1. Press the INFO button.
2. The [MAINTENANCE INFO.] screen will be
displayed.
3. To set the maintenance information for the
Engine Oil or Oil Filter, choose an item using
the joystick and press the PUSH ENTER
button.4. The [ENGINE OIL] screen will be displayed.
5. To reset, select the
RESET key.
6. Set the distance of the maintenance sched-
ule.
To determine the maintenance interval, refer to
the vehicle’s Owner’s Manual.
To automatically display the [MAINTENANCE
INFO.] screen when setting trip distance is
reached, select theDisplay Maintenance Notification
key and press the PUSH ENTER button.
INV1756
INV1750
MAINTENANCE INFORMATION12-2
How do I use the vehicle information?
04.7.6/Z33-N
Symptom Possible cause Remedy
Although the system is set with the moving direction
as the preference, it does not find the route by
matching the preference.There is no route found in that direction. This condition is not abnormal.
Route is not indicated. There is no road that can be found by this system
close to the destination.Reset the destination closer to the road displayed in
orange. Especially with roads which have separate
lanes for opposite directions, be careful in setting the
destination or waypoints on it, because results may
differ depending on the lane you choose.
The starting point to the destination is too close. Set more distant destinations.
The system may not calculate a route if the current
vehicle location is too far away from the destination.Divide your trip by selecting one or two intermediate
destinations.
The route is not displayed continuously at waypoints,
for example, that are not calculated route from the
vehicle’s current position.Suggested routes may be displayed discontinuously
near waypoints as route calculation is done at each
waypoint.This condition is not abnormal.
The suggested route the vehicle has traveled is
erased.Suggested routes are stored in memory by the
blocks; if the vehicle travels past waypoint block 1,
the previous data will be erased.This condition is not abnormal.
ROUTE CALCULATION14-10
Troubleshooting guide
04.7.6/Z33-N