2005 Seat Alhambra key

Opening and closing82
The e ef
ff
fe
ec
ct
ti
iv
ve
e rra
an
ng
ge
e
(red areas) of the remote control are shown in
the fig. 67. The maximum range depends on several factors.
The range is also reduced as the batteries wear down.
N No
ot
te
e
Duplicate, unprogrammed keys for the remote control are available at
Technical Service Centres. However, the second key must be synchronised
in a SEAT Official Service Centre, as the immobiliser code must also be
entered into the head of the key.
Up to a maximum of four keys with radio-frequency remote control maybe
used.
K
Opening and closing your vehicle
To open the car, point the key at the car, within the effective range,
and briefly press the opening button (arrow 1). To close the car,
briefly press the closing button (arrow 2).
If you press the closing button (arrow
2) twice, the safety lock and
anti-theft alarm system* are deactivated and the indicators will
briefly flash to show this.
N No
ot
te
e
While the “open” or “close” buttons are pressed, a warning lightin the key
flashes. If this does not happen, the battery in the key might be flat. In this
case a Technical Service Centre should check or change the battery.
When the safety lock and the anti-theft alarm* are activated,
proceed in the following manner:
If you open the car with the opening button of the radio-frequency*
remote control, all the locks will be blocked automatically if you do
not open any of the doors or boot/tailgate before 30 seconds have
elapsed. However, the safety lock and the anti-theft alarm* will be
deactivated during those 30 seconds. This function stops
u un
nw
wa
an
nt
te
ed
d oop
pe
en
ni
in
ng
g
of the vehicle within the effective range of the
radio-frequency* remote control.
When unlocking the vehicle, keep the key in the driver’s and
passenger’s door lock or tailgate in the unlocking position. All
windows, except for the lateral electric windows, will open
automatically.
When keeping the key in the locking position, the windows and the
roof will close automatically.
21
LEO-009Fig. 68

Opening and closing83
Safety FirstControls and equipment Tips and Maintenance Technical Data
Individual opening of the doors
O Op
pe
en
ni
in
ng
g wwi
it
th
h tth
he
e iin
nd
di
iv
vi
id
du
ua
al
l oop
pe
en
ni
in
ng
g aac
ct
ti
iv
va
at
te
ed
d
To o op
pe
en
n
the car, point the key at it within the effective range and
briefly press the opening button
⇒ fig. 68, arrow 1o
on
nc
ce
e
:
Only the driver’s door is unlocked. The safety lock and the anti-
theft alarm* are immediately deactivated, and all the indicators
flash to show this.
• If you press the opening button
⇒ fig. 68, arrow 1t
tw
wi
ic
ce
e
all the
locks are unlocked.
• The safety lock and the anti-theft alarm* remain deactivated.
N No
ot
te
e
All other individual door opening functions can be found in the "Doors,
central locking" chapter.K
Synchronisation
If the vehicle cannot be opened by pressing the radio transmitter
button, it could be that the code of the key no longer matches that
of the control unit in the vehicle. This can occur if the transmitter
button is frequently pressed outside the effective range of the
system.
The infrared key must be resynchronized. The synchronization
process must be completed with 1 1 mmi
in
nu
ut
te
e
.
The necessary steps for the programming of the key are:
1. Insert key into driver’s door lock and turn three times forwards
(unlock), before 5 seconds have elapsed (maximum). Each time
hold it for 1/2 second in the unlock position. Remove key. The
warning lamp in the inner driver’s door cover will flash to show that
the operation has been properly completed.
2. Press and hold “close” button
⇒ fig. 68, arrow 2.
3. Press “open” button
⇒ fig. 68, arrow 13 times. Release
“close” button. The key has now been recoded. To check the
system, the warning lamp in the door trim will flash, and the light
in the key will flash 5 times.
If any further infrared keys are being used, they must also be
synchronised. To do this, steps 2 to 4 of the synchronisation
procedure must be carried out. This procedure must not last any
longer than 15 seconds for each key and must be carried out
immediately after the synchronisation of the previous key.
T To
o een
ns
su
ur
re
e tth
ha
at
t nno
ob
bo
od
dy
y iis
s iin
nj
ju
ur
re
ed
d wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s oor
r
s sl
li
id
di
in
ng
g/
/t
ti
il
lt
ti
in
ng
g rro
oo
of
f,
, tth
he
e oop
pe
er
ra
at
to
or
r ssh
ho
ou
ul
ld
d aal
lw
wa
ay
ys
s wwa
at
tc
ch
h tth
he
e wwi
in
nd
do
ow
ws
s aan
nd
d
s sl
li
id
di
in
ng
g/
/t
ti
il
lt
ti
in
ng
g rro
oo
of
f aas
s tth
he
ey
y ccl
lo
os
se
e.
.
C Ca
ar
re
el
le
es
ss
s oor
r uun
nc
co
on
nt
tr
ro
ol
ll
le
ed
d ccl
lo
os
si
in
ng
g oof
f tth
he
e wwi
in
nd
do
ow
ws
s cca
an
n cca
au
us
se
e iin
nj
ju
ur
ri
ie
es
s.
.
K
W WA
AR
RN
NI
IN
NG
G


