386 Technical termsCAN system
(C
ontroller A
rea N
etwork)
Data bus network serving to control ve-
hicle functions such as door locking or
windshield wiping depending on vehi-
cle settings and/or ambient condi-
tions.
Cockpit
All instruments, switches, buttons and
indicator/warning lamps in the passen-
ger compartment needed for vehicle
operation and monitoring.
Cold tire inflation pressure
(
page 278)
Control system
The control system is used to call up
vehicle information and to change
component settings. Information and
messages appear in the multifunction
display. The driver uses the buttons on
the multifunction steering wheel to
navigate through the system and to ad-
just settings.Cruise control
Driving convenience system for auto-
matically maintaining the vehicle speed
set by the driver.
Curb weight
(
page 278)
DOT
(Department o
f Transportation)
(
page 279)
Engine number
The number set by the manufacturer
and placed on the cylinder block to
uniquely identify each engine pro-
duced.
Engine oil viscosity
Measure of the internal oil friction (vis-
cosity) at different temperatures. The
higher the temperature the oil can tol-
erate without thinning too much, or the
lower the temperature it can tolerate
without thickening too much, the bet-
ter the viscosity characteristics of the
oil.ESP
(E
lectronic S
tability P
rogram)
Improves vehicle handling and direc-
tional stability.
ETD
(E
mergency Tensioning D
evice)
Device which deploys in certain frontal
and rear collisions exceeding the sys-
tem's threshold to tighten the seat
belts.
->SRS
GAWR
(G
ross A
xle W
eight R
ating)
(
page 279)
Gear range
Number of gears which are available to
the automatic transmission for shifting.
The automatic gear shifting process
can be adapted to specific operating
conditions using the gear selector le-
ver.
397 Index
E
Electric air pump 340
Electrical consumer battery 250
Electrical outlet see 12-V socket 203
Electronic Stability Program see ESP
Emergency
Opening the driver’s door 343
Opening the trunk 342
Unlocking the vehicle 342
Emergency call
911 164
Emergency call system
Initiating emergency call 210
Requirements 208
Emergency operation (Limp Home
Mode) 177
Emergency operations
Releasing trunk lid from inside 102
Emergency Tensioning Device (ETD) 72,
386
Emission control 238
Emission control information label 366Engine
Compartment 243
Power output 368
Starting 48
Technical data 368
Turning off 58
Engine malfunction indicator lamp 29
Engine number 366, 386
Engine oil 246, 377
Adding 248
Additives 377
Checking 247
Checking level 241
Consumption 246
Filler neck 247
Message in the multifunction
display 330
Viscosity 386
Engine oil temperature 29
Oil temperature symbol 301
Engine start button 31Entry/exit lights 111
ESP 79, 81, 386
Control switch 32
Messages in the multifunction
display 307
Resetting 307
Switching off 83
Switching on 84
Warning lamp 81
ETD see Emergency Tensioning Device
Express-open windows 194
Exterior lamp switch 27, 51, 105
Exterior lamps
Delayed shut-off 132
Exterior lighting
Additional turn signals 347
Exterior rear view mirrors
Adjusting 32, 43
