
Remote keyless entry system 
Your car is equipped with two coded remote control transmitters with integrated ignition keys called Key Integrated
Remote (KIR). These transmitters use a  radio frequency that will enable you to lock/unlock all doors and  the trunk
from  a  distance of 10-15 feet (3-5 meters).
The transmitters will also activate or allow "keyless"  entry into the passenger  compartment or the trunk. They will also
activate or deactivate the vehicle's alarm system(s).
The car can also be  locked/unlocked with the key.
If one  of the transmitters is misplaced, contact your nearest authorized Volvo retailer for replacement.
1 - Fold key in/out, 2 - Lock,  3 - Approach  lighting, 4 - "Panic" function, 5 - Open trunk, 6- Unlock
Using  the remote control  
Button 1: Press to extend the key.  This button must  also be  pressed when the key  is folded back into the slot  in the side
of the remote control unit.
Button  2 ( Lock): Press once to lock all doors, and  the trunk.
Button  3 ( Approach lighting ): Press this  button when approaching  the car at night to light up the interior  courtesy
light, parking lights, license plate  lights and  the lights in the sideview mirrors.
Button  4 ( Panic): See  page 67
 for more information on this  function.
Button  5 ( Open trunk  ): Press this  button twice within 3 seconds to pop open  the trunk (without unlocking the other
doors).
Button  6 ( Unlock): Press this  button once to unlock the driver's door only. Wait  for at least 1 second and  press the
button again (within 10 seconds) to unlock all doors, and  the trunk.
NOTE :
ProCarManuals.com 

2 0 0 5 
VOLVO S80
Chapter 10 - Audio systems
pg. 151 Audio systems
Introduction152
HU-650 overview153
HU-850 overview154
Audio functions  HU-650/HU-850155
Radio functions  HU-650/HU-850157
CD  player HU-650162
Internal CD  changer  - HU-850163
External CD  changer  (option) - HU-650/HU-850164
Cassette deck HU-650165
Dolby Surround Pro Logic II HU-850166
Audio systems - specifications168
HomeLink® Universal Transceiver (option)169
pg. 152 Introduction
The audio system in your car is operated  with the buttons  and  knobs in the system's front  panel. Certain  functions,
such as adjusting the volume, changing radio stations or tracks on a  CD, etc, can also be  controlled with the optional
steering wheel-mounted keypad.
The audio system is available in two versions:
HU-650
Features: AM/FM radio, single-disc CD player, cassette player, 4x25W  output, six speakers.
HU-850
Features: AM/FM radio, integrated 6-disc CD changer, 4x50W  or 4x70W  output plus 25W  Dolby Pro Logic II, eleven
speakers.
ProCarManuals.com 

1. On/off - press 
Volume - turn 
2. Selector knob for:  
Stored radio stations 
Press to store  a  station 
CD changer - selecting disc (option) 
3. Selector knob: 
Radio _ FM,  AM 
Cassette 
CD 
CD changer (option) 
Press to open  the main menu. 
4. Fader - press and  turn 
Balance - press to release the control, pull and  turn to adjust 
5. Exit (exit the menu) 
6. Scan  function (automatically search for radio stations) 
7. Navigations buttons  (seek/change radio station or CD track) 
8. CD eject 
9. CD slot  
10. CD random play 
11. FM  
12. AM 
13. CD player 
14. Automatically search for radio stations 
15. Bass - press and  turn 
Treble - press to release the control, pull and  turn to adjust 
16. Tape direction selector 
CD changer (option) - random play 
17. Cassette opening 
18. Cassette eject
pg. 154 Audio system  HU-850 - overview
ProCarManuals.com 

1. On/off - press 
Volume - turn 
2. Bass - press and  turn 
Treble - press to release the control, pull and  turn to adjust 
3. Fader - press and  turn 
Balance - press to release the control, pull and  turn to adjust 
4. Center volume - press and  turn 
Effect  channel volume - press, pull and  turn 
5. Selector knob for:  
Stored radio stations 
CD - changer (option), selecting a  disc 
6. Source/Menu 
Press to open  main menu 
Turn  to select FM,  AM, CD, 
CD changer (option), selecting a  disc 
7. Exit (exit the menu) 
8. Scan  function (automatically search for radio stations) 
9. Navigations buttons  (seek/change radio station or CD track) 
10. CD eject 
11. Dolby Pro Logic II 
12. 2 channel stereo 
13 3 channel stereo 
14. CD slot  
15. CD random play 
16. AM 
17. FM  
18. CD player 
19. Automatically search for radio stations 
20. Display
pg. 155 Audio functions HU-650/HU-850
ProCarManuals.com 

Switch on/off 
Press the knob to switch on or turn off the radio.
Volume control 
Turn  the knob clockwise to increase volume. Volume control is electronic  and  does not have an  end  stop. If you have
a  key  pad  in the steering wheel, increase or decrease  the volume with the +  or- buttons.
Volume control - ALARM 
If a  CD is playing when the radio receives an  alarm bulletin (available  in certain areas only), the CD player enters
pause mode. The bulletin is broadcast at the volume selected for this  type of message.
After the bulletin has been completed, the audio system reverts to the originally selected sound source (radio or CD),
which  is played at the volume that was selected for that source. 
If the bulletin volume is adjusted while the bulletin is being broadcast, this  new volume is saved and  used for
subsequent  bulletins.
Bass  
Adjust the bass by pressing the button to extend the control and  turning it to the left (less bass) or to the right (more
bass). A "detent"  indicates "equalized" bass. Press the button back in when you have made the adjustment.
Treble  
Adjust the treble by pressing the button to extend the control, pulling it out as far as possible, and  then turning it to the
left (less treble) or to the right (more treble). A "detent"  indicates "equalized" treble. Press the button back in when you
have made the adjustment.
MID EQ  level  
This function is used to fine-tune the balance of sound in the speakers.  To set the level: 
1. Press SOURCE.  
2. Turn  the SOURCE  knob, select ADVANCED MENU  and  press SOURCE.  
3. Turn  the SOURCE  knob, select AUDIO SETTINGS and  press SOURCE.  
4. Turn  the SOURCE  knob, select MID  EQ LEVEL and  press SOURCE.  
5. Turn  the SOURCE  knob, select the desired level  and  press SOURCE.  
6. Press EXIT.
pg. 156 Radio functions HU-650/HU-850
ProCarManuals.com 

