2005 Seat Alhambra window

Climate control135
Safety FirstControls and equipment Tips and Maintenance Technical Data
Partial deviation from Automatic mode
In nearly all cases the Automatic mode offers the best conditions
for the comfort of the vehicle occupants all the year round.
In isolated cases however it can be necessary to move away form
certain functions of the automatic mode by pressing various
buttons. The Climatronicstill works automatically.
The blower speed and thus the air volume at the front can be
increased or reduced with buttons
13and 14. This is shown by a
change in the number of lines in display position 1.
• By pressing button
11
– the ECON operation is switched off
– the air recirculation mode is switched off
– the windscreen and side windows can be defrosted or kept free
of misting (direct vents
4onto side windows)
– the dehumidifying and defrosting effect for the windscreen can
be increased if, for example persons with damp clothing are picked
up shortly after moving off.
• A Ai
ir
r rre
ec
ci
ir
rc
cu
ul
la
at
ti
io
on
n
for the front is selected by pressing button
12.
The symbol5appears in the display.
The air recirculation function prevents strong outside smells
entering the vehicle, for example when driving through a tunnelor
standing in a trafficjam.Air recirculation can also be selected if the vehicle is to be heated
or cooled quickly. In this mode, air is drawn in from the vehicle
interior and heated or cooled.
Smoking should be avoided when air recirculation is selected, as
the smoke drawn in from the vehicle interior deposits on the
evaporator of the Climatronic. This leads to permanent odours
when the Climatronicis in operation. These can only be eliminated
by exchanging the evaporator, which is time-consuming and
expensive.
• With buttons
15and 16the air flow can be to the upper part of
the body or into the footwell.
• The combination of buttons
11and 16can be used to direct the
air flow both to the windscreen and into the footwell.
• The combination of buttons
15and 16can be used to direct the
air flow both to the upper body and into the footwell.
• Button
23( (E
EC
CO
ON
N)
) ssw
wi
it
tc
ch
he
es
s tth
he
e cco
oo
ol
li
in
ng
g ssy
ys
st
te
em
m oof
ff
f
. In this mode,
the heating is automatically regulated (without air dehumidifying
and cooling), with the desired interior temperature being attained
as quickly as possible and maintained.
T Th
he
e aai
ir
r rre
ec
ci
ir
rc
cu
ul
la
at
ti
io
on
n mmo
od
de
e ssh
ho
ou
ul
ld
d nno
ot
t bbe
e uus
se
ed
d ffo
or
r aan
n eex
xt
te
en
nd
de
ed
d ppe
er
ri
io
od
d aas
s nno
o
f fr
re
es
sh
h aai
ir
r iis
s ddr
ra
aw
wn
n iin
n aan
nd
d tth
he
e wwi
in
nd
do
ow
ws
s cco
ou
ul
ld
d mmi
is
st
t uup
p.
.
W
WA
AR
RN
NI
IN
NG
G


Climate control142
General notes
• Ensure that the sensor on the air grille next to the display is not
covered up.
• To ensure that the Climatroniccan work properly, the air inlet in
front of the windscreen should be kept free of ice, snow and
leaves.
• The heat output depends on the coolant temperature – the full
heat output is therefore available when the engine is warm.
• Odours caused by a build-up of natural deposits in the vaporiser
can occur if the AUTO system has not been used for some time. The
cooling system should be turned on at fullblast at least once a
month – even during cold spells – to clear or to prevent the
odours.
• The stale air escapes through openings in the luggage
compartment side panels. Therefore when loading the luggage
compartment ensure that the openings are not covered.
• When the ambient temperature is high and the air very humid,
condensed water can drip off the evaporator and form a puddle
under the vehicle. This is quite normal and does not indicate a
leak.
• To prevent the windows from misting up the blower should be
running slowly when driving at low speeds. To do this select ECON
or AUTO.
K
Using Climatronic economically
In cooling operation the Climatronic compressor places demands
on the engine and therefore influences the fuel consumption. Tokeep the period switched on as short as possible, the following
points should be noted:
• If the inside temperature is very high after the car has been
parked in the sun, it is recommended to open doors or windows
briefly to enable the hot air to escape.
• The compressor should not be switched on during a journey if
the windows or sliding roof* are open.
• ECON mode should be selected if the desired interior
temperature can be attained without switching on the air
conditioner.
K
Operating faults
• If all the symbols in the display area flash for some 15 seconds
after switching the ignition on, there is a fault in the system.
Contact a Technical Service Centre.
• Should the cooling system not work at any time, either:
– the ambient temperature is below about +5 °C,
– the Climatronic compressor has switched off due to coolant
temperature being too high.
– or the fuses have blown.
Check the fuse and if necessary replace
⇒"Fuses" chapter. If the
trouble is not due to a defective fuse, have Climatronic checked.
• If the cooling output drops off, switch the Climatronic off and
have the system checked.
K

