2005 DODGE GRAND CARAVAN lights

[x] Cancel search: lights

Page 136 of 480

DODGE GRAND CARAVAN 2005  Owners Manual Interior light Defeat (OFF)
Rotate the dimmer control to the
OFF position (extreme bottom).
The interior lights will remain off
when the doors or liftgate are
open.
Parade Mode (Daytime Brightness Fea

Page 137 of 480

DODGE GRAND CARAVAN 2005  Owners Manual Daytime Running Lights (Canada/Fleet Vehicles
Only)
The Daytime Running Lights will come on whenever the
vehicle is running, the headlights are off, and the parking
brake is off. The headlight switch

Page 138 of 480

DODGE GRAND CARAVAN 2005  Owners Manual Headlamp Delay — If Equipped
This feature provides the safety of headlight illumination
for up to 90 seconds, when leaving your vehicle in an
unlighted area.
To activate the delay feature, turn off

Page 139 of 480

DODGE GRAND CARAVAN 2005  Owners Manual If either indicator flashes at a rapid rate, check for a
defective outside turn signal light bulb. If one of the
indicators fails to light when the lever is moved, it would
suggest that the indicator

Page 143 of 480

DODGE GRAND CARAVAN 2005  Owners Manual TRACTION CONTROL SWITCH — IF EQUIPPED
The TRAC indicator, located below the instrument cluster
odometer, will light up when the Traction Control is in use.
To turn the system OFF, press the TRAC OFF

Page 150 of 480

DODGE GRAND CARAVAN 2005  Owners Manual WARNING!Speed Control can be dangerous where the system
can ’ t maintain a constant speed. Your vehicle could
go too fast for the conditions, and you could lose
control. An accident could be the res

Page 151 of 480

DODGE GRAND CARAVAN 2005  Owners Manual The lights also turn on when a front door, a sliding door
or the liftgate is opened. If your vehicle is equipped with
Remote Keyless Entry, the lights will also turn on when
the unlock button on the t

Page 158 of 480

DODGE GRAND CARAVAN 2005  Owners Manual If this feature is not selected, the driver ’ s seat, driver ’ s
mirror, adjustable pedals, and radio settings can only
return to their memory set positions using the memory
recall buttons (1or 2)