Page 1351 of 4731
DI-90
LANE DEPARTURE WARNING SYSTEM
Revision: 2005 July 2005 FX
4. Touch “LDW”.
If “LDW” is not displayed, go to GI-39, "
CONSULT-II Data Link
Connector (DLC) Circuit" .
5. Touch “WORK SUPPORT”.
6. Touch “AUTO AIM”.
7. The target should be accurately placed. The vehicle should be stopped.
After confirming the above, touch “START” to perform aiming.
CAUTION:
Never touch “START” when the target is not placed.
SKIB1785E
PKIA8867E
PKIB4696E
SKIB3146E
Page 1352 of 4731
LANE DEPARTURE WARNING SYSTEM DI-91
C
D E
F
G H
I
J
L
M A
B
DI
Revision: 2005 July 2005 FX
8. Touch “NEXT”, then a keyboard window is displayed. And input
“Dh”, and then touch “ENTER”.
NOTE:
Check the value “Dh”. Refer to DI-89, "
VEHICLE HEIGHT
CHECK" .
9. Check the regulated value. (Spec.) NOTE:
Check the value input at step 8.
a. Touch “NEXT” if appropriate.
b. Touch “CHANGE SET” to change “Dh”.
10. Touch “NEXT”. CAUTION:
Never change “Ht”.
11 . To u c h “ N E X T ” . CAUTION:
Never change “Dt”.
SKIB3147E
SKIB3148E
SKIB3149E
SKIB3173E
Page 1353 of 4731
DI-92
LANE DEPARTURE WARNING SYSTEM
Revision: 2005 July 2005 FX
12. Touch “START”.
13. Check it display item.
a. “NORMALLY COMPLETED” is displayed, then touching “COM- PLETION”.
b. Perform the following services when displayed “SUSPENSION” or “ABNORMALLY COMPLETED”.
NOTE:
Replace camera unit if “suspension” is repeatedly indicated though the above two service is performed.
14. Check if “NORMALLY COMPLETED” is displayed and close the aiming adjustment procedure by touching “END”.
Check After The Adjustment
1. Perform the LDW camera unit self-diagnosis. Refer to DI-98, "CONSULT-II Function (LDW)" .
SKIB3150E
SKIB3151E
SKIB3152E
Displays item Service procedure
SUSPENSION 00H Routine not activated
Position the target appropriately again. Perform the aiming again.
Refer to DI-86, "
Camera Aiming Adjustment" .
10H Writing error
ABNORMALLY COMPLETED —
SKIB3153E
Page 1354 of 4731
LANE DEPARTURE WARNING SYSTEM DI-93
C
D E
F
G H
I
J
L
M A
B
DI
Revision: 2005 July 2005 FX
2. Test the LDW system operation by running test. Refer to DI-85, "LDW SYSTEM RUNNING TEST" .
Component Parts and Harness Connector LocationAKS00C7K
SKIB1789E
Page 1355 of 4731
DI-94
LANE DEPARTURE WARNING SYSTEM
Revision: 2005 July 2005 FX
SchematicAKS00C7L
TKWM2063E
Page 1356 of 4731
LANE DEPARTURE WARNING SYSTEM DI-95
C
D E
F
G H
I
J
L
M A
B
DI
Revision: 2005 July 2005 FX
Wiring Diagram — LDW —AKS00C7M
TKWM2064E
Page 1357 of 4731
DI-96
LANE DEPARTURE WARNING SYSTEM
Revision: 2005 July 2005 FX
TKWM2065E
Page 1358 of 4731
LANE DEPARTURE WARNING SYSTEM DI-97
C
D E
F
G H
I
J
L
M A
B
DI
Revision: 2005 July 2005 FX
TKWM2066E