172Your vehicle and the environment
Suggestion 9. Save electricity
The alternator generates electricity while driving. The more
electricity is used, the higher the fuel consumption.
The heated rear window, extra lights, the heater fan and air
conditioning* use a large amount of energy. The heated rear
window creates a consumption of approx. one liter for every 10
hours.
For this reason, disconnect electrical consumers as soon as they
are no longer needed. The alternator generates electricity when the
engine is running.
K
Suggestion 10. Written check-up
If you wish to reduce fuel consumption keep a trip book. It is not
much work and is worth while since it allows you to detect possible
consumption variations (positive or negative) on time and
intervene, if necessary. If you detect an increase in consumption
you should examine the driving conditions since the last filling.
K

178Care and maintenance
N
No
ot
te
e
• Before going through the car wash, apart from the usual precautions
(closing windows and sliding roof).
You do not need to remove the Original roof aerial.
• If there are special fittings on the vehicle – e.g. spoilers, roof rack, two-
way radio aerial – it is best to speak to the car wash operator.
K
Washing the vehicle by hand
F Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
In the interests of environmental protection the vehicle should only be
washed in specially provided wash bays. In some districts, washing cars
elsewhere may even be forbidden.
First soften the dirt with plenty of water and rinse off as well as
possible. Then clean the car w wi
it
th
h aa sso
of
ft
t ssp
po
on
ng
ge
e,
, ggl
lo
ov
ve
e oor
r bbr
ru
us
sh
h
starting on the roof and going from top to bottom u us
si
in
ng
g oon
nl
ly
y ssl
li
ig
gh
ht
t
p pr
re
es
ss
su
ur
re
e ees
sp
pe
ec
ci
ia
al
ll
ly
y wwh
he
en
n ccl
le
ea
an
ni
in
ng
g tth
he
e hhe
ea
ad
dl
li
ig
gh
ht
t aar
re
ea
a.
.
Paint
shampoo, preferably with a neutral pH, should only be used for
very persistent dirt. Rinse the sponge or glove out thoroughly at
short intervals.
Wheels and sill panels should be cleaned last, using a different
sponge if possible.
After cleaning the vehicle, rinse thoroughly with water and leather
it off.N No
ot
te
e
•The vehicle should not be washed in strong sunshine.
•If the vehicle is rinsed with a hose, do not direct the jet of water
at the lock cylinders and the door/boot lid/tailgate shut lines –
they can freeze up in the winter.
K
Washing vehicle with high pressure cleaner
• The operating instructions for the high pressure cleaner must be
followed closely – particularly with regard to pressure and working
distance.
• Do not use a concentrated jet.
• The water temperature must not be above 60°C.
Conservation
Regular application of protection products protects the vehicle
paintwork to a large extent against the environmental influences
listed under “Washing” on the previous page and even against
light mechanical damage.
At the latest when water on the clean paint does not form small
drops and roll off, the vehicle should be protected by applying a
coat of good hard wax. Even when a wax solution is used regularly
T Ty
yr
re
es
s mmu
us
st
t nne
ev
ve
er
r bbe
e ccl
le
ea
an
ne
ed
d wwi
it
th
h aa cco
on
nc
ce
en
nt
tr
ra
at
te
ed
d jje
et
t!
! EEv
ve
en
n aat
t aa rre
el
la
at
ti
iv
ve
el
ly
y
l la
ar
rg
ge
e wwo
or
rk
ki
in
ng
g ddi
is
st
ta
an
nc
ce
e aan
nd
d aa vve
er
ry
y ssh
ho
or
rt
t ssp
pr
ra
ay
yi
in
ng
g tti
im
me
e,
, dda
am
ma
ag
ge
e cca
an
n
o oc
cc
cu
ur
r.
.
K
W WA
AR
RN
NI
IN
NG
G


