602005 MR2 from Aug. ’04Prod. (OM17527U)
SB13118b
Rearmost
positionMore than
3 notches
CHILD RESTRAINT SYSTEM
INSTALLATION
1. Fold down the seatback and slide
the seat backward into the rearmost
position. Then slide it forward by
more than 3 notches.
SB13117a
9th lock
position1st lock
position
2. Raise the seatback back to the 1st
lock position (most upright position)
until it locks into place. Adjust the
seatback to the 9th lock position.
Make sure the seatback is locked se-
curely.SB13115a
Ty p e A
612005 MR2 from Aug. ’04Prod. (OM17527U)
SB13114a
Ty p e B
3. Type A—Latch the hooks of lower
straps onto the lower anchorages lo-
cated between the seat cushion and
seatback, and tighten the lower
straps.
Type B—Latch the buckles onto the
lower anchorages located between
the seat cushion and seatback.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see “—Using
a top strap” on page 58.)
For installation details, refer to the instruc-
tion manual equipped with each product.CAUTION
When using the lower anchorages
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
the seat belt is not caught.
Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
After securing the child restraint
system, never slide the seat or
change the seatback angle.
