Refer to the front of this book for detailed information and illustrations regarding the location and identification of harnesses, relays, fuses, grounds,
control modules and control module pins.
NOTE: The values listed are approximately those that can be expected at the control module connector pins with all circuit conn
ections made and all
components connected and fitted. The following abbreviations are used to represent values for Control Module Pin-Out data
I Input
O Output
B+ Battery Voltage PG Power Ground
SS Sensor / Signal Supply V
SG Sensor / Signal GroundC CAN Network
S SCP Network
D2 D2B Network D Serial and Encoded Data
V Voltage (DC)
PWM Pulse Width Modulated
CAUTION: The information on this data page is furnished to ai d the user in understanding circuit operation. THIS INFORMATION SH OULD BE USED FOR
REFERENCE ONLY.DATE OF ISSUE: May 2004
Fig. 18.1
FOR CONTROL MODULE PIN-OUT INFORMATION, UNFOLD PAGE TO LEFT, UNFOLD PAGE TO LEFT. COMPONENTS
Component Connector(s) Connector Description LocationFRONT LH CENTER SENSOR BF10 3-WAY / BLACK FRONT BUMPER, LH, CENTER
FRONT LH SENSOR BF11 3-WAY / BLACK FRONT BUMPER, LH
FRONT RH CENTER SENSOR BF9 3-WAY / BLACK FRONT BUMPER, RH CENTER
FRONT RH SENSOR BF8 3-WAY / BLACK FRONT BUMPER, RH
PARKING AID MODULE CA112 12-WAY / BLACK LUGGAGE COMPARTMENT, LH REAR
CA113 12-WAY / UNKNOWN
CA115 16-WAY / BLACK
PARKING AID SOUNDER, FRONT (INSTRUMENT CLUSTER) FC8 32-WAY / BLACK INSTRUMENT CLUSTER
PARKING AID SOUNDER, REAR CA32 2-WAY / BLACK PARCEL SHELF
PARKING AID SWITCH CA250 22-WAY / BLACK ROOF CONSOLE
REAR LH CENTER SENSOR BR3 3-WAY / BLACK REAR BUMPER, LH, CENTER
REAR LH SENSOR BR2 3-WAY / BLACK REAR BUMPER, LH
REAR RH CENTER SENSOR BR4 3-WAY / BLACK REAR BUMPER, RH CENTER
REAR RH SENSOR BR5 3-WAY / BLACK REAR BUMPER, RHHARNESS IN-LINE CONNECTORS
Connector Connector Description / Location LocationBR1 10-WAY / GREY / CABIN HARNESS TO REAR BUMPER HARNESS BEHIND REAR BUMPER, RH SIDEGROUNDS
Ground LocationCA50 RH LOWER ‘A’ POST, BELOW PRIMARY JUNCTION FUSE BOX
CA158 LUGGAGE COMPARTMENT, LH SIDE REAR CORNER
Parking Aid Module Pin Description and CharacteristicB+ CA112–1 IGNITION SWITCHED POWER SUPPLY: B+
O CA112–2 REAR SOUNDER –
PG CA112–3 POWER GROUND: GROUND
I CA112–4 PARKING AID SWITCH
I CA112–5 TRAILER CONNECTED STATUS: GROUND = TRAILER CONNECTED
I CA112–6 R EVERSE LAMPS STATUS: B+ = REVERSE LAMPS ON
O CA112–10 REAR SOUNDER +
D CA112–12 SERIAL DATA LINK
O CA112–13 PARKING AID STATUS LED
I CA112–15 SPEED SIGNAL
PG CA113–1 FRONT SENSORS GROUND: GROUND
O CA113–2 FRONT SENSORS POWER SUPPLY: B+
O CA113–3 FRONT SOUNDER OUTPUT
D CA113–5 FRONT LH SENSOR SIGNAL DATA
D CA113–6 FRONT LH CENTER SENSOR SIGNAL DATA
D CA113–7 FRONT RH CENTER SENSOR SIGNAL DATA
D CA113–8 FRONT RH SENSOR SIGNAL DATA
O CA115–1 REAR SENSORS POWER SUPPLY: B+
D CA115–2 REAR RH CENTER SENSOR SIGNAL DATA
D CA115–3 REAR LH CENTER SENSOR SIGNAL DATA
D CA115–4 REAR RH SENSOR SIGNAL DATA
D CA115–5 REAR LH SENSOR SIGNAL DATA
PG CA115–8 REAR SENSORS GROUND: GROUND
Refer to the front of this book for detailed information and illustrations regarding the location and identification of harnesses, relays, fuses, grounds,
control modules and control module pins.