Opening and closing84
N No
ot
te
e
• The remote control key may only be synchronised when the electric
windows have been closed.
• Every time a key is synchronised all previous information is deleted, which
means that if you wish to use several remote control keys for the same car,
you must synchronise them during this this operation.
K
User License
The radio-frequency remote control complies with all approval
standards and its use has been authorised by the Federal
Approvals Office For Telecommunications Of the Federal Republic
Of Germany.
All components are marked in accordance with current standards.
This license is the base for obtaining licenses in other countries.
K
Electric windows*
The controls are in the armrest of the driver’s door ⇒ fig. 69.
1Passenger door
2Driver’s door
3Safety control*
4Right rear door*
5Left rear door*
In the passenger door and the rear doors there are also additional
switches* for the separate windows.
With the safety switch
3in the driver’s door, the rear electric
windows can be deactivated.

1
2
3
4
5
AL0-005Fig. 69

Opening and closing86
3. After the window has stopped, you must lift and hold the switch
again within 5 seconds in order to close the window.
T Th
he
e wwi
in
nd
do
ow
w wwi
il
ll
l nno
ow
w ccl
lo
os
se
e wwi
it
th
ho
ou
ut
t ppo
ow
we
er
r lli
im
mi
it
ta
at
ti
io
on
n.
.
N No
ot
te
e
If you wait for longer than 5 seconds between the individual steps, the
window will open again on switch operation.
C Cl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s wwi
it
th
ho
ou
ut
t aau
ut
to
om
ma
at
ti
ic
c ccl
lo
os
si
in
ng
g ffu
un
nc
ct
ti
io
on
n*
*
Lift the switch by the front edge until the window is completely
closed.
P Pl
le
ea
as
se
e nno
ot
te
e tth
ha
at
t tth
he
e wwi
in
nd
do
ow
w ccl
lo
os
se
es
s wwi
it
th
ho
ou
ut
t ppo
ow
we
er
r lli
im
mi
it
ta
at
ti
io
on
n.
.
Function of the electric windows with ignition switched off
After the ignition has been switched of, the windows can still be
operated for about ten minutes so long as the driver or passenger
doors are not opened.
The windows can also be closed or opened from outside on
vehicles equipped with central locking. In vehicles with a
sliding/tilting sunroof, this can only be closed. To do this the key
should be held in the locking or unlocking position in the lockof
the driver or passenger door. The windows are closed first,
followed by the sliding sunroof.
O Op
pe
en
ni
in
ng
g
Press the front edge of the respective button.
C Cl
lo
os
si
in
ng
g
Lift the front edge of the respective button.
• • TTa
ak
ke
e ggr
re
ea
at
t cca
ar
re
e wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s!
! CCl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s iin
n aa
c ca
ar
re
el
le
es
ss
s oor
r uun
nc
co
on
nt
tr
ro
ol
ll
le
ed
d mma
an
nn
ne
er
r mma
ay
y cca
au
us
se
e bbr
ru
ui
is
se
es
s,
, ees
sp
pe
ec
ci
ia
al
ll
ly
y iin
n cch
hi
il
ld
dr
re
en
n.
.
• • TTh
he
e ddr
ri
iv
ve
er
r mmu
us
st
t wwa
ar
rn
n tth
he
e oot
th
he
er
r ooc
cc
cu
up
pa
an
nt
ts
s oof
f tth
he
e rri
is
sk
k wwh
hi
ic
ch
h cca
ar
re
el
le
es
ss
s
o op
pe
er
ra
at
ti
io
on
n oof
f eel
le
ec
ct
tr
ri
ic
c wwi
in
nd
do
ow
ws
s een
nt
ta
ai
il
ls
s.
.
W
WA
AR
RN
NI
IN
NG
G
• • TTa
ak
ke
e ggr
re
ea
at
t cca
ar
re
e wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s!
! CCl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s iin
n aa
c ca
ar
re
el
le
es
ss
s oor
r uun
nc
co
on
nt
tr
ro
ol
ll
le
ed
d mma
an
nn
ne
er
r mma
ay
y cca
au
us
se
e bbr
ru
ui
is
se
es
s,
, ees
sp
pe
ec
ci
ia
al
ll
ly
y iin
n cch
hi
il
ld
dr
re
en
n.
.
• • TTh
he
e ddr
ri
iv
ve
er
r mmu
us
st
t wwa
ar
rn
n tth
he
e oot
th
he
er
r ooc
cc
cu
up
pa
an
nt
ts
s oof
f tth
he
e rri
is
sk
k wwh
hi
ic
ch
h cca
ar
re
el
le
es
ss
s
o op
pe
er
ra
at
ti
io
on
n oof
f eel
le
ec
ct
tr
ri
ic
c wwi
in
nd
do
ow
ws
s een
nt
ta
ai
il
ls
s.
.
K
W WA
AR
RN
NI
IN
NG
G


