2005 SKODA SUPERB display

RADIO NAVIGATION SYSTEM44
NAVIGATION
After selecting a destination and determining
the route options, you can start route guidance
by confirming the “Start guidance” menu field
in the main navigation menu.
This will activate either the map or the symbol
display.
Refer to page 9 for more information on the
map and symbol displays.Route calculation
After route guidance has been activated, the
system will begin to calculate the route. This
process may take a few seconds. During this
time, the display will show the driving direction
to the selected destination with the message
“Calc. route” and you will hear the following
voice output: “The route is being calculated.”
The display will also indicate the distance to
the destination “as the crow flies”.If the vehicle is located on a digitised street,
route guidance will begin with acoustic and vis-
ual driving recommendations once route cal-
culation has been completed.
If the vehicle is not located on a digitised street
(e.g. car park, garage, indoor parking), “Off
road” will appear on the left in the display.
Outside of the area stored on the navigation
CD (e.g. in a foreign country) this message will
read “Off map”.
If the system is unable to calculate a route to
the selected destination, “No route” will appear
in the display.
In these cases, follow the driving direction sym-
bol, which will guide you in the direction to your
destination. As soon as you reach a digitised
road, acoustic and visual driving recommen-
dations will be provided.
Driving recommendations
The driving recommendations for route guid-
ance are provided in the form of spoken driving
recommendations and directional symbols in
the symbol display on the screen.
The recommendations are always given well
in advance so that you have plenty of time to
prepare for any upcoming turns.

RADIO NAVIGATION SYSTEM45
NAVIGATION
Important!
All the information provided during
route guidance can be considered only
as recommendations. The Road Traffic
Code always takes priority, even if the
driving recommendation should
contradict the Road Traffic Code.
Symbol display
The symbol display indicates the number of
GPS satellites within reception range and the
status of the traffic congestion function, the es-
timated time of arrival or the driving time and
the distance from the destination, the driving
direction display , the distance bar graph to
the next intersection/turn with information on
the remaining distance and the name of the
street you are currently travelling on. If you will
soon be required to make a turn, the driving
direction display will indicate in which direction
you will have to turn. Above that, you will also
see the name of the street you will turn onto.
Switching to the map display
•Press the menu knob.
Displaying the complete destination
address
Press INFO
33 33
3 to briefly display your current
vehicle location, the current destination, the
time of arrival or the driving time and the dis-
tance to the destination. You will also hear the
current spoken driving recommendation.
Cancelling route guidance
To cancel active route guidance, press 99 99
9.
This will return you to the main navigation
menu.
•Mark and confirm the “Stop guidance” menu
field to cancel route guidance.
If you do not want to cancel route guidance,
mark and confirm the “Back to guidance” menu
field and route guidance to the currently se-
lected destination will continue.

RADIO NAVIGATION SYSTEM46
NAVIGATION
Activating the map menu
•Press the menu knob to activate the map
menu in the map display.
Changing the map scale (zoom)
•Turn the menu knob to manually select the
desired map scale by way of the segment
fields. The map scale selected will appear on
the left.
•Press the menu knob to confirm your
selection. Note
If segment “A” is marked and confirmed, the
map will appear in auto-zoom mode. This
means that the map will automatically appear
in the correct map scale. The correct map scale
depends on the distance to the next point
where a turn will be made and the road
classification of the road you are travelling on
(e.g. motorway). The map will be displayed in
zoom mode as you approach the next turning
point (see page 48).
Adding to the map contents
This menu field activates a submenu, which
you can use to select other symbols for the
map in addition to those symbols that are
already displayed automatically (motorway
petrol stations/service centres, airports,
·koda·koda ·koda·koda
·kodaAuto service centres, town centres).•Mark and confirm the menu fields for “Fill-
ing station”, “Station” or “Car park” in the sub-
menu.
•Use the “End” menu field to exit the sub-
menu.
During route guidance, the symbols selected
will then appear on the map in the correspond-
ing map scale.
Notes
The menu fields selected will be marked with
a checkmark.
Press the menu knob again to remove the
checkmark.
Activating the symbol display in the map
display
•Mark and confirm the “Symbol” menu field.
The symbol display will appear.
Press the menu knob to return to the map
display.
Making settings in the map menu

RADIO NAVIGATION SYSTEM47
NAVIGATION
Selecting the menu field for “map
detail”
If you select the “Map detail” menu field, you
can choose the following settings in the sub-
menu that appears:
–Alignment
-In your driving direction
- In the direction of the destination
- Due north
- Automatic
– Map type
-Location map (displays your current ve-
hicle location)
- Overview map (displays your current ve-
hicle location and your destination)
- Destination map (displays your destina-
tion)
– Move
-Activates the move mode to view differ-
ent sections of the map
– Zoom setting
-Activates the Autozoom submenu to se-
lect the map scale using Autozoom
Selecting the “Alignment” menu field
•Confirm the “Alignment” menu field.
•Mark and confirm the desired alignment in
the following submenu.
Following this the map will appear, the mark
indicating your current vehicle location will be
placed in the centre of the map. Direction of travel
- The map will be shown
facing in the direction you are driving in all
scales and will turn to reflect any changes in
direction you make.
Direction of destination - The map will be
shown facing in the direction of the destina-
tion.
Northwards - The map will face due north.
Automatic - The map will be aligned depend-
ing on the map scale selected:
• 100 m - 2 km: In driving direction
•5 km - 500 km: Due north
Note
When this submenu is activated, the selection
bar will mark the last setting selected.
Selecting the “Map type” menu field
•Mark and confirm the “Map type” menu field.
•Mark and confirm the desired map type in
the following submenu.
The map type selected will then appear.
Map of location - The map section will indi-
cate the current vehicle location. There will be
no change in the scale and the alignment.
General map - Indicates the current vehicle
location and the destination.
Note
If the overview map is activated in the Autozo-
om mode, the map scale will change automat-
ically as you approach your destination. Map of destination
- Indicates the destination.
There will be no change in the scale and the
alignment.
Note
When this submenu is activated, the selection
bar will mark the last setting selected.
Selecting the “Move” menu field
Use this function to view neighbouring map
sections.
•Mark and confirm the “Move” menu field.
Following this, the cross hairs will appear on
the map.
Turn the menu knob to move the cross hairs
to the edge of the map to access the neigh-
bouring map section (see the section on
Moving the cross-hairs on page 41).

