RADIO NAVIGATION SYSTEM16
AUDIO
Station seek tuning
Automatic seek tuning
Automatic seek tuning Automatic seek tuning
Automatic seek tuning
Automatic seek tuning
Press the rocker switch
22 22
2 - seek tuning will
begin in the direction selected, stop at the first
radio station with a strong reception signal and
play it.
Manual seek tuning
Manual seek tuning Manual seek tuning
Manual seek tuning
Manual seek tuning
Use manual seek tuning to tune into stations
whose signals are not strong enough to be
picked up by automatic seek tuning.
To active this function:
•Press the rocker switch 22 22
2 for longer than
2 seconds.
You will hear a beep and “Manual” will appear
in the information field.
Radio mode
Select one of the following two methods:
•Continue to hold the rocker switch 22 22
2pressed down to start seek tuning; the frequen-
cy will change rapidly. The radio will switch to
mute. Seek tuning will stop as soon as you re-
lease the button. For fine-tuning, press the
rocker switch briefly (see next section).
•Press the rocker switch 22 22
2 briefly - the fre-
quency in the display will move up or down in
increments (FM 0.1 MHz, AM 9 kHz).
The function is deactivated when “Manual” no
longer appears in the information field.
Storing radio stations automatically
(AS function)
This function automatically saves the six RDS
stations with the best reception in any particu-
lar reception area. The stations are saved on
the station preset keys in memory bank 2. This
function is particularly useful on longer trips.
RADIO NAVIGATION SYSTEM34
NAVIGATION
Selecting supraregional destinations
This special destination is not allocated to any
previously selected destination. The choice of
destinations available depends on your current
vehicle position.
Use this function to find such destinations as
the closest motorway service centre or the clos-
est airport.
Selecting the “Supraregional destinations”
menu field
•Mark and confirm the “Suprareg. dests.”
menu field.
The list of categories will appear.
Selecting a category
•Mark and confirm the desired entry in the
category list.
The corresponding list for the category select-
ed will appear.
Note
If there are more than 14 entries on the list,
you will first see the edit menu. Enter the de-
sired name or beginning letters and access the
list.
Selecting an entry from the category list
•Mark and confirm the desired entry on the
list.
The main navigation menu will appear, the des-
tination selected will appear in the destination
field.
Now you can start route guidance (see page
44).Selecting a destination close to the
current vehicle location
This special destination is not allocated to any
previously selected destination. The choice of
destinations available depends on the imme-
diate vehicle location.
This function is useful for planning a stopover,
for example, to eat at a restaurant or to find
the closest petrol station.
Selecting the “Close to location” menu field
•Mark and confirm the “Close to location”
menu field.
The list of categories will appear.
Selecting a category
•Mark and confirm the desired entry on the
category list.
A list of destinations in the surrounding area
will appear for the category selected.
