M6 2 6.9 0.69 5.0
242LT8-23
Shift cable seal
(Deluxe model only)Nut — 1 5.9 0.59 4.3 8-23 Part to tightenedPart
nameThread
sizeQ’tyTightening torque
RemarksRefer to
page
Nm kgfm ftlb
ProCarManuals.com

2-14
ESPECTIGHTENING TORQUES
Shift cable locknut
(Deluxe model only)Nut—1 3.8 0.38 2.7572LT8-23
Steering cable locknut
(steering column side)Nut—1 6.5 0.65 4.7 8-23
Steering cable locknut
(jet pump side)Nut—1 6.8 0.68 4.9
572LT8-23
Steering cable seal Nut—1 5.9 0.59 4.3 8-23
Steering cable bracket Bolt M6 1 6.9 0.69 5.0
572LT8-23
Speed sensor lead grommet Nut—1 5.9 0.59 4.3 8-23
Hinge assembly Bolt M6 2 6.9 0.69 5.0 8-8
Hood lock assembly Bolt M5 2 1.9 0.19 1.4
572LT8-8
Hinge assembly Bolt M6 4 6.9 0.69 5.0
242LT8-8
Lid lock hook Bolt M6 2 6.9 0.69 5.0
242LT8-8
Mirror (Deluxe model only) Nut—4 15 1.5 11 8-8
Shift handle lever
(Deluxe model only)Screw M5 2 3.70.372.7
572LT8-11
Multifunction meter Bolt M5 4 3.9 0.39 2.8
572LT8-11
Engine hatch cover
(Deluxe model only)Bolt M6 1 6.9 0.69 5.0
572LT8-11
Engine hatch cover Bolt M6 8 6.9 0.69 5.0
572LT8-11
Detent plate Bolt M6 2 8.0 0.8 5.8
572LT8-16
Shift lever bracket
(Deluxe model only)Nut—2 15 1.5 11 8-16
Pilot water outlet Nut—1 4.2 0.42 3.0 8-17
Hand grip Nut—4 6.9 0.69 5.0 8-28
Seat bracket Nut—2 15 1.5 11 8-28
Seat lock projection Bolt—1 26 2.6 19 8-28
Seat lock assembly Bolt M6 2 6.4 0.64 4.6
271LT8-28
Plate/rubber hose/exhaust
valveNut—6 5.4 0.54 3.9 8-31
Hose clamp 1——2 3.7 0.37 2.7 8-31
Hose clamp 2——1 3.7 0.37 2.7 8-31
Joint clamp 1 and 4——2 3.7 0.37 2.7 8-31
Joint clamp 2 and 31st
——22.40.241.7
8-31
2nd 2.4 0.24 1.7
Sponson Bolt M810161.612
572LT8-36
Cleat Nut—2
15 1.5 11 8-36
4
Spout Nut—1 5.4 0.54 3.9 8-36
Protector (bow) Nut—5 6.9 0.69 5.0 8-36
Bow eye Bolt M6 2 13 1.3 9.4 8-36
Drain plug/packing Screw M5 4 2.0 0.2 1.4 8-36
Engine mount Bolt M8 8 17 1.7 12
572LT8-38
Engine damper Bolt M6 2 6.6 0.66 4.8
271LT8-38 Part to tightenedPart
nameThread
sizeQ’tyTightening torque
RemarksRefer to
page
Nmkgfmftlb
ProCarManuals.com

2-16
ESPECCABLE AND HOSE ROUTING
CABLE AND HOSE ROUTING
K
E2
1
3
4
5
6
7
8
90
D
C
A
B
Ê
ÈÉ
1
2
5
6
7
6
J
A
A
H
I
G
F
0
62 7
K-K
J-J
I-I
H-H
G-G
A-A
B-B
C-C
D-D
E-E
F-F
BB
CC
EE
FF
DD
II
II
GG
H
H
K
KJ
J
A
A
BB
1Fuel tank breather hose
2Steering cable
3Throttle cable
4Fuse box
5Starter motor lead
6Positive battery lead
7Negative battery lead
8Battery
9Cooling water outlet hose
0Shift cable (Deluxe model only)
ASpeed sensor leadBCooling water inlet hose
CFuel hose
DElectric fuel pump
EAccelerator position sensor
FAntenna lead (Deluxe model only)
GRemote control unit lead (Deluxe model only)
HBilge hose joint
ICooling water hose joint
JCooling water pilot outlet hose
KAccelerator position sensor lead
ProCarManuals.com

