10DATE OF ISSUE: May 2004
Symbols and CodesJaguar S-TYPE 2005
NOTE:In the examples on this page, an ‘X’ is used where a number would appear on an actual Figure.
Reference Symbols Control Module Pin Symbols
* May also indicate Reference Voltage.
** May also indicate Reference Ground or Logic Ground.
Refer to Control Module Pin-out Information.
Wiring Symbols
Battery power supply
Ignition switched auxiliary power supply (key I, II)
Ignition switched power supply (key II, III)
Switched System Power Supply power supply
Engine Management System power supply
Figure number reference
Controller Area Network
Standard Corporate Protocol network
D2B networkInput CAN network
Output SCP network
Battery voltage D2B network
Power ground Serial and encoded data
Sensor / signal supply V *
Sensor / signal ground **
Splice
Simplified splice Bulb
Capacitor
Connector Diode
Eyelet and stud Fuse
Ground
Hall effect sensor
Light emitting diode (LED)Motor
Potentiometer
Power distribution box terminal
Pressure transducer
Resistor
Solenoid
Suppression diode
Suppression resistor
Thermistor
Transistor
Wire continued
Zener diode
