2005 MERCEDES-BENZ SLK-Class display

28 At a glanceMenu systemThe functions currently assigned to the
soft keys are displayed in the soft key sec-
tions 1.
Messages or settings are displayed in the
main area 2.
The settings can be changed by operating
controls accordingly.
The status bar 3 is divided into three ar-
eas.Left side:
The selected operating mode is given. In
this example: Radio
Center:
Indication of the selected operating mode.
In this example:

FM = selected waveband

1 = selected station is stored on
preset 1
Right side:
General status information is displayed, re-
gardless of the selected operating mode. In this example (
page 27):

ROAMING
= telephone* is logged into a
mobile communications network out-
side your home network.

= telephone* signal strength
Menu functions and submenus
Using the soft keys you can switch func-
tions ON or OFF or open submenus.
iA maximum of five soft keys may be
displayed on each side of the main area
2.

29 At a glance
Menu system
Example: Radio main menu:
The
Scan
soft key switches the scan
search ON or OFF.

The
Autost.
soft key opens the sub-
menu for the Autostore settings.In some situations, soft keys may not have
any function and thus not be available.
Should a soft key not be available, it will
appear shaded out, its characters will ap-
pear white.
Example:
Presets
, Scan
and
Autost.
soft key.Exiting from submenus
You can exit the current submenu by
pressing the
Back
soft key. The display
switches to the next higher menu level.
The system does not accept setting modi-
fications which have not been stored.
There are exceptions where pressing the
Back
soft key will also store new settings.
These exceptions, whenever applicable,
are referenced on the following pages.

30 At a glanceQuick reference COMAND
Switching ON
Turn the key in the steering lock to po-
sition 1 or 2,
or

Press..
COMAND switches on the last active
system and displays the corresponding
menu.Switching OFF

Turn the key in the steering lock to po-
sition 0 and remove it,
or

Press..
Different volume settings are possible for
Navigation*, Telephone*, or Voice con-
trol*.
iThe system can be operated as follows:
from COMAND itself, or

from the multifunction steering
wheel
This operating manual describes oper-
ation from COMAND and from the mul-
tifunction steering wheel.
Unless otherwise specified, the de-
scriptions and the displays illustrated
relate to the COMAND control unit.
Switching COMAND ON/OFFiWithout the key in position 1 or 2 of the
steering lock, the system automatically
switches OFF again after approx. 30
minutes of inactivity.
iIf a telephone call is in progress (hands-
free) you cannot switch the COMAND
OFF, . is disabled.Volume

32 At a glanceQuick reference COMANDA common balance setting applies to the
following operating modes:
Radio

Single CD

MP3

CD changer*

AUX

Satellite radio*When adjusting the balance, the system
automatically stores the setting for the
currently active operating mode.
Setting balance

Open the main menu of the appropriate
operating mode (
page 27).

Press the
Balance
soft key.
The Balance menu appears.

Press or :
The cursor moves horizontally, adjust-
ing the balance accordingly.
Storing new settings:

Press or the
Back
soft key,
or

wait until the display changes.
BalanceiFor Navigation* a different balance set-
ting is possible. You find the descrip-
tion under “Adjusting the acoustics for
navigation announcements”
(page 127).

34 At a glanceQuick reference COMANDStoring new settings:
Press or the
Back
soft key,
or

wait until the display changes.
If the vehicle is equipped with a sound sys-
tem*, the sound functions are available for
the following operating modes:

Radio

Single CD

MP3

CD changer*

AUX

Satellite radio*The following sound functions are avail-
able:

Default SettingsResets the sound functions* to the fac-
tory setting.

StandardNormal stereo playback.

SpeechPlayback optimized for speech compre-
hension.

LOGIC7 Surround7-channel-surround playback (not for
mono-sources like AM waveband or
Weather Band in radio mode).Different sound functions* can be activat-
ed for each one of the operating modes.
Example:
For CD mode: the
LOGIC7 Surround
function,
for Satellite radio* mode: the
Speech
func-
tion.
Switching sound functions*

Open the main menu of the appropriate
operating mode (
page 27).

Press the
Sound
soft key.
Sound functions*

42 AudioRadio operationTuning via station search
On COMAND control unit
Switch to the desired FM or AM wave-
band (
page 40).

Press- or .
The next receivable ascending frequen-
cy is tuned in and begins to play;
or

Press, or .
The next receivable descending fre-
quency is tuned in and begins to play.On multifunction steering wheel

Switch the multifunction display in the
instrument cluster to the Radio display
(page 25).

Pressj.
The next receivable ascending frequen-
cy is tuned in and begins to play;
or

Pressk.
The next receivable descending fre-
quency is tuned in and begins to play.
Tuning via station presets
Ten presets each are available for FM and
AM. The presets are accessed using the
number keypad, or via the Presets menu.Accessing via number keypad:

Switch to the desired waveband
(page 40).

Press one of the number keys
3 - ".
The system tunes to the station stored
under this number.
Accessing via Presets menu:

Switch to the desired waveband
(page 40).

Press the
Presets
soft key.
The Presets menu appears.

43 Audio
Radio operation

Use , ,  or  to choose a
preset and press;
or

Press one of the number keys
3 - ".
The system tunes to the station stored
under this number.Tuning via Autostore presets
The Autostore function allows placing of
stations into the presets sorted by recep-
tion quality (
page 48).
The system will store the station with the
strongest signal in preset 1.
Ten presets each are available for FM and
AM.

Switch to the desired waveband
(page 40).

Press the
Autost.
soft key.
The Autostore preset list appears. It
can take several seconds until all fre-
quencies are displayed.

Use , ,  or  to choose a
preset and press;
or

Press one of the number keys
3 - ".
The system tunes to the station stored
under this number.

45 Audio
Radio operation
Tuning via direct frequency input
Entry example:
98.5 MHz in FM waveband

Switch to the FM waveband
(page 40).

Press2.
The frequency input display appears.
The frequency range of the FM wave-
band is shown.

Press the number buttons in
succession:!, , and .
Each number entered appears in the
display.
The system tunes to the frequency en-
tered (in this example: 98.5 Mhz)
and
switches back to the FM menu
.
iManual tuning is also possible in all
wavebands by pressingor.
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed.
Frequency increments for manual
tuning:
FM 0.2 MHz

AM 10 kHz
iEntries outside the frequency range are
not possible.
Within the AM waveband, the input is
restricted to frequencies within the re-
spective frequency increment, which
is10 kHz.
The system will select the nearest valid
frequency if a frequency outside the
frequency increment is entered.