Communication7
Operating instructions
Caution
If the telephone is taken from the adapter during a ca ll then the connection
between it and the adapter of the hands-free system is int errupted. Similarly,
the battery charging from the adapter is also interrupt ed. However, the
connection between the hands-free system and the telephone will be re-
established after a short moment thanks to the Bluetooth technology (this
must have been previously configured)
Note
•
Keeping the phone in the adapter gu arantees a better transmission
quality and also keeps the battery fully charged at all ti mes.
Fitting the adapter
The mobile phone adapter must be attached to the mounting
unit installed in the vehicle designed for this
– Slide the lock on the mobile phone adapter ⇒fig. 3 into the
guide tab of the mounting unit .
– Push the bottom part of the mobile phone adapter down t o
make it engage.
NoteTo avoid system malfunctions, ensure that the adapter u nit is properly
attached.
Fig. 3 Installing the
adapter
A2
A1
A2
Comunica ingles Seite 7 Montag, 23. Mai 2005 1: 49 13
Communication
8Mobile telephone: inserting into and extracting from the adapter
To make calls using the exterior antenna of the vehicle while
using the battery charge function, the telephone must be
connected to the adapter.
Inserting the phone
– Place the phone in the mobile phone adapter ⇒fig. 4 .
– Press the phone into the lock on the adapter.
Removing the phone
– Press the release button ⇒ fig. 5
– Lift the phone out.
WARNING
Check that the phone has engaged properly. In the event of an accident, a
phone which has not engaged correctly could be flung o ut of the adapter
unit and injure the driver or passengers.
Fig. 4 Inserting the
phone
Fig. 5 Removing the
phone
AA
Comunica ingles Seite 8 Montag, 23. Mai 2005 1: 49 13
