2005 MERCEDES-BENZ G55AMG manual transmission

Contents
Practical hints................................. 287
What to do if … .................................. 288
Lamps in instrument cluster ........ 288
Lamp in center console ................ 295
Vehicle status messages in the
multifunction display .................... 296
Where will I find...? ............................ 321
First aid kit ................................... 321
Vehicle tool kit ............................. 321
Vehicle jack.................................. 322
CD changer .................................. 322
Spare wheel ................................. 323
Unlocking/locking in an emergency .. 325
Unlocking the vehicle ................... 325
Locking the vehicle ...................... 326
Fuel filler flap ............................... 326
Manually unlocking the
transmission gear selector lever .. 327
Opening/closing in an emergency..... 328
Tilt/sliding sunroof ...................... 328Brush guard* ...................................... 329
Lowering and raising brush
guard ............................................ 330
Replacing SmartKey batteries ............ 331
SmartKey ...................................... 332
Replacing bulbs .................................. 333
Bulbs ............................................. 333
Replacing bulbs for front lamps .... 335
Replacing bulbs for rear lamps ..... 341
Replacing wiper blades....................... 344
Removing wiper blades ................. 344
Installing wiper blades .................. 345
Flat tire ............................................... 346
Preparing the vehicle .................... 346
Mounting the spare wheel ............ 347
Battery................................................ 351
Charging the battery ..................... 351
Disconnecting the battery............. 352
Reconnecting the battery.............. 353
Jump starting ...................................... 354Towing the vehicle.............................. 356
Transporting the vehicle ............... 358
Towing the vehicle - various
problem scenarios ........................ 358
Front towing eye ........................... 359
Rear towing eye ............................ 359
Freeing a stranded vehicle............ 359
Fuses.................................................. 360
Fuse box in passenger
compartment ................................ 360
Fuse box in battery box ................ 360
Fuse box in front passenger
footwell ......................................... 361
Fuse box in middle tunnel ............. 362

112 Controls in detailLightingDaytime running lamp mode
Turn exterior lamp switch to
positionM orU.
When the engine is running, the low
beam headlamps are switched on.
In low ambient light conditions, the
following lamps will switch on
additionally:

Tail and parking lamps


License plate lamps


Side marker lamps
For nighttime driving, you should turn the
exterior lamp switch to positionB to
permit activation of the high beam head-
lamps.Canada only:
The daytime running lamp mode is manda-
tory and therefore in a constant mode.
Vehicles with automatic transmission*:
When the engine is running, and you shift
from a driving position to positionN orP,
the low beam headlamps will switch off
with a three-minute delay.
When the engine is running, and you


turn the exterior lamp switch to
positionC, the parking lamps
switch on additionally.


turn the exterior lamp switch to
positionB, the manual headlamp
mode has priority over the daytime run-
ning lamp mode.
The corresponding exterior lamps
switch on (
page 110).USA only:
By default, the daytime running lamp mode
is deactivated. Activate the daytime run-
ning lamp mode using the control system,
see “Setting daytime running lamp mode”
(
page 137).
When the engine is running, and you turn
the exterior lamp switch to
positionCorB, the manual head-
lamp mode has priority over the daytime
running lamp mode.
The corresponding exterior lamps switch
on (page 110).
iWith the daytime running lamp mode
and the exterior lamp switch in
positionM you cannot switch on the
high beam headlamps.
The high beam flasher is available at all
times.

148 Controls in detailAutomatic transmissionFor more information on driving with an au-
tomatic transmission, see the “Getting
started” section (
page 49).
Your vehicle’s transmission adapts its gear
shifting process to your individual driving
style by continually adjusting the shift
points up or down. These shift point adjust-
ments are performed based on current op-
erating and driving conditions.
If the operating conditions change, the au-
tomatic transmission reacts by adjusting
its gear shift program.The automatic transmission selects indi-
vidual gears automatically, dependent
upon


the gear selector lever positionD with
gear ranges4, 3, 2, 1 (
page 150)


transfer case position (HIGH or LOW)


the position of the accelerator pedal
(page 153)


the vehicle speed
The current gear selector lever position
and the transfer case position (HIGH or
LOW) appear in the multifunction display.
1Transfer case display
2Gear selector lever position/gear
range When the gear selector lever is in
positionD, you can influence transmission
shifting by


limiting the gear range


changing gears manually
iDuring the brief warm-up, transmission
upshifting is delayed. This allows the
catalytic converter to heat up more
quickly to operating temperature.
Warning!
G
It is dangerous to shift the gear selector
lever out ofP orN if the engine speed is
higher than idle speed. If your foot is not
firmly on the brake pedal, the vehicle could
accelerate quickly forward or reverse. You
could lose control of the vehicle and hit
someone or something. Only shift into gear
when the engine is idling normally and when
your right foot is firmly on the brake pedal.

149 Controls in detail
Automatic transmission
One-touch gearshifting
Even with an automatic transmission, you
can change the gears manually when the
gear selector lever is in positionD.
Downshifting
Briefly press the gear selector lever to
the left in the D–direction.
The transmission will shift from the current
gear to the next lower gear. This action si-
multaneously limits the gear range of the
transmission (
page 150).Upshifting

Briefly press the gear selector lever to
the right in the D+direction.
The transmission will shift from the current
gear to the next higher gear as permitted
by the shift program. This action simulta-
neously extends the gear range of the
transmission.
Warning!
G
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced vehi-
cle control. Your vehicle’s ABS will not pre-
vent this type of loss of control.iTo avoid overrevving the engine when
the gear selector lever is moved to the
D- direction, the transmission will not
shift to a lower gear if the engine’s
max. speed would be exceeded.

