2005 MERCEDES-BENZ E WAGON garage door opener

ContentsDriving systems ................................. 228
Cruise control............................... 228
Distronic*..................................... 232
Airmatic DC (Dual Control)* ......... 244
Loading .............................................. 247
Split rear bench seat .................... 247
Expanding the cargo
compartment................................ 249
Loading instructions ..................... 250
Cargo tie-down rings .................... 251
Cargo management system*
(Canada only) ............................... 252
Storage box in cargo
compartment (Canada only) ......... 255
Twin roller blind ............................ 256
Useful features .................................. 259
Storage compartments................. 259
Cup holders .................................. 262
Ashtrays ....................................... 265
Cigarette lighter ........................... 266
12-V socket* ................................ 266
Heated steering wheel* ............... 267
Floormats ..................................... 268
Telephone*................................... 268
Tele Aid* ...................................... 269
Garage door opener ..................... 277
Operation......................................... 283
The first 1000 miles (1500 km) ......... 284
Driving instructions............................ 285
Drive sensibly – save fuel ............. 285
Drinking and driving ..................... 285
Pedals .......................................... 285
Power assistance ......................... 286
Brakes .......................................... 286
Driving off .................................... 288
Parking ......................................... 288
Tires ............................................. 288
Hydroplaning ................................ 289
Tire traction.................................. 290
Tire speed rating .......................... 290
Winter driving instructions ........... 291
Standing water ............................. 292
Passenger compartment .............. 293
Driving abroad.............................. 293
Control and operation of radio
transmitter ................................... 293
Catalytic converter ....................... 294
Emission control .......................... 294
Coolant temperature .................... 295At the gas station .............................. 296
Refueling ...................................... 296
Check regularly and before a
long trip ....................................... 297
Engine compartment ......................... 299
Hood ............................................ 299
Engine oil ..................................... 300
Transmission fluid level ................ 303
Coolant level ................................ 303
Battery ......................................... 305
Windshield washer system and
headlamp cleaning system*......... 306
Tires and wheels................................ 307
Important guidelines .................... 307
Tire care and maintenance........... 308
Direction of rotation..................... 310
Loading the vehicle ...................... 310
Recommended tire inflation
pressure ....................................... 316
Checking tire inflation pressure ... 318
Tire labeling ................................. 323
Load identification ....................... 327
DOT, Tire Identification Number
(TIN) ............................................. 327
Maximum tire load ....................... 329
Maximum tire inflation pressure .. 329

29 At a glance
Overhead control panel
Overhead control panel
Item
Page
1
Rear interior lighting
on/off
149
2
Automatic interior lighting
147
3
Front interior lighting
on/off
147
4
Temperature sensor
5
Right reading lamp on/off
148
6
Tilt/sliding sunroof*
225
Item
Page
7
Tele Aid (emergency call
system) button
269
8
Rear view mirror
191
9
Reading lamps
147
a
Garage door opener
277
b
Tow-away alarm button
99
c
Ambient lighting
173
d
Interior lighting
e
Left reading lamp on/off
148

277 Controls in detail
Useful features
Stolen Vehicle Recovery services
In the event your vehicle was stolen:
Report the incident to the police.
The police will issue a numbered inci-
dent report.

Pass this number on to the
Mercedes-Benz Response Center along
with your password issued to you when
you subscribed to the service.
The Response Center will then attempt
to covertly contact the vehicle’s
Tele Aid system. Once the vehicle is lo-
cated, the Response Center will con-
tact the local law enforcement and you.
The vehicle’s location will only be pro-
vided to law enforcement.
Garage door opener
The built-in remote control is capable of
operating up to three separately controlled
devices, for example garage door openers,
gate openers, or other devices compatible
with HomeLink
® or some other systems.
You can program the signal transmitter
buttons.
123Signal transmitter button
4Indicator lamp
5Hand-held transmitter button
6Hand-held remote control trans-
mitter (not part of the vehicle
equipment)
iThe remote door unlock feature is avail-
able if the relevant cellular phone net-
work is available.
The SOS button will flash and the mes-
sage
Call connected
w i l l a p p e a r i n t h e
multifunction display to indicate re-
ceipt of the door unlock command.
Once the vehicle is unlocked, a Re-
sponse Center specialist will attempt
to establish voice contact with the ve-
hicle occupants.
If the tailgate recessed handle was
pulled for more than 20 seconds be-
fore door unlock authorization was re-
ceived by the Response Center, you
must wait 15 minutes before pulling
the tailgate recessed handle again.
iWhen the anti-theft alarm or the
tow-away alarm stays on for more than
30 seconds, call is initiated automati-
cally to the Response Center. See an-
ti-theft alarm system (
page 98) and
tow-away alarm (
page 99).

278 Controls in detailUseful featuresWarning!
G
Before programming the integrated remote
control to a garage door opener or gate op-
erator, make sure that people and objects
are out of the way of the device to prevent
potential harm or damage. When program-
ming a garage door opener, the door moves
up or down. When programming a gate oper-
ator, the gate opens or closes.
Do not use the integrated remote control
with any garage door opener that lacks safe-
ty stop and reverse features as required by
U.S. federal safety standards (this includes
any garage door opener model manufac-
tured before April 1, 1982). A garage door
that cannot detect an object - signaling the
door to stop and reverse - does not meet
current U.S. federal safety standards.
iCertain types of garage door openers
are incompatible with the integrated
opener. If you should experience diffi-
culties with programming the transmit-
ter, contact an authorized
Mercedes-Benz Center, or call
Mercedes-Benz Customer Assistance
Center (in the USA only) at
1-800-FOR-MERCedes, or Customer
Service (in Canada) at
1-800-387-0100.
iUSA only:
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any inter-
ference received, including interfer-
ence that may cause undesired
operation.
Any unauthorized modification to this
device could void the user’s authority
to operate the equipment.

