2005 MERCEDES-BENZ C-Class Comand Manual

157 Service
Tele Aid*
Terminating the connection
Press K.
COMAND reverts to the system last
active before Tele Aid was activated.

158 ServiceTele Aid*

159 System settings
System settings

160 System settingsSystem settings

System settings
Press C.

In the Service main menu
(page 152), press the
System
soft
key.
System settings menu
In the System settings menu you can:
select the time zone and daylight
savings time settings

select the language (
page 161)

switch verification and notification
tones on and off (
page 162)

adjust display settings (
page 163)

reset all settings to the factory settings
(page 164)You can select the applicable time zone
and daylight saving time settings.

In the System settings menu, press the Time
soft key.
The available time zones are shown.

Push the joystick to g or G to
select the time zone.

Press E.
You can now select the daylight saving
time settings.
Activating the System settings
menu
Selecting the time zone

161 System settings
System settings

Push the joystick to g or G to
select the desired entry.Daylight Savings Time
:
Changes from summer to winter time
automatically.
Standard Time
:
No time conversion is made. The
change to winter time must be made
manually.

Press E.
The System settings menu will appear.
The setting is saved.The language affects the menu text
displays and the voice output during route
guidance.

In the System settings menu
(page 160), press the
Lang.
soft
key.
The languages list will appear.
Option
Symbol
Time change selected
_
Time change not
selected
-
Selecting the language

162 System settingsSystem settingsOption
Instr. cluster setting
COMAND will use the same language as is
set in instrument cluster.
Push the joystick to g or G to
select the desired language.

Press E.
The System settings menu will appear
with the display text in the language
selected.

In the System settings menu, press the Tones
soft key.
The Tones menu will appear.

Push the joystick to g or G to
select an entry.

Press E.
The respective tones are activated or
deactivated. You hear the tone when
you activate it.

Press the
Back
soft key.
The System settings menu will appear.
The setting is saved.
Switching verification and
notification tones on and offOption
Symbol
Tone activated
Q
Tone deactivated
q

163 System settings
System settings

In the System settings menu, press the Display
soft key.You can use the following functions:

set the display dimming characteristics

adjust the display brightness
Setting the display dimming
characteristics

Push the joystick to G or g to
select an entry.Day modeThe display is continuously set to
daylight design.Night modeThe display is continuously set to night-
time design.AutomaticThe display changes depending on the
ambient light sensor in the vehicle.

Press E.
The setting is applied. The System
settings menu will appear.
Adjusting the display brightness

Press the
Bright.
soft key.

Push the joystick to H or h
direction to adjust the brightness.
Making display settingsOption
Symbol
Display mode selected
_
Display mode not
selected
-

164 System settingsSystem settingsor
Press the
Bright
. soft key longer than
2 seconds.
The display brightness changes
gradually. When the slider reaches the
end of the left or right border, it starts
moving into the opposite direction.

Release the
Bright.
soft key.
Confirming the setting

Press the
Back
soft key.
or

Press E.
The brightness setting is applied.

In the System settings menu, press the Reset
soft key.
The Reset inquiry menu will appear.
No

is highlighted.If you do not wish to reset to the factory
settings

Press the
Back
soft key or press E.
The System settings menu will appear.
Accepting the factory settings

Push the joystick to H or h
direction to select
Yes
.

Press E.
The message
All data has been
reset.
COMAND will now
restart. will appear.
Resetting all settings to the factory
settingsiAll your personal data, e.g. Last desti-
nation entries or Radio main menu pre-
set entries, will be deleted.
iThe factory settings are:
Time - Atlantic Time
Language - Instrument cluster
Verification tone - On
Notification tone - On
Display setting - Automatic