Page 185 of 442

183 Controls in detail
Audio system
Audio system
Audio and telephone, operation
These instructions are intended to help
you become familiar with your
Mercedes-Benz audio system. They con-
tain useful tips and a detailed description
of the user functions.
Operating safety
Warning!
G
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings with the vehicle at a
standstill and operate the system only when
road and traffic conditions permit. Always
pay full attention to traffic conditions first
before operating system controls while
driving.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car is
covering a distance of 44 feet
(approximately 14 m) every second.
Warning!
G
Any alterations made to electronic
components can cause malfunctions.
The radio, amplifier, CD changer*, satellite
radio*, telephone* and voice control
system* are interconnected. When one of
the components is not operational or has
not been removed/replaced properly, the
function of other components may be
impaired.
This condition might seriously impair the
operating safety of your vehicle.
We recommend that you have any service
work on electronic components carried out
by an authorized Mercedes-Benz Center.
Page 186 of 442
184 Controls in detailAudio systemOperating and display elements
Page 187 of 442
185 Controls in detail
Audio system
Item
Page
1
CD changer mode selector
AUX mode selector
201
191
2
Single CD mode selector
203
3
Radio mode selector
4
Mute function (radio)
195
Pause (CD)
207
5
Volume distribution
189
6
Sound settings
187
7
Display
8
Alphanumeric keypad
Item
Page
9
Speed dialing memory
(telephone) in descending
order
a
Accepting a call
(telephone)
213
b
Telephone mode selector
208
c
Speed dialing memory
(telephone) in ascending
order
209
d
Terminating a call
(telephone)
213
e
CD slot
f
CD ejection
203
Item
Page
g
Soft keys
186
h
Volume
187
j
Switching on/off
186
k
Manual tuning / seek
tuning (radio)
193
Track search, reverse (CD)
206
l
Manual tuning / seek
tuning (radio)
193
Track search,
fast forward (CD)
206
Page 188 of 442
186 Controls in detailAudio systemButton and soft key operation
In these instructions, the alphanumeric
keypad (right side of radio panel) and the
function buttons (left side of radio panel)
are referred to as “buttons”. The four keys
below the display panel are referred to as
“soft keys”.
Operation
Switching the unit on/off
Switching on
Turn the SmartKey in the starter switch
to position1 or2.
If the audio system was on as you
removed the SmartKey from the starter
switch, the audio system will
automatically come back on as you
turn the SmartKey to position1 or2.
or
Press M button.
!Do not press directly in the display
face. Otherwise, the display will be
damaged.
iIf the radio is switched on without the
key in the starter switch, it will
automatically switch off again after
approx. 30 minutes.
If your vehicle is equipped with a
telephone, the display may prompt you
to enter your PIN (GSM network) or
code (TDMA or CDMA network).
Page 189 of 442

187 Controls in detail
Audio system
Switching off
Remove SmartKey from starter switch.
or
Press M button.
Adjusting the volume
Turn rotary control of N button.
The volume will increase or decrease
depending on the direction turned.Adjusting sound functions
The bass and treble functions are called up
by pressing the O button.
Settings for bass and treble are stored
separately for the AM and FM wavebands,
weather band, CD mode and telephone
mode.
Bass
Press O button repeatedly until BASS
appears in the display.
Press
+ or
– soft key to increase or
decrease tone level accordingly.
or
Press
RES
soft key briefly to reset bass
tones to their center level.
The radio switches back to the
standard radio menu eight seconds
after the last soft key is pressed.
iShould excessively high temperatures
occur while the audio system is being
operated, the display will dim. If tem-
peratures continue to rise,
HIGH TEMP
will appear in the display, after which
the audio system will be switched off
for a cooling-down period.
iIf your vehicle equipment includes a
Mercedes-Benz specified mobile
telephone*, you can adjust its volume
separately from the volume of the
audio system while the telephone is
being used.
Page 190 of 442

188 Controls in detailAudio systemAdjusting treble
Press O button repeatedly until TREBLE
appears in the display.
Press
+ or
– soft key to increase or
decrease tone level accordingly.
or
Press
RES
soft key briefly to reset treble
tones to their center level.
The radio switches back to the
standard radio menu eight seconds
after the last soft key is pressed.Sound system*
You can either program the sound settings
manually (
page 187) or choose settings
via preset sound characteristics.
You can select from among the following
settings:
STANDARD
: conventional stereo sound.
SURROUND
: the sound is set for better
three-dimensional acoustic character-
istics.
SPEECH
: the sound is optimized for the
spoken word.
Press O button repeatedly until STANDARD
, SURROUND
or
SPEECH
appears
in the display.
Press X or Y soft key repeatedly
until the desired sound setting has
been reached.
The sound is set accordingly.
or
Press
RES
soft key briefly.
The sound setting is reset depending
on the sound source activated.
Radio mode:
STANDARD
CD/AUX mode:
SURROUND
Telephone:
SPEECH
The radio switches back to the
standard radio menu eight seconds
after the last soft key is pressed.
Page 191 of 442

189 Controls in detail
Audio system
Returning sound functions to factory
settings
Press O button to call up settings
menu in the display.
Press
RES
soft key briefly; the respec-
tive sound function is reset to its center
level.
or
Press and hold
RES
soft key until
RESET
appears in the display.
The sound settings for bass and treble
are returned to their center level and
the volume is set to a predefined level.Vehicles with sound system*:
The sound setting is reset depending
on the sound source activated.
Radio mode:
STANDARD
CD/AUX mode:
SURROUND
Telephone:
SPEECH
The radio switches back to the
standard radio menu four seconds
after the last soft key is pressed.
Adjusting volume distribution
Call up fader and balance functions by
pressing the P button.
Fader
Press P button repeatedly until FADER
appears in the display.
Press V or W soft key.
The volume is distributed accordingly
between the front and rear of the
vehicle.
or
Press
RES
soft key briefly.
The fader is reset to its center level.
The radio switches back to the
standard radio menu eight seconds
after the last soft key is pressed.
Page 192 of 442

190 Controls in detailAudio systemAdjusting balance
Press P button repeatedly until BALANCE
appears in the display.
Press X or Y soft key.
The volume is distributed between the
left and right sides of the vehicle.
or
Press
RES
soft key briefly.
The balance is reset to its center level.
The radio switches back to the
standard radio menu eight seconds
after the last button is pressed.Returning volume distribution to
factory settings
Press P button to call up settings
menu in the display.
Press
RES
soft key briefly; the
respective volume distribution is reset
to its center (flat) level.
or
Press and hold
RES
soft key until
RESET
appears in the display.
The volume distribution settings for
fader and balance are set to their
center level.
The radio switches back to the
standard radio menu four seconds
after the last soft key is pressed.
Telephone* muting
If your vehicle equipment includes a
Mercedes-Benz specified mobile
telephone*, you can adjust its volume
separately from the volume of the audio
system while the telephone is being used.