2005 NISSAN 350Z stop start

DVD-ROM, a new software booklet will be pro-
vided.WHEN A GRAY ROAD OR DARK
GREEN ROAD IS DISPLAYED ON
THE MAP
When you are driving on a gray road after the
vehicle has deviated from the suggested
route during route guidance, automatic re-
routing may not start immediately.

The navigation system does not provide route
guidance for dark green roads. Therefore, if
the destination is set on a dark green road,
the enlarged map display will return to the
ordinary map screen at a point on a sug-
gested road that is near the destination. Also,
the voice guidance will stop at a point on a
suggested road that is near the destination.
Refer to “About route guidance” on page
4-24 for details.

POI information and street names near gray
roads may not be contained in the map data.2-4
How does the NISSAN Navigation System work?


04.7.6/Z33-N


Please refer to “GPS information display” on
page 11-17.Quick Stop Customer Settingskey:
Sets the user-defined [Quick Stop] POI (Point
Of Interest).
Please refer to “Quick stop customer settings”
on page 5-44.Set Average Speed for Estimated Journey Timekey:
Please refer to “Setting the average speed” on
page 4-22.Tracking On/Offkey:
You can choose whether to display the path
from the start to the current position.
Please refer to “Displaying the track” on page
11-15.
Easy Mode — when the
Short Menus
key is selectedViewkey:
Same as in Expert Mode.Headingkey:
Same as in Expert Mode.
HOW TO USE THE
DEST
BUTTON
Sets destinations (final destination and way-
points) to search for a route.
This will activate various navigational functions.
WARNING
For safety, some of the functions on the
menu will be disabled while the vehicle
is moving. To use the temporarily dis-
abled functions, park the vehicle in a
safe place and shift to P or N, and set
INV1452
INV2315
How do I operate the NISSAN Navigation System?
4-11


04.7.6/Z33-N


4. The display shows the direction and distance
from the current vehicle position to the se-
lected facility.
Select the facility name you want to set as a
destination (waypoints).5. Set route priorities, then select the
OK key. Route calculation to the destina-
tion will be started.
INFO:
If quick stop is set after the destination was set,
the system starts the route calculation to the
location as the waypoint. Five waypoints can be
registered at the same time.
QUICK STOP CUSTOMER SETTING1. Press the SETTING button.
2. Select the
Navigation key on the [SET-
TINGS] screen.
INV1573
INV1574
INV1466
5-44
How do I program a destination?


04.7.6/Z33-N