2005 Seat Ibiza 5D Radio System ALANA

16Alana/Alana MP3
Fader (FAD)
Sends sound to the front or rear speakers.
SSttaarrtt sseettttiinngg
Briefly press the FAD key. "FAD xxx" is displayed.
Setting is done with the main control
Abetween the following
values:
FAD R 31 FAD R F FAD F 31
All Central All
rearposition front
AAuuttoommaattiicc rreettuurrnn ttoo aavveerraaggee ppoossiittiioonn ((""FFAADD RRFF""))
Press the FAD key until you hear the confirmation signal
EEnndd sseettttiinngg::
Once the required value is set press the "FAD" key briefly again or
waitfor automatic exit after about 3 seconds.
K
Tuning settings memory
The pretune 1...5 keys allow you to register tune settings as well
as sound distribution to left/right and front/rear.
When you select the key used to register a sound setting, playback
willtake place according to the values registered.
SSeettttiinngg aanndd ssttoorriinngg iinn mmeemmoorryy
Carry out the bass, treble, balance and fader settings as described
previously. While carrying out one of these settings, hold the pretune key pressed down (for instance: 1) where you wish to register
the settings until you hear the confirmation signal.
"SOUND" willbe displayed on the screen.
The setvalueswill be stored in memory.
Fig. 13ALANA006
23
1 456PTYTPSCANA
LANAPROGSRCRDSBANDCDFLAIX FMLEARNRDS1BASSTREBFADBAL

17
A lana/Alana MP3
CCaallll uupp ooff ssttoorreedd vvaalluueess
Press on of the BAL, TREB, FAD, or BASS keys and then the pretune
key with the setting for the values you wish to call up (for instance:
3).
"SOUND 3" will be displayed on the screen.
Registered values will become the present ones.
CCaallll uupp ooff aavveerraaggee vvaalluueess
Press on of the BAL, TREB, FAD, or BASS keys and then the pretune
key 6. "LINEAR" will be displayed on the screen.
All settings are reset to their average value.
K
Overload protection
High temperatures and/or high volume may create a circuit
reaction.
During this phase, to unload the amplifiers the end stages of the
loudspeakers are disconnected.
K

18Alana/Alana MP3
Select Radio operation
Press BAND or RDS key.K
Selecttuning range
FFMM//AAMM
The "BAND" key allows you to select the "FM" and "AM" ranges.
By pressing the "BAND" key repeatedly you can switch from the
"FM1" to "FM2" and "MW" to "LW"
1)memorybases and viceversa.If you are on the FM range the screen will display indications for
the "FM1" of "FM2" memory bases; if you are on the AM range it
will display "MW" or "LW"
1)
FFMM wwiitthh RRDDSS
By pressing the "RDS" key repeatedly you can switch from the
"RDS1" memory bases to the "RDS2" and viceversa.
The RDS1 or RDS2 indications will be displayed on the screen.
K
Stereo tuning (only in FM and RDS bands)
When you are tuned into a stereo broadcasting station the “ ”
indication will be displayed on screen.
K
Fig. 14
Fig. 15
RRaaddiioo
1) According to versions
ALANA010
ALANA011 23
1 456PTYTPSCANALANAPROGCD6RDSBANDCDFLAIX FMLEARNRDS1BASSTREBFADBALCD6RDSBANDCD 23
1 456PTYTPSCANALANAPROGSRCRDSBANDCDFLAIX FMLEARNRDS1BASSTREBFADBAL

19
A lana/Alana MP3
The LEARN memory allows you to store up to 25 RDS stations
(Radio Data System). These stations can be tuned by briefly
pressing the and search keys.
This function makes sense if you are moving through a non
habitual area and you do not wish to delete the stations tuned into
the memory keys (1 to 6) you are used to listening to.
LLEEAARRNN mmeemmoorryy uussee
Press the RDS key until you hear a confirmation signal.
"LRN" willbe displayed on screen.
The tuner searches the FM band and memorizes the RDS
programmes (up to a maximum of 25) being broadcast in the area
you are currently.
Next, the set switches over to the best tuning RDS programme.Ifyou also press the TP key you will only tune in to RDS
programmes broadcasting traffic announcements.
LLEEAARRNN mmeemmoorryy ccaallll uupp
Pressone of the or keys. The screen will briefly display
"RDS SCAN".
Next you will listen to another RDS programme from the LEARN
memory.
K
Tuning into RDS programmes; LEARN memory
Fig. 16ALANA012 23
1 456PTYTPSCANALANAPROGFLAIX FMLEARNRDS1BASSTREBFADBALCD6RDSBANDCDCD6RDSBANDCD