NOTE: The values listed are approximately those that can be expected at the control module connector pins with all circuit conn
ections made and all
components connected and fitted. The following abbreviations are used to represent values for Control Module Pin-Out data
I Input
O Output
B+ Battery Voltage PG Power Ground
SS Sensor / Signal Supply V
SG Sensor / Signal GroundC CAN Network
S SCP Network
D2 D2B Network D Serial and Encoded Data
V Voltage (DC)
PWM Pulse Width Modulated
CAUTION: The information on this data page is furnished to ai d the user in understanding circuit operation. THIS INFORMATION SH OULD BE USED FOR
REFERENCE ONLY.DATE OF ISSUE: May 2004
Fig. 19.1
FOR CONTROL MODULE PIN-OUT INFORMATION, UNFOLD PAGE TO LEFT. COMPONENTS
Component Connector(s) Connector Description LocationACCESSORY CONNECTOR CA13 3-WAY / BLACK ADJACENT TO REAR ELECTRONIC CONTROL MODULE
ACCESSORY RELAY — — REAR POWER DISTRIBUTION FUSE BOX – R10
CIGAR LIGHTER CA109 3-WAY / BLACK CENTER CONSOLE
CIGAR LIGHTER / POWER POINT RELAY — — PRIMARY JUNCTION FUSE BOX – R1
ELECTRONIC ROAD PRICING MODULE SL5 NOT AVAILABLE INSTRUMENT PANEL
FRONT ELECTRONIC MODULE CA24 26-WAY / NATURAL LH ‘A’ POST CA31 20-WAY / BLACK
FH9 22-WAY / BLACK
FH59 12-WAY / BLACK
FH60 17-WAY / BLACK
FRONT POWER DISTRIBUTION FUSE BOX — — ENGINE COMPARTMENT, RH SIDE
HORN RELAY — — FRONT POWER DISTRIBUTION FUSE BOX – R12
HORNS FH29 2-WAY / BLACK FORWARD OF RADIATOR
INSTRUMENT CLUSTER FC8 32-WAY / BLACK INSTRUMENT CLUSTER
FC9 32-WAY / BLACK
POWER POINT CA237 3-WAY / BROWN ADJACENT TO CIGAR LIGHTER
PRIMARY JUNCTION FUSE BOX CA2 26-WAY / BLACK RH ‘A’ POST
CA56 8-WAY / BLACK
FC37 26-WAY / BLACK
FH7 6-WAY / BLACK
FH53 10-WAY / BLACK
REAR POWER DISTRIBUTION FUSE BOX — — LUGGAGE COMPARTMENT
ROOF CONSOLE CA250 22-WAY / BLACK ROOF HEADLINER
STEERING WHEEL HORN SWITCH SQ2 6-WAY / BLACK STEERING WHEEL
SUN SHADE MOTOR CA254 4-WAY / BLACK LH ‘D’ POST, ADJACENT TO SEAT BELT RETRACTORHARNESS IN-LINE CONNECTORS
Connector Connector Description / Location LocationFC10 14-WAY / GREEN / FASCIA HARNESS TO FRONT HARNESS BEHIND INSTRUMENT PANEL, RH SIDE
FC117 10-WAY / BLACK / STEERING WHEEL CASSETTE STEERING COLUMN
PI41 42-WAY / BLACK / ENGINE HARNESS TO VEHICLE HARNESSES ENGINE COMPARTMENT, BULKHEAD, PASSENGER SIDE
SL3 10-WAY / GREY / FASCIA HARNESS TO SOLAR SENSOR LINK BEHIND INSTRUMENT PANEL, RH SIDEGROUNDS
Ground LocationCA50 RH LOWER ‘A’ POST, BELOW PRIMARY JUNCTION FUSE BOX
CA52 LH ‘D’ POST, ADJACENT TO SEAT BELT RETRACTOR
CA141 UNDER LH FRONT SEAT
CA154 UNDER RH FRONT SEAT
CA156 LUGGAGE COMPARTMENT, RH SIDE
FC38 UNDER CENTER OF INSTRUMENT PANEL, ON TRANSMISSION TUNNEL
FH42 ENGINE COMPARTMENT, BEHIND RH HEADLAMP
FH77 LH LOWER ‘A’ POST, ADJACENT TO THE FRONT ELECTRONIC MODULE (FORWARD OF CA30)
NOTE: Refer to the Appendix at the rear of this book for Network Messages. Front Electronic Module Pin Description and CharacteristicS FH59–1 SCP –
B+ FH59–6 BATTERY POWER SUPPLY (LOGIC): B+
S FH59–7 SCP +
O FH59–8 HORN RELAY ACTIVATE: TO ACTIVATE, FEM SWITCHES CIRCUIT TO GROUND
B+ FH60–1 SWITCHED SYSTEM POWER SUPPLY: B+
PG FH60–11 POWER GROUND: GROUNDInstrument ClusterPin Description and CharacteristicI FC8–9 HORN SWITCH SIGNAL: ACTIVATE = MOMENTARY GROUND
B+ FC8–15 BATTERY POWER SUPPLY (LOGIC): B+
SG FC8–32 SIGNAL GROUND: GROUND
S FC9–25 SCP +
S FC9–26 SCP –