Opening and closing88
O Op
pe
en
ni
in
ng
g
Pull locking arm in direction of arrow and push outwards until the
lever catches.
C Cl
lo
os
si
in
ng
g
Pull locking arm forwards, then inwards until the lever catches.
K
Electrically operated vent wing windows*
The windows only work with the ignition switched on.
O Op
pe
en
ni
in
ng
g
Press the upper surface of the respective switch to open the
desired window.C Cl
lo
os
si
in
ng
g
Pull upper surface of the respective switch to close the desired
window.
N No
ot
te
e
The windows on vehicles with central locking can also be closed from the
outside. For this purpose, the key must be in the lock of the driver’s or
passenger doors or the tailgate and held in the locking position.
K
AL0-006Fig. 71
B Be
e cca
ar
re
ef
fu
ul
l wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
w!
!
C Ca
ar
re
el
le
es
ss
s oor
r uun
nc
co
on
nt
tr
ro
ol
ll
le
ed
d ccl
lo
os
si
in
ng
g oof
f tth
he
e wwi
in
nd
do
ow
ws
s cca
an
n cca
au
us
se
e iin
nj
ju
ur
ri
ie
es
s.
.
T Th
he
er
re
ef
fo
or
re
e wwh
he
en
n lle
ea
av
vi
in
ng
g tth
he
e vve
eh
hi
ic
cl
le
e,
, aal
lw
wa
ay
ys
s tta
ak
ke
e tth
he
e iig
gn
ni
it
ti
io
on
n kke
ey
y wwi
it
th
h yyo
ou
u.
.
W
WA
AR
RN
NI
IN
NG
G