20Alana/Alana MP3
Automatic memory for AUTOSTORE stationsRRDDSS rraannggee aauuttoossttoorree
Select the desired RDS memory base 1 or 2 by pressing the RDS
key briefly
fig. 17.
Press the "SCAN" key until you hear the confirmation signal.
"AS" will be displayed on the screen and the frequency indication
moves on.
Once it is over you will listen to the best reception programme.
The 6 most powerful stations of the selected range are
automatically registered in the pretune 1 to 6 keys.
FFMM rraannggee aauuttoossttoorree
Selectthe desired FM memory base (1 or 2) by briefly pressing the
"BAND" key
fig. 18.
Press the "SCAN" key until you hear the confirmation signal.
"AS" willbe displayed on the screen and the frequency indication
moves on.
Once it is over you will listen to the best reception programme.
The 6 most powerful stations of the selected range are
automatically registered in the pretune 1 to 6 keys.
K
Fig. 17
Fig. 18
ALANA013
ALANA01423
1 456PTYTPSCANALANAPROGFLAIX FMLEARNRDS1BASSTREBFADBALCD6RDSBANDCDCD6RDSBANDCD 23
1 456PTYTPSCANALANAPROGFLAIX FMLEARNRDS1BASSTREBFADBALCD6RDSBANDCDCD6RDSBANDCD

21
A lana/Alana MP3
FM stations Automatic Search tuning
Select the FM1 or FM2 band. The screen will display for instance:
"FM 87.50".
To start automatic search, press either or keys.
Search will stop at the next station.
Automatic search of FM bands operates at two sensitivity levels. If
during its first search on the tuning band for powerful field stations
(localstations) no station is found, the set will carry out a second
search for less powerful field stations.
MMaannuuaall ffrreeqquueennccyy ttuunniinngg
1. Select the FM1 or FM2 band.
2. Hold the or key down until you hear the signal and the
"MAN" indication and the current frequency are displayed on
the screen.
3. Tune into the frequency of your choice by pressing the or
keys.
If you press these keys briefly the tuning moves step by step
(50 KHz steps) and if you hold them pressed down the
frequencies change fast.
AAlltteerrnnaattiivvee FFrreeqquueennccyy sseelleeccttiioonn ((AAFF))
RDS FM radio stations can transmit their signal at different
frequencies. Your radio automatically chooses the strongest signalfor the selected station. If you are driving through an area with bad
coverage, each automatic retune will result in short breaks in the
audio. In order to avoid this, turn the AF function off.
TTuurrnniinngg AAFF ffuunnccttiioonn oonn//ooffff
Keep the DX/MAN key pressed until the confirmation signal
sounds. The AF function will be alternatively enabled or disabled.
The AF function status is also stored in the memory when a radio
station is stored and will be enabled again when a preset station is
selected.
K
Fig. 19ALANA015 23
1 456PTYTPSCANALANAPROGSRCRDSBANDCDFLAIX FMLEARNRDS1BASSTREBFADBAL

22Alana/Alana MP3
Tune into RDS programmes (LEARN function)
Select the RDS1 or RDS2 band.
Press the or keys until you hear the signal and "LEARN" is
displayed on screen.
Briefly press the or key to start automatic search by
tuning power.
K
Tune into RDS programmes (SEARCH function)
Select the RDS1 or RDS2 band.
Press the or keys until you hear the signal and "SEARCH"
isdisplayed on screen.
Briefly press the or key to start automatic search by order
of frequency. Search will stop at the next station.
K
Fig. 20Fig. 21ALANA016ALANA016 23
1 456PTYTPSCANA
LANAPROGFLAIX FMLEARNRDS1BASSTREBFADBALCRDSBANDCDCD6RDSBANDCD 23
1 456PTYTPSCANA
LANAPROGFLAIX FMLEARNRDS1BASSTREBFADBALCRDSBANDCDCD6RDSBANDCD

23
A lana/Alana MP3
Tune into AM stations with automatic search
Select the MW or LW1)band. The screen will display for instance:
"MW 502".
To start automatic search press the or keys. Search will
stop atthe nextstation.
K
ManualFrequencytuning
1. Select the MW or LW1)band.
2.Hold the or keys pressed until you hear the sound
signal and "MAN" is displayed on the screen as well as the
current frequency.
3. Tune into the frequency of your choice by pressing the or
keys.
Ifyou press the or keys briefly it will search step by
step (1KHzsteps) and if you hold them pressed frequencies
move fast.
K
Pretune keys 16
Select the MW, LW1), FM 1 or 2, or RDS 1 or 2 tuning range.
•Tuning into a station:
When the frequency tuned for a particular range, for instance: 1, is
already registered in a pretuning key, the relevant number for that
pretune key will be displayed on the screen.
•Storing a pretuned station in memory:
Press the key where you wish to register that station until you hear
the confirmation signal.
•Callup of a memorized programme:
Brieflypress the relevant pretune key.
Memory contents is not lost even if the set is removed from the
mains.
K
Fig. 23ALANA006Fig. 22ALANA015
1)According to versions 23
1 456PTYTPSCANALANAPROGSRCRDSBANDCDFLAIX FMLEARNRDS1BASSTREBFADBAL 23
1 456PTYTPSCANALANAPROGSRCRDSBANDCDFLAIX FMLEARNRDS1BASSTREBFADBAL