2005 MERCEDES-BENZ SLK-Class Comand Manual

72 AudioCD changer* operation
Press and hold the button of an empty
magazine compartment 2 for more
than 2 seconds.
The LEDs of all magazine compartment
buttons 2 briefly light up green sever-
al times.

Wait until the LED in the first magazine
compartment button 2 flashes green.
This indicates that the CD changer re-
quests a CD.

Insert an audio CD into the CD slot 1
within approx. 15 seconds. Insert the
CD face up.
The CD is pulled in; the magazine com-
partment is loaded. The red LED in the corresponding mag-
azine compartment button 2 lights up
continuously.
The CD changer then requests inser-
tion of the next CD. The LED in the cor-
responding magazine compartment
button 2 flashes green.

Repeat the last step until all six maga-
zine compartments are loaded.
The system plays the sixth CD. The
LEDs in all magazine compartment but-
tons 2 light up red continuously.
The loading procedure is completed.
iIf, for example, only compartments 1
through 4 are to be loaded instead of
all six compartments, simply do not in-
sert the a fifth CD into the slot 1. The
CD changer attempts to load the fifth
CD, yet aborts the loading procedure.
The system automatically plays the last
(fourth) CD.

73 Audio
CD changer* operation
The following options are available:
Ejecting one CD

Ejecting all CDs (
page 74)
Ejecting one CD
1CD slot
2Magazine compartment buttons

Open the glove box
(Vehicle owner's manual).

Briefly press the appropriate magazine
compartment button 2.
The button LED 2 flashes red. The CD
changer ejects the CD.

Within 15 seconds, remove the CD
from the slot 1.
The CD will be pulled in again if it is not
removed from the slot within 15 sec-
onds. The system starts playing the CD
again.
The ejection procedure is completed.
Ejecting CDs
iIf you are listening to a CD in the CD
changer and you eject another CD from
the changer:
While ejecting the CD, the system
interrupts CD playback.

The CD you were last listening to
starts from the beginning once the
ejection procedure is completed.
If you eject the CD you are currently lis-
tening to:

The next available audio CD is
played.

If there are no other CDs available,
the system switches to the audio
source listened to before CD chang-
er mode.

74 AudioCD changer* operationEjecting all CDs 
Open the glove box
(Vehicle owner's manual).

Press and hold the button of a loaded
magazine compartment 2 for more
than 2 seconds.
The button LEDs of all loaded magazine
compartments will briefly flash red,
several times.
The CD changer ejects the CDs one af-
ter another.

Within 15 seconds, remove each CD
from the slot 1.
The CD will be pulled in again if it is not
removed from the slot within 15 sec-
onds. The system starts playing the CD
again.The ejection procedure is completed when
all CDs are removed, or when the proce-
dure is aborted by the CD changer.

Open the Audio main menu
(page 38).

Press the
CDC
soft key.The CD changer main menu appears.
You will hear the CD listened to last. If
this CD is no longer available, the unit
plays the next available audio CD.
The status bar also contains:

The track number and total number
of tracks on the current CD

The elapsed playing time of the
track
CD changer main menuiThe
CDC
soft key is shaded out if no CD
is loaded. The system will not switch to
CD changer mode.

Load an audio CD into the CD
changer (
page 69).
The
CDC
soft key will only be visible if a
CD changer is connected.

75 Audio
CD changer* operation
1CD name or CD number
2Elapsed track playing time
3Track number/total tracks
4Track title or track number
The CD changer main menu shows the CD
title at the top and track title in the center
of the main area if the CD contains corre-
sponding text data.If the CD does not contain any CD text da-
ta, the number of the CD and the track
number are displayed instead of the name
of the CD and the track title.
The numbers 1 through 6 are assigned to
the CD compartments of the CD changer.
Available choices:

Selecting via CD list

Selecting via direct entry of the CD
number (
page 76)

Selecting via CD Selection menu
(page 76)Selecting via CD list
The CD list contains all loaded CDs. Only
one entry is visible at a time. Its name or
number is shown at the top of the CD
changer main menu (in this example:
CD 5).
Selecting CDs
iThis selection is possible only if at least
two audio CDs are loaded.

76 AudioCD changer* operation
Use or  to select another CD
from the list.

Wait approx. 3 seconds without chang-
ing the selection.
The CD is changed. The newly selected
CD is played.Selecting via direct entry of the CD
number

Press one of the 3 -  keys.
The CD changer switches to the CD
loaded in the appropriate CD changer
compartment.
Selecting via CD Selection menu

Press the
Magaz.
soft key.
The CD Selection menu appears. You
see the list of all six compartments. An entry shows the CD title if the CD con-
tains corresponding text data.
No text displayed with a CD symbol indi-
cates that the corresponding CD does not
contain any CD text data.
An entry shaded out indicates an empty
CD changer compartment.
iThe system will skip empty CD changer
compartments.
iThe CD fails to be changed if you select
an empty compartment.

77 Audio
CD changer* operation

Use or  to select a CD.
The system will skip empty CD
changer compartments.

Press.
The newly selected CD is played.
The following options are available:

Selecting via track skip

Selecting via track list (
page 78)

Selecting via manual entry of the track
number (
page 78)

Selecting via scan search (
page 79)Selecting via track skip
On the COMAND control unit

Open the CD changer main menu
(page 74).

Press-for forward skipping;
or

Press, for backward skipping.
The tracks skip immediately after
pressing one of the buttons.
On the multifunction steering wheel

Switch the multifunction display in the
instrument cluster to the CD changer
display (
page 25).

Pressj for forward skipping;
or

Pressk for backward skipping.
The tracks skip immediately after
pressing one of the buttons.
Selecting a track
iForward skipping:
The next track is played.
Backward skipping:
If the track has been playing longer
than approx. 10 seconds, the system
skips back to the beginning of the
track.
If less than 10 seconds have played,
the system skips back to the beginning
of the previous track.

78 AudioCD changer* operationSelecting via track list
The track list contains all tracks of the cur-
rent CD. Only one list entry is visible at a
time, it is the number of the track currently
playing.

Use or  to select another track
from the list.
The current track remains playing while
selecting.

Press, or wait approx. 3 seconds
without changing the selection.
The track is changed. The newly select-
ed track is played.
Selecting via manual entry of the track
number

Open the CD changer main menu
(page 74).

Press2.
The Manual track input display ap-
pears.1Number of tracks on the current CD
(12 tracks)
Entry example: Track 1

Press3.
Entry example: Track 12

Press3 and  in quick succession.

79 Audio
CD changer* operation

Wait approx. 3 seconds after entering
the number.
The selected track is played. The CD
main menu appears.
Selecting via scan search
Scan search is characterized as follows:

Scan search plays each track on the
current CD for approx. 8 seconds.

Scan search can be ended manually.

Scan search automatically stops at the
track listened to before the scan
search was started.Starting scan search

Press the
Scan
soft key.
Ending scan search manually

Press the
Scan
soft key.
The track playing at the time the scan
is terminated remains playing.

Open the CD changer main menu
(page 74).

Press and hold- or ,.

To stop release- or ,.
The following options are available:

Normal sequence


Repeat track

Repeat CD


Track Random


CD Random
iEntries beyond the number of available
tracks on the CD are not possible.
iWhen you start scan search, playback
option
Normal sequence
(page 80) is
activated automatically.
Therein scan search is restricted to the
current CD.
Fast forward/reverse Playback options