Opening and closing89
Safety FirstControls and equipment Tips and Maintenance Technical Data
S Sl
li
id
di
in
ng
g/
/t
ti
il
lt
ti
in
ng
g rro
oo
of
f*
*
Opening and closing the opening roof
With ignition switched on, the roof can be opened and closed with
the switch.T To
o oop
pe
en
n
Press switch
1.
T To
o ccl
lo
os
se
e
Press switch
2.
T To
o tti
il
lt
t
Press button
3.
T To
o llo
ow
we
er
r
Press switch
2.
N No
ot
te
e
• If the roof is open and should be tilted, press button 3and hold until the
function is complete.
If the roof should be opened directly from the tilted position, press button
1and hold until the function is complete.
• When tilting the glass roof, the screen to prevent intensive sunlight
shining in will also open automatically with the roof. If required it can be
closed by hand when the roof is closed.
• On vehicles, the roof* can also be closed with central locking by holding
the key in the lock position when locking the vehicle.
K
Fig. 72
1
3
2
B7M-0020
C Ca
ar
re
e ssh
ho
ou
ul
ld
d bbe
e tta
ak
ke
en
n wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e rro
oo
of
f!
! CCa
ar
re
el
le
es
ss
s oor
r uun
nc
co
on
nt
tr
ro
ol
ll
le
ed
d
c cl
lo
os
si
in
ng
g oof
f tth
he
e rro
oo
of
f cco
ou
ul
ld
d cca
au
us
se
e iin
nj
ju
ur
ri
ie
es
s.
. TTh
he
er
re
ef
fo
or
re
e,
, wwh
he
en
n lle
ea
av
vi
in
ng
g tth
he
e vve
eh
hi
ic
cl
le
e
a al
lw
wa
ay
ys
s tta
ak
ke
e tth
he
e iig
gn
ni
it
ti
io
on
n kke
ey
y wwi
it
th
h yyo
ou
u.
.
W
WA
AR
RN
NI
IN
NG
G

Lights and visibility91
Safety FirstControls and equipment Tips and Maintenance Technical Data
L
Li
ig
gh
ht
ts
s aan
nd
d vvi
is
si
ib
bi
il
li
it
ty
y
S
Sw
wi
it
tc
ch
he
es
s
Switching lights on and off
L
Li
ig
gh
ht
ti
in
ng
g ssw
wi
it
tc
ch
h 1
– Switched off
– Side lights
1)
– Dipped or main beamThe headlights only work when the ignition is on. When the engine
is being started and after ignition has been switched off, the
headlights are automatically switched to side lights.
Dipping and flashing the headlights
⇒"Indicators and dipped
beam lever" chapter.
N No
ot
te
e
If lights are not switched off and the ignition key is removed, a buzzer* will
sound when the driver’s door is open.
F Fr
ro
on
nt
t ffo
og
g lli
ig
gh
ht
ts
s*
*
With lighting switch in side light or dipped/main beam position
pull switch out to first detent.
R Re
ea
ar
r ffo
og
g lli
ig
gh
ht
t*
*
• • VVe
eh
hi
ic
cl
le
es
s wwi
it
th
ho
ou
ut
t ffo
og
g lli
ig
gh
ht
ts
s
Turn lighting switch to dipped/main beam position and pull switch
out to stop.
• • VVe
eh
hi
ic
cl
le
es
s wwi
it
th
h ffo
og
g lli
ig
gh
ht
ts
s
With lighting switch in dipped/main beam position, pull switch out
to 2nd detent.
0
Fig. 75
1)In some countries, when the side lights are switched on with the ignition on, the
dipped headlights also come on with reduced intensity.
123
AL0-018


Lights and visibility96
L
Li
ig
gh
ht
ts
s
Indicators and dipped beam lever
The turn signals only work when the ignition is switched on.
Right turn signals – lever up
1
Left turn signals – lever down 2
When turn signals are working, the warning lamp flashes as well⇒
"Warning lamps" chapter.
The turn signals switch off automatically when the steering wheel
returns to its normal position.T To
o ssi
ig
gn
na
al
l aa lla
an
ne
e cch
ha
an
ng
ge
e
Move the lever up
1or down 2to the pressure point and hold in
this position – the warning lamp should flash at the same time.
H He
ea
ad
dl
li
ig
gh
ht
t ffl
la
as
sh
he
er
r
Pull the lever towards the steering wheel
3– the main beam
warning lamp will light up.
S Sh
ho
or
rt
t oor
r llo
on
ng
g bbe
ea
am
ms
s
With the long or short beam connected push the lever towards the
steering wheel
4. When main beam is on, the main beam warning
lamp will light up.
P Pa
ar
rk
ki
in
ng
g lli
ig
gh
ht
ts
s*
*
The parking lights only work when ignition is switched off.
Right parking lights – lever up
1
Left parking lights – lever down 2
If the ignition key has been removed, a buzzer* will sound when
the driver’s door is open.
N No
ot
te
e
The use of the signals and lighting described here is subject to local
regulations.K
1
24
3
TO8-016AFig. 80