2-19
ESPECCABLE AND HOSE ROUTING
12
Ð
Ò
Ó
Õ
Î
ÍÌ
È
É
È
É
Ñ
Ô
3
4
5678
4
B
O
P
5
N
C
D
A09H-H
EFGH
I
P
G
G-G
A
BD
F C
E
JJ
M
C
F
I
I
E
DB
A
A
ÏÐ
H
H
G
G
JK
0
Q
L
Ê
Ë
MWater separator
NElectric fuel pump
OOil separator breather hose (to air intake duct)
PWiring harness
QCooling water inlet hose
ÈFasten the steering sensor lead, handlebar
switch lead, multifunction meter lead, and
buzzer lead with plastic tie 2.ÉFasten the speed sensor lead, fuel sender lead,
wiring harness, and antenna lead (Deluxe
model only) with plastic tie 1 at the white tape on
the wiring harness.
ÊDeluxe model
ËSport model
ÌTo remote control unit (Deluxe model only)
ÍFasten the antenna lead and wiring harness
with a plastic tie at the white tape. (Deluxe
model only)
ÎTo engine unit (Deluxe model only)
ProCarManuals.com

E
INSP
ADJ
1
2
3
4
5
6
7
8
9
CHAPTER 3
PERIODIC INSPECTION AND ADJUSTMENT
MAINTENANCE INTERVAL CHART .............................................................. 3-1
PERIODIC SERVICE ....................................................................................... 3-2
CONTROL SYSTEM ................................................................................. 3-2
Steering column inspection ................................................................. 3-2
Steering cable inspection and adjustment .......................................... 3-2
Throttle cable inspection and adjustment............................................ 3-4
Shift cable inspection and adjustment (Deluxe model only)................ 3-5
Trolling speed inspection .................................................................... 3-6
FUEL SYSTEM.......................................................................................... 3-7
Fuel line inspection ............................................................................. 3-7
Water separator inspection ................................................................. 3-8
POWER UNIT............................................................................................ 3-8
Valve clearance adjustment ................................................................ 3-8
Engine oil level check........................................................................ 3-14
Engine oil change — using oil changer ............................................. 3-16
Air filter element clean....................................................................... 3-18
Spark plug inspection ........................................................................ 3-20
ELECTRICAL .......................................................................................... 3-22
Battery inspection.............................................................................. 3-22
JET PUMP UNIT ..................................................................................... 3-25
Impeller inspection ............................................................................ 3-25
Water inlet strainer inspection ........................................................... 3-25
BILGE PUMP........................................................................................... 3-26
Bilge strainer inspection .................................................................... 3-26
GENERAL ............................................................................................... 3-26
Drain plug inspection......................................................................... 3-26
Lubrication points .............................................................................. 3-26
ProCarManuals.com

3-7
E
INSP
ADJ
FUEL SYSTEM
FUEL SYSTEM
WARNING
When removing fuel system parts, wrap
them in a cloth and take care that no fuel
spills into the engine compartment.
Fuel line inspection
1. Inspect:
Fuel pump filter
Clog/contaminants →
Clean.
Refer to “FUEL TANK AND FUEL
PUMP MODULE” in Chapter 4.
Fuel hose
Cracks/damage →
Replace.
O-rings (quick connector)
Cracks/damage →
Replace the quick
connector.
Fuel rail
Cracks/damage →
Replace.
Refer to “FUEL INJECTION SYSTEM”
in Chapter 4.
Fuel filler hose
Fuel filler cap
Cracks/damage →
Replace.
2. Inspect:
Fuel tank
Cracks/damage →
Replace.
Water accumulation →
Remove.
NOTE:
To remove water from the fuel tank, remove
the fuel filler hose 1
and use a siphon pump.
Refer to “FUEL TANK AND FUEL PUMP
MODULE” in Chapter 4.
1
ProCarManuals.com