179 Care and maintenance
Safety FirstControls and equipment Tips and Maintenance Technical Data
in the washing water it is advisable to protect the paint with a coat
of hard wax at least twice a year.
K
Polishing
Should only be done if paint has lost its shine and gloss cannot be
brought back with wax. If the polish used does not contain
preservative compounds, the paint must be waxed afterwards.
N No
ot
te
e
Matt painted and plastic parts should not be treated with polish or hard
wax.K
Paint damage
Small marks in the paint such as scratchesor stone damage
should be touched up immediately with paint before the metal
starts to rust.
However, should rust be found at any time it must be removed
thoroughly and then the area treated first with an anti-corrosion
primer and then the correct paint applied.
The number of the original vehicle paint is given on the data
sticker which is inside the boot in the spare wheel housing.
K
Windows
Remove snow and ice from windows and mirrors with a plastic
scraper only. To avoid scratches due to dirt on the glass, the
scraper should only be pushed in one direction and not moved to
and fro.
Traces of rubber, oil, wax
1), grease or silicone can be removed with
a window cleaning solution or a silicone remover.
The windows should also be cleaned on the inside at regular
intervals.
Do not dry the windows with the leather used for the paintwork
because traces of paint cleaner will cause streaks to appear on the
glass, which will hinder vision.
To avoid damaging the heating element wires in the rear window
do not put stickers over the wires on the inside.
K
Door, boot and window seals
The weatherstrips will remain flexible and last longer if they are
rubbed lightly with a rubber protective compound from time to
time. This will also stop the weatherstrips from freezing on in
winter.
K
Door lock cylinder
You should only use an appropriate spray, which has lubricating
and anti-corrosive qualities, to de-ice the lock cylinder.
K
1)This wax residue can only be removed with a special cleaner. Your Technical Service
Centre will provide you with more detailed information.

194Checking and refilling
C
Ca
au
ut
ti
io
on
n
Do not disconnect the vehicle battery when the ignition is on or when the
engine is running, as the electrical system (electronic components) could
otherwise be damaged.
In order to protect the casing from UV radiation, do not expose vehicle
battery to direct sunlight.
K
Location
The battery is in the engine compartment.
To start with the help of another battery
⇒"Emergency starting"
chapter.
K
Checking acid level
Please refer to the warning notes in the chapter "Engine
compartment" before starting any type of work on the engine or
the engine compartment.
The acid/electrolyte level should be checked regularly in the
following cases:
– high mileage
– in countries with a warm climate
– old battery
The battery is otherwise service-free.
The acid level should always be around the
m ma
ax
x.
.mark on the
longside of the battery. It should never be filled above the
m ma
ax
x.
.
mark nor be allowed to drop below the m
mi
in
n.
.mark.
We recommend that the electrolyte level be checked and corrected
by a Technical Service Centre.
B Ba
at
tt
te
er
ry
y wwi
it
th
h aa mma
ag
gi
ic
c eey
ye
e*
*
A round viewing window is located on the upper side of the battery
⇒arrow, fig. 162. This magic eye will change its color according to
the charge condition or the acid level of the battery.
Air bubbles can distort the true color. You should, therefore, tap
carefully on the magic eye.
If the display in the viewing window hasn no
o cco
ol
lo
or
r oor
r iis
s lli
ig
gh
ht
t yye
el
ll
lo
ow
w
,
the acid level in the battery is too low. Distilled water must be
added. We recommend that the battery be replaced if it is older
than 5 years.
We recommend that the electrolyte level be checked and corrected
by a Technical Service Centre.
KFig. 162AL0-048

