2005 DODGE POWER WAGON phone

CAUTION!
An unlocked vehicle is an invitation to thieves.
Always remove the key from the ignition and lock
all the doors when leaving the vehicle unattended.
SENTRY KEY — IF EQUIPPED
With this system, an electronically coded ignition key
sends a signal to the vehicle electronics. If the electronics
recognizes the signal, the vehicle will start and continue
to run. If the system does not recognize the signal the
vehicle will start and run for a maximum of 2 seconds
after the initial key ON. After six unsuccessful attempts
at starting, the system will shut down until the correct
key is used.
NOTE:The Sentry Key Immobilizer System is not
compatible with remote starting systems. Use of these
systems may result in vehicle starting problems and aloss of security protection. Additional Sentry Keys or
Mobil Speed-pass™devices held against or immediately
adjacent to the ignition key when starting the engine may
cause vehicle starting problems. If a problem occurs,
remove the Sentry Key from the key-ring and attempt to
start the vehicle again. Pagers, cell phones, walkman, etc.
will have no effect on this system.
TheSecurity Light, located in the instrument cluster,
will illuminate for about 2 seconds when the ignition
switch is first turned to the ON position. If the vehicle
electronics do not receive a valid signal from the ignition
key, theSecurity Lightwill flash continuously to signal
that the vehicle has been immobilized. If theSecurity
Lightremains on during vehicle operation, it indicates a
fault in the system electronics. If this option was ordered,
all of the keys provided with your new vehicle have been
programmed to the vehicle electronics.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13
2

▫Exterior Mirrors Folding Feature...........86
▫Electronic Power Mirrors—If Equipped......87
▫Electric Rear Window Defroster And Heated
Sideview Mirrors—If Equipped...........88
▫Trailer Towing Mirrors—If Equipped.......88

Hands–Free Communication (UConnect™)
—If Equipped..........................90
▫Operation............................91
▫Phone Call Features....................95
▫Advanced Phone Connectivity.............97
▫UConnect™System Features..............99

Seats................................102
▫40-20-40 Front Seat....................102
▫Reclining Seats.......................103▫Adjustable Head Restraints..............104
▫Manual Rotary Lumbar Support Adjustment
—If Equipped.......................105
▫Power Seats—If Equipped..............105
▫Heated Seats—If Equipped.............107

To Open And Close The Hood.............108

Lights...............................109
▫Interior Lights.......................110
▫Battery Saver........................111
▫Headlamp Delay—If Equipped..........111
▫Headlights, Parking Lights, Panel Lights.....111
▫Daytime Running Lights (Canada And Fleet
Vehicles Only).......................112
▫Lights-On Reminder...................113
76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

HANDS–FREE COMMUNICATION (UConnect™)—
IF EQUIPPED
UConnect™is a voice-activated, hands-free, in-vehicle
communications system. UConnect™; allows you to dial
your cellular phone using simple voice commands (e.g.,
“Call”or“Dial”). Your cellular phone’s audio is trans-
mitted through your vehicle’s stereo system; the system
will automatically mute your radio before receiving or
sending a call.
UConnect™allows you to transfer calls between the
system and your cellular phone as you enter or exit your
vehicle, and enables you to mute the system’s micro-
phone for private conversations.The UConnect™; phone book enables you to store up to
32 names and four numbers per name. This system is
driven through your Bluetooth™Hands-Free Profile
cellular phone. UConnect™features Bluetooth™technol-
ogy - the global standard that enables different electronic
devices to connect to each other without wires or a
docking station, so UConnect™works no matter where
you stow your cellular phone (be it your purse, pocket, or
briefcase). UConnect™allows up to seven cellular
phones to be linked to the system, and it is available in
English, French, or Spanish formats (as equipped).
The rearview mirror contains the microphone for the
system and the control buttons that will enable you to
access the system. The diagram below shows the mirror
with the appropriate buttons. Individual button behavior
is discussed in the“Operation”Section.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

The UConnect™system can be used with any Hands
Free Profile certified Bluetooth™cellular phone. If your
cellular phone has a different profile (i.e. headset profile),
you will not be able to use any UConnect™features.
The UConnect™system is fully integrated into your
vehicle, including your vehicle’s stereo system. All voiceprompts as well as the other party’s voice in a conversa-
tion will be played over your vehicle’s stereo system. The
volume of the UConnect™system can be controlled
through your normal stereo controls.
The radio display will be used for visual prompts from
the UConnect™system such as caller ID.
Operation
Voice commands can be used in the operation of the
UConnect™system and to navigate through the UCon-
nect™menu structure. Voice commands should be given
after each UConnect™system prompt. You will be
prompted for a specific command and then guided
through the available options. There are two ways to give
commands to the UConnect™system:
•You can sayDialat theReadyprompt. When
prompted for the phone number you wish to dial, say
the phone number (123 456 7890).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91
3

