2005 MERCEDES-BENZ CL-Class light

141 Navigation
Route guidance
Important map symbols:
Current vehicle location and direction
of travel y
If the map orientation
2D Heading Up
(page 153) is chosen, the arrow will
always point upward.

The remaining route section is
highlighted in blue color.
Display example 2:On the right side of the display, the symbol
for the next driving maneuver is indicated
(here: right turn).
On the very right side next to turn symbol
is the distance bar. It indicates the
distance to the next driving maneuver
(here: 300 ft).
The status bar shows the name of the
street after the driving maneuver, if
available, here:
PARK AVE
The destination is marked with a flag $ on
the map, an intermediate destination is
marked with a flag showing the letter
S.
Altering the map scale
The current map scale is indicated on the
left side of the status bar.

Press any soft key.
The soft key displays appear.
iThe colored highlight only appears
when the system has completed the
route calculation.
iUsing the multifunction steering wheel
buttons, the display unit can be
changed between km or miles (see
your vehicle’s Operator’s Manual). 
When the display unit is set to
miles, the COMAND will indicate
distances in miles (mi) or feet (ft).

When the display unit is set to km,
the COMAND will indicate
distances in kilometers (km) or
meters (m).
iIf no other action is taken within
approx. 8 seconds, the soft key
displays will disappear again.

175 Service
SMS (Mail)

Use g or G to select
Cell
, Work
or
Home
.

Press E.
If the address book entry does not con-
tain a phone number of the previously
selected number type, then the system
will add the number to the entry and
the message
Data Has Been Saved

is displayed and the Sender display will
appear.
If the address book entry already
contains a phone number of the
previously selected number type, the
inquiry
Do you want to Overwrite
Entry? will appear.Overwriting an entry:

Press E.
The system overwrites the existing
number and the message
Data
Has Been Saved
is displayed and
the Sender display is displayed
again.
If you do not wish to overwrite the entry

Use h to select
No
.

Press E.
The Sender display is displayed
again.

In the SMS Inbox Folder (
page 169),
use g or G to select a message.

Press the
Delete
soft key.
The Delete dialog will appear.

Press E to confirm with
Yes
.
The message is deleted.
If you do not wish to delete the message

Press h to highlight
No
and then
press E.
or

Press the
Back
soft key.
The SMS Inbox Folder will appear and
the sender is still marked.
Deleting a SMS message*

199 System settings
System settings

In the System menu, press the
Time
soft key.
The Date/Time menu for setting date
and time will appear.
Country
soft key:
Can only be selected if you use the GPS.
You can select the country (
page 200).

Press H or h to select day, month
or year.

Press g or G.
Depending on the selection, you set
the day, the month or the year.

Press the
Back
soft key.
or

Press E.
The setting is saved.
Setting the time

In the System settings menu, press the Time
soft key.

Press H or h to select hours or
minutes.

Press g or G.
Depending on the selection, you set
the hour or the minute.Setting the hour:
Each time the button is pressed, the
time is adjusted in increments of
1hour.
Setting the minute:

With GPS reception:
Each time the button is pressed, the
time is adjusted in increments of
30 minutes.

Without GPS reception:
Each time the button is pressed, the
time is adjusted in increments of
1minute.

Press the
Back
soft key.
or

Press E.
The setting is saved.iTime settings are not automatically
changed to daylight saving time.
Change the clock manually.

200 System settingsSystem settingsSetting date and time format
Press the
Format
soft key.
The Format menu for selecting the time
and date display formats will appear.

Press g or G to select a format for
date and time.

Press E.
The format setting is applied.

Press the
Back
soft key.
or

Wait a few seconds.
The Date/Time menu will automatically
appear.
Selecting the country
You can only use this function if you use
the GPS.

Press the
Country
soft key.
The country list will appear.

Press g or G to select a country.
If a country has multiple time zones,
e.g. Canada and USA, you can select
the applicable time zone and, if
applicable, daylight saving time
settings.

Press E.
The settings are applied.
Option
Symbol
Format selected
_
Format not selected
-

202 System settingsSystem settingsAdjusting the display brightness 
In the Display menu, press the Bright.
soft key.

Press h or H to adjust the
brightness.
or

Press the
Bright
. soft key longer than
2 seconds.
The display brightness changes
gradually.

Release the
Bright.
soft key.

Press the
Back
soft key.
or

Press E.
The brightness setting is applied.
Setting the display dimming
characteristics

In the Display menu, press the
Mode
soft key.

Press G or g to select an entry.Day ModeThe display is continuously set to
daylight design.Night ModeThe display is continuously set to night-
time design.AutomaticThe display changes depending on the
ambient light sensor in the vehicle.

Press E.
The setting is applied. The System
settings menu will appear.