RADIO NAVIGATION SYSTEM48
NAVIGATION
Selecting the “Zoom setting” menu field
•Mark and confirm the “Zoom setting” menu
field.
The Autozoom menu will appear and the se-
lection bar will mark the “Autozoom” menu field.
•Press the menu knob to switch between a
more or less fine stage of detail.
The active mode will appear in blue and is
marked with a triangle.
The information on the distance following the
road classification indicates the map scale
used in Autozoom.
Note
The distance information provided for the indi-
vidual street classifications are fixed and can-
not be changed.
Information mode
In the “Information mode”, the current location
of your vehicle will appear in the symbol or map
display even though route guidance is not ac-
tive.
In the symbol display, the directional arrow will
point due north. Below the arrow you will see
the name of the street on which your vehicle is
travelling.
In the map display, the map for your current
location will appear in the scale selected. Here
the same settings apply as for the map display
during route guidance.

RADIO NAVIGATION SYSTEM49
NAVIGATION
Activating the “Info mode” menu field
•Mark and confirm the “Info mode” menu field
in the main navigation menu.
Following this, the symbol display will appear.
Press the menu knob to switch to the map
display.
Destination memories
Overview
Use the “Dest. memory” menu field to access
the destination memory menu directly from the
main navigation menu. The destination mem-
ories include the alphabetical memory and the
Top 10 memory .
The alphabetical memory contains all of the
destination memory entries sorted in alphabet-
ical order. In this memory bank you can store
and edit destinations and use them for desti-
nation entry.
The Top 10 memory is a special type of desti-
nation memory. In this memory bank you can
store and edit the 10 destinations you use most
frequently and select them for destination en-
try.
Short names help you to find the destination
you are looking for in the destination memory
more quickly, e.g. if you enter an address that
you can remember easily. The short name al-
ways precedes the destination name. You can
also use someone’s first name or the expres-
sion “Meeting place” as the short name.
Use the menu fields to select one of the fol-
lowing ways to store the selected destination:
Store destination in the alphabetical mem-
ory and in the Top 10 memory, page 35
Enter/change the short name in the desti-
nation memory, page 50
Edit the Top 10 memory, page 51
e.g.:
– Sort destinations, page 51
– Copy destinations from the alphabetical
memory into the Top 10 memory, page 52
Store flagged destinations, page 35
Delete destinations from the destination
memory, page 53.

RADIO NAVIGATION SYSTEM55
NAVIGATION
Important information
This system has been pre-equipped for dynam-
ic navigation. The following prerequisites must
be fulfilled before you can take advantage of
this function:
–the navigation CD must be able to support
dynamic navigation
– it must be possible for the receiver to pick
up at least one TMC station.
If you have any questions, please contact a
·koda Auto service centre.
What is dynamic navigation?
Dynamic navigation means that the system
automatically calculates and adjusts the driving
route on the basis of the traffic information re-
ceived.
This traffic information is transmitted inaudibly
by a number of different radio stations on the
TMC (Traffic Message Channel) in addition to
their regular programming.
The navigation system receives this informa-
tion via a separate TMC box and evaluates it
accordingly. If the system receives traffic in
formation that affects the calculated route, the
route will be re-calculated automatically.
Automatic traffic congestion function (for systems with dynamic navigat\
ion)
Traffic information is depicted in symbols in the
map display:
stop-and-go traffic
traffic congestion
closed road
The corresponding section of the route is
shown underlined in blue in the map display.
Before you can take advantage of dynamic
navigation, it must be possible to receive a
radio station that broadcasts traffic information
via TMC. The TMC box will automatically select
a TMC station, but you can also tune into a
different station manually. Selecting TMC stations
•Press the traffic congestion key ^^ ^^
^.
The traffic congestion menu will appear.
•Mark and confirm the “RDS station” menu
field.
A list of the TMC stations within reception range
will appear.
•Mark and confirm the desired station.

RADIO NAVIGATION SYSTEM56
NAVIGATION
In the symbol and map display, an antenna
symbol will indicate that the system is tuned
into a current TMC station.
TMCThe system is tuned into a TMC
station.
Note
This does not affect the radio station that you
are actually listening to. If the station you select-
ed is no longer within reception range, the sys-
tem will automatically tune into the nearest TMC
station.
Switching dynamic navigation on/off
•Press the traffic congestion key ^^ ^^
^.
The traffic congestion menu will appear.
•Mark and confirm the “Route option” menu
field.
The route options menu will appear.
•Mark the “Dynamisation” menu field.
•Press the menu knob to switch dynamisa-
tion on or off.
The active setting is marked in blue and with a
triangle.
The traffic congestion status is indicated in the
symbol and map display:
TMCdynamic navigation off
TMCDdynamic navigation on, route ad-
justment possible
To store the selected options permanently,
mark and confirm the “Route option” menu
field.
Notes
Once you have activated route dynamisation,
the other route options are fixed and can no
longer be changed.
Dynamisation can also be switched on or off
during active route guidance.
If the dynamisation function is switched on, the
“GALA” function is switched off, page 15.