2005 MERCEDES-BENZ C-Class Comand Manual

149 Navigation
Software Updates
Loading
Insert the new navigation DVD into the
DVD slot with the label side up.
The message
Navigation is
initializing. Please wait.
will
appear.

Press l on the display unit to return
the display unit to its closed position.
The display unit tilts up and then moves
to the rear.After that, the COMAND loads the
software on the DVD.
Shortly after that, the progress bar
appears. After some time, the progress
bar reaches 100%.
The update is completed. You can now
operate the navigation system again.
iInserting a second DVD with another
DVD still loaded will cause damage to
the DVD drive which is not covered by
the Mercedes-Benz Limited Warranty.
iThe message
Press EJECT to
close
will appear. If l on the
display unit is not pressed within 20
seconds, eight successive series of two
beep tones will sound to remind you to
return the display to its closed position
by pressing l on the display unit.

150 NavigationSoftware Updates

151 Service
Service main menu
SMS*
Tele Aid*

152 ServiceService main menu

Service main menu
Press C.
The Service main menu will appear.
Service main menu
You can use the soft keys to open other
menus
SMS
soft key*:
Opens the SMS Inbox Folder
(
page 153).

Scr.off
soft key:

Press the
Scr.Off
soft key.
The screen is switched off.

Press any soft key or button.
The screen is switched on again.

System
soft key:
Switches to the system settings
(
page 160).
Activating the Service main menu iIf a service submenu is displayed, you
need to press the
Back
soft key.
iThe
SMS
soft key is visible if vehicle is
equipped for phone operation and
Mercedes-Benz specified mobile
telephone* is inserted in phone
cradle*.

153 ServiceSMS*

SMS*
With the SMS Received list, you can
receive SMS messages provided that SMS
messaging is available from your mobile
phone service provider.

Activate the Service main menu
(page 152).

Press the
SMS
soft key.
The Received list will appear.If the message
Empty
appears, there
are no SMS messages.
The status bar shows date and time of
the message.
One line is provided for each message.
Symbol = = Message unread
Symbol z = SMS message
iThe functions described here apply if
your vehicle is equipped with mobile
phone cradle* and a Mercedes-Benz
specified mobile phone*.iIf you have received new SMS
messages, n is displayed on the
status bar. Additionally, a message
received tone is played.
iIf another system is active (e.g. radio),
a window with the message
Received
a new SMS
appears when SMS
message is coming in.
SMS Received list

154 ServiceSMS*
Press the
Detail
soft key.
The list entry will appear in full in a
window.
Line-by-line scrolling through the SMS
Received list:

Push the joystick to g or G
to highlight the desired message.
Back to the Service main menu:

Press the
Back
soft key.

In the SMS Received (
page 153) list,
push the joystick to g or G to
highlight the desired message.

Press E.
The message is displayed. In the status
bar, the name or the phone number of
the sender will appear.Line-by-line scrolling through the message
text:

Push the joystick to g or G.
Back to the SMS Received list:

Press the
Back
soft key.
Reading SMS message received

155 Service
Tele Aid*

Tele Aid*
Tele Aid* incorporates the following
functions:
Emergency call system

Roadside Assistance

Information
For certain emergency situations, the
system automatically triggers an
emergency call. An emergency call can
also be triggered manually by pressing the
corresponding button. Refer to your
vehicle Operator’s Manual for additional
information.If the system initiates an emergency call,
Connecting
and theß symbol will
appear on the status bar. All active
connections are terminated.
During the emergency call,
Call

Connected
appears on the status bar. No
operation from COMAND is possible, so
you cannot disconnect the emergency call.Roadside Asssistance will assist if
technical problems with your vehicle are
experienced.
Roadside Assistance can be requested
manually by pressing the corresponding
button. Refer to your vehicle Operator’s
Manual for additional information.
Upon request of Roadside Assistance, the
system initiates the call to the Assistance.
Connecting
and theß symbol will
appear on the status bar. All active
connections are terminated except
Emergency call.
Emergency call system
Roadside Assistance

156 ServiceTele Aid*If the connection is made, the message Call
Connected
appears on the status
bar.
During activation of a Roadside Assistance
call, it is not possible to switch to another
application, but you can initiate an
Emergency call, if necessary.Terminating the connection

Press K.
COMAND reverts to the system last
active before Tele Aid was activated.
A call to the Response Center will be
initiated by pressing the corresponding
button. Information regarding the opera-
tion of your vehicle, the nearest authorized
Mercedes-Benz Center or Mercedes-Benz
USA products and services is available to
you. Refer to your vehicle Operator’s Man-
ual for additional information.
When an information call is initiated,
Connecting
and theß symbol will
appear on the status bar. All active
connections are terminated except
Emergency call and Roadside Assistance
call.When the connection is made, the
message
Call
Connected
appears on
the status bar.
During activation of an Information call, it
is possible to switch to another application
and initiate an Emergency call or Roadside
Assistance call, if necessary.
Information