209 Controls in detail
Useful features
Step 7:
To program the remaining two buttons,
repeat the steps above starting with
step 3.
Rolling code programming
To train a garage door opener (or other roll-
ing code devices) with the rolling code fea-
ture, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:

Locate “training” button on the garage
door opener motor head unit. Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the “train-
ing” button may also be referred to as
“learn”or “smart” button. If there is dif-
ficulty locating the transmitting button,
refer to the garage door opener opera-
tor’s manual.
Step 9:

Press “training” button on the garage
door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing step.
Step 10:

Firmly press, hold for two seconds and
release the programmed integrated
signal transmitter button (2, 3
or4).
Step 11:

Press, hold for two seconds and re-
lease same button a second time to
complete the training process.Some garage door openers (or other rolling
code equipped devices) may require you to
perform this procedure a third time to
complete the training.
Step 12:

Confirm the garage door operation by
pressing the programmed integrated
signal transmitter button (2, 3
or4).
Step 13:

To program the remaining two buttons,
repeat the steps above starting with
step 3.
Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the inte-
grated signal transmitter to pick up the sig-
nal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
iIf the indicator lamp1 blinks rapidly
for about two seconds and then turns
to a constant light, continue with pro-
gramming steps 8 through 12 as your
garage door opener may be equipped
with the “rolling code” feature.

327 Practical hints
Unlocking/locking in an emergency
3Release strap
Pull strap 3 upwards.
The fuel filler flap is unlocked and can
be opened. Manually unlocking the transmission
gear selector lever
In the case of power failure the transmis-
sion gear selector lever can be manually
unlocked, e.g. to tow the vehicle.
1Pin

Insert a pin1, e.g. ball point pen, into
the covered opening.

Perform the following two steps simul-
taneously:
Push pin1 down.

Move gear selector lever from
positionP.

Remove pin1.
The cover returns to its closed position af-
ter moving the gear selector lever to posi-
tions D+ and D-.iThe gear selector lever is locked again
when moving it to positionP.

357 Practical hints
Towing the vehicle
Warning!
G
With the engine not running, there is no
power assistance for the brake and steering
systems. In this case, it is important to keep
in mind that a considerably higher degree of
effort is necessary to brake and steer the ve-
hicle. Adapt your driving accordingly.iThe gear selector lever will remain
locked in positionP and the SmartKey
will not turn in the starter switch if the
battery is disconnected or discharged.
For more information, see “Battery”
(page 351) and “Jump starting”
(page 354).
For information on manually unlocking
transmission gear selector lever, see
(page 327).
iTo signal turns while being towed with
hazard warning flasher in use, turn
SmartKey in starter switch to
position2 and activate combination
switch for left or right turn signal in
usual manner – only the selected turn
signal will operate.
Upon canceling the turn signal, the
hazard warning flasher will operate
again.
!When towing the vehicle with all wheels
on the ground, note the following:
With the automatic central locking acti-
vated and the SmartKey in starter
switch position2, the vehicle doors
lock if the wheels are turning at vehicle
speeds of approx. 9 mph (15 km/h) or
more.
To prevent the vehicle doors from lock-
ing, deactivate the automatic central
locking (
page 141).
Towing of the vehicle should only be
done using the towing eye. Never at-
tach tow cable, tow rope or tow rod to
vehicle chassis, frame or suspension
parts.

388 IndexAlarm system
Anti-theft 88
Anticorrosion/antifreeze 379
Antilock brake system (ABS) 381
Anti-theft alarm system
Arming 88
Canceling alarm 89
Disarming 89
Anti-theft systems 88
Anti-theft alarm system 88
Tow-away alarm 89
Aquaplaning see Hydroplaning
Armrest
Storage compartment below 191
Storage compartment in front of 191
Ashtrays 194
Aspect ratio 271
At the gas station 235
ATF (automatic transmission fluid) 244
AUDIO menu 128
Selecting radio station 129
Auto-dimming for rear view mirror 160
Automatic central locking
Activating/deactivating (control
system) 141Automatic climate control
Deactivating 170
Automatic headlamp mode 111
Automatic locking when driving 98
Automatic transmission 148
Accelerator position 153
Emergency operation (Limp Home
Mode) 153
Fluid level 244
Gear ranges 150
Gear selector lever position 148, 151
Gear shifting malfunctions 153
Kickdown 153
Manual shifting 149
One-touch gearshifting 149
Transmission fluid 244B
BabySmart
TM
Airbag deactivation system 74, 381
Compatible child seats 74, 381
Self-test 75
Backup lamps 334
Bulbs 334
Replacing bulbs 342
Bar 271
BAS 80, 82, 381
Messages in display 298
Batteries
SmartKey (replacing) 331
Batteries, SmartKey
Check lamp 95
Checking 95
Battery box
Fuse box in 360
Battery discharged
Jump starting 354
Battery, vehicle 247, 351
Charging 351
Disconnecting 352
Messages in display 302, 303
Reconnecting 353