Page 575 of 627
11 - 7 6
Maintenance and service
!
High beam light bulbs
1. Disconnect the electrical connector from the bulb.
2. Remove the bulb from the headlight assembly by
turning it counterclockwise.
3. Replace the bulb with new one.
4. Reconnect the electrical connector. At this time,
use care not to touch the bulb surface.
5. To install the bulb to the headlight assembly, turn it
clockwise until it clicks. ! Parking light
It may be difficult to replace the bulbs. Have your SUB-
ARU dealer replace the bulbs if necessary. !
Front turn signal light
It may be difficult to replace the bulbs. Have your SUB-
ARU dealer replace the bulbs if necessary. ! Front fog light (if equipped)
It may be difficult to replace the bulbs. Have your SUB-
ARU dealer replace the bulbs if necessary. ! Rear combination lights
! Sedan
1. Push the knobs of the cover to open the cover.
UBB531BA
UBB210BA
Page 576 of 627
11 -7 7
Maintenance and service
– CONTINUED –
A) Rear turn signal light
B) Backup light
C) Brake/tail and rear side marker light
2. Remove the bulb holder from the rear combination
light assembly by turning it counterclockwise.
3. Remove the bulb from the socket by pushing it and
turning counterclockwise. Install a new bulb.
4. Set the bulb holder into the rear combination light
assembly and turn it clockwise until it locks.
5. Securely lock the cover against the trunk trim by
using the screwdriver to turn the top knob clockwise. !
Station wagon
1. Using a Phillips screwdriver, remove the upper andlower screws.
A
B
CUBB206BB
UBB533BA
Page 578 of 627
11 -7 9
Maintenance and service
– CONTINUED –
A) Brake/tail light
B) Rear turn signal light
C) Rear side marker light
4. Remove the bulb holder from the rear combination
light assembly by turning it counterclockwise.
5. Remove the bulb from the socket by pushing it and
turning counterclockwise. Install a new bulb.
6. Set the bulb holder into the rear combination light
assembly and turn it clockwise until it locks.
7. Close the cover and latch the lock.
8. Reinstall the rear combination light assembly and
its side cover. !
Backup light (Station wagon)
1. Use a flat-head screwdriver to remove the light cov-
er from the top of the left hand rear gate trim.
C A
B
UBB201BB
UBB536BA
Page 579 of 627
11 - 8 0
Maintenance and service
2. Turn the bulb socket counterclockwise and remove it.
3. Pull the bulb out of the bulb socket and replace it
with a new one.
4. Install the bulb socket by turning it clockwise. Install
the light cover on the rear gate. !
License plate light
! Sedan
It may be difficult to replace the bulbs. Have your SUB-
ARU dealer replace the bulbs if necessary.
UBB590BAUBB538BA
Page 581 of 627
11 - 8 2
Maintenance and service
!
Dome light
1. Remove the lens by prying the edge of the lens with
a flat-head screwdriver. 2. Turn the bulb until the flat surfaces at its ends are
aligned vertically. Pull the bulb straight downward to
remove it. Install a new bulb.
3. Reinstall the lens.
UBB541BA
UBB589BA
Page 582 of 627
11 -8 3
Maintenance and service
– CONTINUED –
!Map light0
1. Remove the lens by prying the edge of the lens with
a flat-head screwdriver. 2. Turn the bulb until the flat surfaces at its ends are
aligned vertically. Pull the bulb straight downward to remove it.
3. Install a new bulb.
4. Reinstall the lens.
PASSENGER
UB9200BA
UBB580BA
Page 583 of 627
11 - 8 4
Maintenance and service
!
Door step light
1. Remove the lens by prying the edge of the lens with
a flat-head screwdriver. 2. Pull the bulb out of the socket. Install a new bulb.
3. Reinstall the lens.
UBB545BA
UBB546BA
Page 584 of 627
11 -8 5
Maintenance and service
– CONTINUED –
!Cargo area light
1. Remove the cargo area light assembly by prying
the edge of the light with a flat-head screwdriver.
2. Remove the lens from the cargo area light assem-
bly. 3. Pull the bulb out of the socket. Install a new bulb.
4. Reinstall the lens.
UBB543BA
UBB544BA