196Checking and refilling
• Check acid level of the battery⇒"Battery chapter". Depending
on the technique used while charging battery acid could
vaporize.
K
If the battery is disconnected and then reconnected...
P Pl
le
ea
as
se
e nno
ot
te
e tth
he
e wwa
ar
rn
ni
in
ng
gs
s ffr
ro
om
m tth
he
e ""E
En
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t"
" cch
ha
ap
pt
te
er
r
a an
nd
d ffo
ol
ll
lo
ow
wi
in
ng
g oon
ne
es
s,
, bbe
ef
fo
or
re
e uun
nd
de
er
rg
go
oi
in
ng
g aan
ny
y wwo
or
rk
k oon
n tth
he
e een
ng
gi
in
ne
e oor
r
e en
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t.
.
After d di
is
sc
co
on
nn
ne
ec
ct
ti
in
ng
g
or charging the battery you should:
To reset the clock
⇒"Instruments" chapter.
Switch on again the automatic opening and closing of the power
windows
⇒"Electrical powered windows" chapter.
Should you have problems with the starting or idling of a petrol
engine start engine as follows: switch on ignition for approximately
30 seconds and switch off again. Start engine.
K
Change battery
Our batteries have been developed to suit their location and have
built-in safety elements. Original SEAT batteries comply with all
maintenance, performance and safety requirements for your
vehicle.
We recommend using a battery that does not require maintenance.
P Pl
le
ea
as
se
e nno
ot
te
e tth
he
e wwa
ar
rn
ni
in
ng
gs
s ffr
ro
om
m tth
he
e ""E
En
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t"
" cch
ha
ap
pt
te
er
r
a an
nd
d ffo
ol
ll
lo
ow
wi
in
ng
g oon
ne
es
s,
, bbe
ef
fo
or
re
e uun
nd
de
er
rg
go
oi
in
ng
g aan
ny
y wwo
or
rk
k oon
n tth
he
e een
ng
gi
in
ne
e oor
r
e en
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t.
.
F Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
Because of the problem of disposing of the old battery, the renewalshould
preferably done at a Technical Service Centre. Batteries contain, amongst
other things, sulphuric acid and lead and must on no account be putwith
normal household waste.
K

197 Checking and refilling
Safety FirstControls and equipment Tips and Maintenance Technical Data
W
Wi
in
nd
ds
sc
cr
re
ee
en
n wwa
as
sh
he
er
r
Location
The fluid container is on the left in the engine compartment. It
holds about 3.5 liters; in vehicles with a headlight washer system*
it holds about 6 liters.
The rear windshield* has its own container located in the engine
compartment.
K
Filling the container
You need to add a window cleaning solution with a wax remover to
the water. There are severala ap
pp
pr
ro
op
pr
ri
ia
at
te
e ppr
ro
od
du
uc
ct
ts
s,
, cco
on
nt
ta
ai
in
ni
in
ng
g
i is
so
op
pr
ro
op
pi
il
li
ic
c aal
lc
co
oh
ho
ol
l oor
r mme
et
th
hy
yl
la
at
te
ed
d ssp
pi
ir
ri
it
ts
s
with wax dissolving
properties (with anti-freeze additive in winter) on the market,
because plain water is not usually sufficient to clean the glass and
headlight lenses quickly and thoroughly. The mixing ratios on the
window cleaner packaging must be adhered to.
Even when h he
ea
at
te
ed
d wwi
in
nd
ds
sc
cr
re
ee
en
n wwa
as
sh
he
er
r jje
et
ts
s
* are fitted, a window
cleaning solution containing anti-freeze should be added to the
water in the winter.
C Ca
au
ut
ti
io
on
n
To avoid a possible error by the fluid level sensor, the proportion of alcohol
and water should be 35% alcohol and 65% water approximately.
We recommend you contact a Technical Service Centre for further advice.
Under no circumstances should you add coolant anti-freeze or other
additives.
K
Fig. 163AL0-051