Pairing a Cellular Phone to the UConnect™System
To begin using your UConnect™system, you must pair
your compatible Bluetooth™enabled cellular phone. To
complete the registration process, you will need to refer-
ence your cellular phone owner’s manual.
•Press the’Phone’button to begin.
•After theReadyprompt, saySetup.
•When prompted, say“Phone Pairing”.
•You will be asked to say a four-digit pin number into
the UConnect™system which you will later need to
enter into your cellular phone during the cellular
phone pairing process. You can enter any four-digit
pin number. You will not need to remember this pin
number after the initial registration process.
•The UConnect™system will then prompt you to begin
the cellular phone pairing process on your cellularphone. Please see your cellular phone user’s manual
for instructions on how to complete this step.
•For identification purposes, you will be prompted to
give the UConnect™system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
•You will then be asked to give your cellular phone a
priority level between 1 and 7, 1 having the highest
priority. You can connect up to seven cellular phones
to your UConnect™system and the priority allows the
UConnect™system to know which cellular phone to
use if multiple cellular phones are in the vehicle at the
same time. For example, if a priority 3 and priority 5
cellular phone are both in the vehicle, the UConnect™
system will use the priority 3 cellular phone when you
make a call. You can select to use a lower priority
cellular phone at any time.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Making a Phone Call Using Digit Dialing
•
Press the’Phone’button to begin.
•After theReadyprompt, sayDialorCallfollowed
by the phone number you wish to dial. For example,
you can sayDial”wait for ready prompt 123 456 7890.
The phone number that you enter must be a valid
length.
Making a Phone Call Using Your UConnect™
Phonebook
•
Press the“Phone”button to begin.
•After theReadyprompt, sayDialorCallwait for
the ready prompt followed by the name and designa-
tion of a phonebook entry that you wish to dial. For
example, you can sayCall John Doe Work.
Add Names to Your UConnect™Phonebook
•
Press the“Phone”button to begin.
•After theReadyprompt, sayPhonebook New En-
try.
•Or, After theReadyprompt, say“Phonebook”.
•When prompted, say“New Entry”.
•When prompted, say the name of the new entry.
•Next, enter the number designation (e.g.“Home”,
“Work”,“Mobile”,or“Pager”). This will allow you to
have multiple numbers for each phonebook entry.
•Recite the phone number for the phonebook entry that
you are adding.
After you are finished adding an entry into the phone-
book, you will be given the opportunity to add more
phone numbers to the current entry or to return to the
main menu.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93
3

The UConnect™system will allow you to enter up to 32
names into the phonebook with each name having up to
four associated phone numbers and designations.
Edit Entries in the UConnect™Phonebook
•
Press the’Phone’button to begin.
•After theReadyprompt, sayPhonebook Edit.
•You will then be asked for the name of the phonebook
entry that you wish to edit.
•Next, choose the number designation that you wish to
edit. The choices are home, work, mobile, or pager.
•Recite the new phone number for the phonebook entry
that you are editing.
After you are finished editing an entry in the phonebook,
you will be given the opportunities to edit another entry
in the phonebook, call the number you just edited, or
return to the main menu.Phonebook edit can be used to add another phone
number to a name entry that already exists in the
phonebook. For example, the entry John Doe may have a
mobile and a home number, but you can add John Doe’s
work number later through phonebook edit.
Delete Entries in the UConnect™Phonebook
•
Press the’Phone’button to begin.
•After theReadyprompt, sayPhonebook Delete.
•After you enter the phonebook delete menu, you will
then be asked for the name of the phonebook entry
that you wish to delete. You can either say the name of
a phonebook entry that you wish to delete or you can
sayList Namesto hear a list of the entries in the
phonebook from which you can choose. To select one
of the entries from the list, press theVoice Recogni-
tionbutton while the UConnect™system is playing
the desired entry and sayDelete.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

•After you enter the name, the UConnect™system will
ask you if you wish to delete the home, work, mobile,
or pager number for this entry.
Delete All Entries in the UConnect™Phonebook
•
Press the’Phone’button to begin.
•After theReadyprompt, sayPhonebook Delete All.
•The UConnect™system will ask you to verify that you
wish to delete all the entries from the phonebook.
•After confirmation, the phonebook entries will be
deleted.
List All Names in the UConnect™Phonebook
•
Press the’Phone’button to begin.
•After theReadyprompt, sayPhonebook List
Names.
•The UConnect™system will play the names of all the
phonebook entries.
•To call one of the names in the list, press the’Voice
Recognition’button during the playing of the desired
name and sayCall.
•The UConnect™system will then prompt you as to
number designation you wish to call.
•The selected number will be dialed.
Phone Call Features
The following feature(s) can be accessed through the
UConnect™system if the feature(s) are available on your
cellular service plan. For example, if your cellular service
plan provides three-way calling, this feature can be
accessed through the UConnect™system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95
3