280 Controls in detailUseful featuresStep 5:
When the indicator lamp4 flashes
rapidly, release both buttons.
Step 6:

Press and hold the just-trained inte-
grated signal transmitter button and
observe the indicator lamp4.
If the indicator lamp4 stays on con-
stantly, programming is complete and
your device should activate when the
integrated signal transmitter button is
pressed and released.Step 7:

To program the remaining two buttons,
repeat the steps above starting with
step 3.Rolling code programming
To train a garage door opener (or other roll-
ing code devices) with the rolling code fea-
ture, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:

Locate “training” button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the “train-
ing” button may also be referred to as
“learn”or “smart” button. If there is dif-
ficulty locating the transmitting button,
refer to the garage door opener opera-
tor’s manual.
iThe indicator lamp4 flashes the first
time the signal transmitter button is
programmed. If this button has already
been programmed, the indicator lamp
will only start flashing after 20 sec-
onds.
iIf the indicator lamp4 blinks rapidly
for about two seconds and then turns
to a constant light, continue with pro-
gramming steps 8 through 12 as your
garage door opener may be equipped
with the “rolling code” feature.


281 Controls in detail
Useful features
Step 9:
Press “training” button on the garage
door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing step.
Step 10:

Firmly press, hold for two seconds and
release the programmed integrated
signal transmitter button (1, 2
or3).
Step 11:

Press, hold for two seconds and re-
lease same button a second time to
complete the training process.
Some garage door openers (or other rolling
code equipped devices) may require you to
perform this procedure a third time to
complete the training.Step 12:

Confirm the garage door operation by
pressing the programmed integrated
signal transmitter button (1, 2
or3).
Step 13:

To program the remaining two buttons,
repeat the steps above starting with
step 3.
Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the inte-
grated signal transmitter to pick up the sig-
nal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner. If you live in Canada or if you are having dif-
ficulties programming a gate operator (re-
gardless of where you live) by using the
programming procedures, replace step 4
with the following:
Step 4:

Continue to press and hold the inte-
grated signal transmitter button (1,
2 or3) while you press and re-press
(“cycle”) your hand-held remote con-
trol transmitter6 every two seconds
until the frequency signal has been
learned. Upon successful training, the
indicator lamp4 will flash slowly and
then rapidly after several seconds.

Proceed with programming step 5 and
step 6 to complete.

473 Index
Fuels, coolants, lubricants etc. 450
Functions (control system) 157
Resetting 163
Fuse box
Passenger compartment 435
Fuse box in cargo compartment 435
Fuse chart 434
Fuses 434
Fuse chart 434
Fuse extractor 434
Spare fuses 434
G
Garage door opener 29, 277
Erasing the integrated remote
control 282
Integrated remote control 279
Rolling code programming 280
Gasoline see Fuel 297
GAWR 333
Gear range 461
Automatic transmission 186
Limiting 186
Shifting into optimal 185
Gear range limit
Canceling 185Gear selector lever
Position 187
Global
Locking 104
Locking with KEYLESS-GO* 110
Unlocking 104
Unlocking with KEYLESS-GO* 110
Global Positioning System (GPS) 461
Glove box 259
Closing 259
Opening 259
Good visibility 191
GPS 461
GPS see COMAND 270
Gross Axle Weight Rating see GAWR
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GVW 333
GVWR 333
H
Hand-held transmitter
Programming integrated remote
control 279
Reprogramming integrated remote
control 282Hazard warning flasher 146
Switching off 146
Switching on 146
Headlamps
Automatic control 142
Bi-Xenon* 459
Cleaning system* 191
Switching off 57
Switching on 51
Heated seats* 132
Heated steering wheel* 267
Height adjustment
Head restraints 40, 128
Steering wheel 40
Vehicle level 245
High beam flasher 145
High beam headlamps 51
Activating 145
Messages in display 387
Replacing bulbs 411
Switching on 145
Hood 299
Closing 299
Message in display 384
Opening 299
Hydroplaning 289

478 IndexOpening the tailgate from the inside with
handle 116
Operating
CD player 159
Radio 158
Safety 16
Telephone* 179
Vehicle outside the USA and
Canada 13
Operating safety 16
Operation
Garage door opener 282
Integrated remote control 282
Operator’s Manual 10
Ornamental moldings 347
Outer seats
Rear seat head restraints 129
Outside temperature indicator 152
Overhead control panel 29
Garage door opener 277
Overspeed range 462
P
Paintwork 346
Panic alarm 86
Panic button on SmartKey 86Parcel net in front passenger
footwell 259
Parking 56
Parking brake 49, 56
Engaging 56
Message in display 376
Releasing 49
Parking lamps 411
Switching on 141
Parking position
Exterior rear view mirrors 140, 176,
192
Parts service 438
PASS AIR BAG OFF indicator lamp 360
Passenger compartment
Fuse box 435
Interior lighting 147
Interior rear view mirror 42
Passenger safety see Occupant
safety 62
Pedals 285
Phone book*
Loading 181
Quick search 181Phone number*
Dialing 181
Redialing 181
Plastic and rubber parts
Cleaning 350
Pliers, universal (vehicle tool kit) 403
Poly-V-belt drive 462
Positions (Memory function)
Recalling from memory 139
Positions (Memory function*)
Storing in memory 139
Potential problems associated with under-
inflated and overinflated tires 322
Power assistance 286
Power seat
Adjusting backrest tilt 39
Adjusting head restraint height 40
Adjusting head restraint tilt 40
Adjusting seat cushion tilt 39
Adjusting seat height 39
Memory function 138
Removing/installing head
restraints 126
Seat fore and aft adjustment 39