Fader - Balance front/rear 
Adjust front/rear speaker balance by pressing the button to extend the control and  turning it to the left (more sound
from  the rear speakers) or to the right (more sound from  the front  speakers). A "detent"  indicates "equalized" balance.
Press the button back in when you have made the adjustment.
Balance right/left  
Adjust left/right speaker balance by pressing the button to extend the control, pulling it out as far as possible and  then
turning it to the left (more sound from  the left speakers) or to the right (more sound from  the right speakers). A
"detent"  indicates "equalized" balance. Press the button back in when you have made the adjustment.
 
Selecting a sound source
The sound source (e.g. AM, FM,  etc) can be  selected in two ways: 
· Use the sound source buttons  (see the right illustrations above). 
· Turn  the SOURCE  knob (see illustration above) to select a  sound source (AM,  FM,  cassette, or CD). Press the knob
to select the AM or FM  band  of your choice. 
The sound source selected will be  shown in the display.
pg. 157 Audio systems  HU-650/HU-850
Scan  
Press the SCAN button to start the station scan function. When a  station is found, scanning stops for approximately 10
seconds, after which  scanning will continue.  
Press the SCAN or EXIT button when a  station has been found if you would like to listen to that station and  to
discontinue the scan function.
Station seek up/down  
Press 
 to start the seek function. The radio seeks the next audible  station and  tunes it in. Repeat the procedure
to continue  the seek function.
Manual station search  
Press 
 and  hold it down. MAN will be  shown in the display. The radio scans slowly in the selected direction
and  will increase the scanning speed after a  few seconds. Release the button when the desired frequency appears in the
ProCarManuals.com 

display. 
The frequency can be  fine-tuned by short presses on the  keys. 
The system will remain in manual  search mode for 5 seconds after the button is released, after which  it will return to
seek mode.
Audio system controls on the steering wheel
Steering wheel  key pad (option)  
If the vehicle is equipped with the key  pad  in the steering wheel press the right or left arrow to switch between preset
stations.
pg. 158 Radio functions HU-650/HU-850
Storing stations  
1. Tune to the desired station. 
2. Press the knob. Choose a  number by turning the knob. Press again to store  the station.
Preset 
To choose a  preset station, turn button to the stored  number. The currently selected station is displayed.
Storing stations automatically  
This function automatically  searches  for and  stores up to 10 strong AM or FM  stations in a  separate memory. If more
than ten stations are found, the ten strongest ones are stored.  This function is especially useful  in areas in which  you
are not familiar with radio stations or their frequencies. 
To use the AUTO function: 
ProCarManuals.com 

1. Select  radio mode using the AM or FM  buttons.  
2. Start the search by pressing AUTO for more than 2 seconds. 
3. AUTO appears in the display and  a  number of stations with strong (max. 10) from  the selected frequency band  will
be  stored  in the auto-store  memory. If there are no stations with sufficient signal strength, NO  STATION is displayed. 
4. Press the AUTO button or the arrow keys on the optional steering wheel controls briefly to select the stored  stations.
When the radio is in auto-store  mode, AUTO is shown in the display. AUTO disappears when you return to the
normal radio mode. 
Return to the normal radio mode by pressing the AM, FM,  or EXIT button or turn the PRESET/CD knob. 
To return to the Auto-store  mode, press the AUTO button briefly.
pg. 159 Radio functions HU-650/HU-850
Radio Broadcast Data System - RBDS
This feature, which  may not be  available in your area, functions only with FM  broadcasts. The radio in your car is
equipped with an  advanced system allowing information from  broadcasters to be  transmitted visually, as text, together
with the audio signal. This information is then decoded by the radio and  made available for several new and  unique
features.
The RBDS or Radio Broadcast Data System  operates in the FM  band  only, and  the information transmitted is supplied
exclusively by participating broadcasters. Volvo has no control over the accuracy of the data or information.
Coverage by local  broadcasters may be  limited at this  time, but as the technology  and  benefits grow, you will find the
radio in your car is equipped to take advantage of this  system.
PI (Program Information) Seek:
When an  FM  station has been stored  as a  preset, the radio also stores RBDS program information if it is available.
When the preset is selected at a  later time, the radio tries to access updated program information. In weak signal areas,
there may be  a  delay before the station becomes audible.  During this  delay, "PI seek" will be  displayed and  there will
be  no sound.
PI seek can be  interrupted by pressing EXIT.
Radio text
Certain  RBDS stations broadcast program information, which  can be  shown in the display. The text will be  shown
twice in the display.
To start this function:
Press the FM  button for several seconds.
To deactivate this function:
Press FM  briefly.
Station information will be  shown twice in the display.
Alarm
Alarms  bulletins  are transmitted automatically  by certain RBDS stations. The function cannot be  deactivated.
"Alarm!" is shown in the radio display when an  alarm message is sent. The function is used to warn motorists of
ProCarManuals.com